Effects of substrate roughness on corrosion resistance of electrodeposited calcareous films
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study explores the impact of substrate roughness on the adsorption of calcareous films through electrodeposition on substrates with roughness values of 1.0 μm and 0.3 μm. Test specimens were systematically fabricated by varying the roughness, electrodeposition time, and applied current density. The morphology of the fabricated samples was analyzed using scanning electron microscopy, which provided insights into their crystal size and surface characteristics. The structural properties of the deposited films were elucidated using X-ray diffraction. The corrosion behavior was systematically investigated using electrochemical polarization and 3% NaCl immersion tests. Notably, the samples electrodeposited on substrates with higher roughness exhibited larger crystallite sizes than those electrodeposited on substrates with lower roughness. The immersion experiment revealed a decrease in corrosion progression with increasing deposition time and substrate roughness. These results agree well with the results of the electrochemical corrosion test.
Abstract
This study explores the impact of substrate roughness on the adsorption of calcareous films through electrodeposition on substrates with roughness values of 1.0 μm and 0.3 μm. Test specimens were systematically fabricated by varying the roughness, electrodeposition time, and applied current density. The morphology of the fabricated samples was analyzed using scanning electron microscopy, which provided insights into their crystal size and surface characteristics. The structural properties of the deposited films were elucidated using X-ray diffraction. The corrosion behavior was systematically investigated using electrochemical polarization and 3% NaCl immersion tests. Notably, the samples electrodeposited on substrates with higher roughness exhibited larger crystallite sizes than those electrodeposited on substrates with lower roughness. The immersion experiment revealed a decrease in corrosion progression with increasing deposition time and substrate roughness. These results agree well with the results of the electrochemical corrosion test.
참고문헌 (16)
- P. Pedeferri, "Cathodic protection and cathodic prevention", Construction and Building Materials, 10(5), pp.391~402 (1996)
- U. M. Angst, "A critical review of the science and engineer-ing of cathodic protection of steel in soil and concrete", Cor-rosion, 75(12), pp.1420~1433 (2019)
- L. Xu, "Chal-lenges and solutions of cathodic protection for marine ships", Corrosion Communications, 2, pp.33~40 (2021)
- W. H. Hartt, "Calcareous de-posits on metal surfaces in seawater - A critical review", Cor-rosion, 40(11), pp.609~618 (1984)
- 박준무, "해양환경 중 음극전류 프로세스에 의해 강판에 형성된 석회질 피막의 특성 분석", 한국표면공학회지, 49(2), pp.166~171 (2016), 한국표면공학회[DOI]
- S. H. Lee, "Adhesion and corrosion resistance of Mg(OH)2 films pre-pared by application principle of cathodic protection in natural seawater", Journal of the Korean Institute of Surface Engi-neering, 49(1), pp.1~8 (2013)
- S. Verma, "A review on pro-tective polymeric coatings for marine applications", Journal of Coatings Technology and Research, 16, pp.307~338 (2019)
- P. A. Sørensen, "Anticorrosive coatings : a review", Journal of Coatings Tech-nology and Research, 6, pp.135~176 (2009)
- D. G. Lee, "Investigation of coating failure on the surface of a water ballast tank of an oil tanker", Journal of Adhesion Science and Technology, 19(10), pp.879~908 (2005)
- C. S. Lim, "Evaluation of technical feasibility on applying calcareous deposit coat-ings to ship ballast tanks", Corrosion Reviews, 18(2-3), pp.181~194 (2000)
- Y. F. Yang, "Underprotec-tion of mild steel in seawater and the role of the calcareous film", Corrosion, 68(5), pp.432~440 (2012)
- P. Refait, "Corrosion and cathodic protection of carbon steel in the tidal zone: Products, mechanisms and kinetics", Corrosion Sci-ence, 90, pp.375~382 (2015)
- M. M. Kunjapur, "Influence of Temperature and Exposure Time upon Calcareous Deposits", Corrosion, 43(11), pp.674~679 (1987)
- 이찬식, "천연해수 중 온도 변화에 따라 전착한 환경친화적인 석회질 피막의 특성 분석", 한국마린엔지니어링학회지, 39(7), pp.779~785 (2015), 한국마린엔지니어링학회[DOI]
- S. Elbeik, "The for-mation of calcareous deposits during the corrosion of mild steel in sea water", Corrosion Science, 26(9), pp.669~680 (1986)
- P. Grosfils, "Impact of surface roughness on crystal nucleation", Crystals, 11(1), pp.4~ (2020)