내측연결 임플란트 시스템에서 고정체와 지대주 연결부의 적합에 관한 연구

참고문헌 (27)

1. Binon PP, "Implants and components:Entering the new millennium", 5, pp.76~94 (2000)
2. Martin WC, "Implant abutment screw rotations andpreloads for four different screw materialsand surfaces", 86, pp.24~32 (2001)
3. Sakaguchi RL, "Nonlinear finiteelement contact analysis of preload dentalimplant components", pp.655~661 (1993)
4. Brunski JE, "In the forces on endostealimplant;A measurement systemand biomechanical consideration", 51, pp.82~ (1984)
5. Sones AD, "Complication with osseointegratedimplants", 62, pp.581~585 (1989)
6. Boggan RS, "Influence of hex geometry andprostetic table width on statig and fatiguestrength of dental implants", 82, pp.436~440 (1999)
7. Abrahamsson I, "Softtissue response to plaque formation atdifferent implant systems", 9, pp.73~79 (1998)
8. Quirynen M, "Microvial penetrationalong the implant components of theBranemark system An in vitro study", pp.239~244
9. Gross M, "Microleakage at the abutment- implant interfaceof osseointegrated implants", 14, pp.94~100 (1999)
10. Besimo CE, "Prevention of bacterial leakage intoand from prefabricated screw-retainedcrowns on implants in vitro", 14, pp.654~660 (1999)
11. Becker W, "Replacement ofmaxillary and mandibular molars withsingle endosseous implant restorations: Aretrospective study", 80, pp.184~192 (1995)
12. Jemt T, "Osseointegrated implantsfor single tooth replacement", 6, pp.29~36
13. Levine RA, "A multicenter retrospectiveanalysis of ITI implant system usedfor single-tooth replacements: Preliminaryresults at six or more months of loading", 12, pp.237~242 (1997)
14. Norton MR, "An in vitro evaluation of thestrength of an internal conical interface comparedto a butt joint interface in implantdesign", 8, pp.290~298 (1997)
15. Norton MR, "Assessment of cold weldingproperties of internal conical interfacetwo commercially available implant system", 81, pp.159~166 (1999)
16. Burguette RL, "Tightening characteristic forscrewed joint in osseointegrated dental implant", 71, pp.592~599 (1994)
17. Binon PP, "Evaluation of three slip fithexagonal implants", 5, pp.253~248 (1996)
18. Binon PP, "The effect of implant", abutmenthexagonal misfit on screw joint stability, 1996, pp.9, 149~152
19. Binon PP, "The effect ofeliminating implant", abutment rotationalmisfit on screw joint stability, 1996, pp.9, 511~519
20. Byren D, "The fit of cast and premachined implantabutments", 80, pp.184~192 (1998)
21. Carr AB, "Effect offabrication,finishing,and polishing procedureson preload in prostheses usingconventional gold and plastic cylinders", 11, pp.589~598 (1996)
22. Carr AB, "The effectof finishing and polishing techniques in implantcylinder preload; 9th Annual Meetingof the Academy of Osseointergration(Abstract).", 10, pp.123~124 (1995)
23. Kim NH, "A study on the fit of the implant-abutmentscrewinterface", 41, pp.503~518 (2003)
24. Beat R, "Mechanics of the implant-abutmentconnection: An 8-degree taper comparedto a butt joint connection", 15, pp.519~526 (2000)
25. Ekfeldt A, "Clinical evaluation of single-toothrestorations supported by osseointegratedimplants", pp.179~183
26. Krennmair G, "Single-tooth replacement with frialit-2 system: A retrospective clinical analysisof 146 implants", 17, pp.78~85 (2002)
27. Persson LG, "Bacterial colonization on internalsurfaces of Branemark system implantcomponents", 7, pp.90~95 (1996)

관련 논문AI추천