잠정수복물의 최종수복물로의 디지털 복제를 통한 완전구강회복 증례: Double scan technique
Digital duplication of provisional prosthesis to fabricate definitive prosthesis for full mouth rehabilitation using double scan technique
0
조회
0
다운로드
7
인용
0
참고문헌
키워드
초록
CAD-CAM 기술의 사용은 다양한 부분에서 치료의 결과를 향상시킨다. 본 증례는 법랑질형성부전증 환자를 디지털 기술을 이용해 치료한 전악구강회복 증례이다. 임상적 검사 결과 occlusal stop의 부재로 저작기능의 저하와 치아 상실, 왜소치로 인한 치간사이 공간, 불충분한 수직피개 등의 문제점이 파악되었다. 하악의 치아 상실 부위를 수복키 위해 CAD-CAM 수술 스텐트를 이용한 임플란트 식립이 진행되었고 추가적으로 부족한 골량을 보강하기 위해 골유도재생술이 동반되었다. 상하악 자연치는 모두 전장관수복을 통해 새로운 교합평면설정 및 안정적인 수직교합관계를 형성하였다. ARCUS digma 장비를 통한 잠정수복물 평가 후 디지털 기술을 이용하여 잠정수복물 상태의 수복물을 더블스캔을 통한 복제를 하여 최종수복물을 제작, 환자에게 수복하여 전악수복을 완성하였다. 이를 통해 치료의 효율성과 예지성 있는 결과, 환자의 적응기간 감소와 기능적, 심미적으로 높은 만족도 등을 이루어냈다.
Abstract
Using Computer aided design and manufacturing technique improve quality of treatment in many aspect. This case reports the complete mouth rehabilitation of a patient with amelogenesis imperfecta utilizing digital technology. Clinical examination revealed loss of mastication due to insufficient occlusal stop, missing teeth, interdental spacing due to microdontia, insufficient overbite, and etc. Full veneer crowns for teeth were selected, followed by a fixed partial denture and implant placement was done using CAD-CAM guide template with bone graft for partially edentulous space. Definitive restorations were duplicated by double scanning provisional restorations and successfully delivered to the patient. These full mouth rehabilitation procedures resulted in satisfactory outcomes for the patient functionally and aesthetically.
참고문헌 (16)
- Kapos T, "Computer-aided design and computer-assisted manufacturing in prosthetic implant dentistry", Int J Oral Maxillofac Implants, 24, pp.110~117 (2009)
- Becker CM, "Surgical guide for dental implant placement", J Prosthet Dent, 83, pp.248~251 (2000)
- Sójka A, "Evaluation of mandibular movement functions using instrumental ultrasound system", J Prosthodont, 26, pp.123~128 (2017)
- Crawford PJ, "Amelogenesis imperfecta", Orphanet J Rare Dis, 2, pp.17~ (2007)
- Sanz-Sánchez I, "Effectiveness of lateral bone augmentation on the alveolar crest dimension : A systematic review and meta-analysis", J Dent Res, 94, pp.128S~142S (2015)
- Sarment DP, "Accuracy of implant placement with a stereolithographic surgical guide", Int J Oral Maxillofac Implants, 18, pp.571~577 (2003)
- Shupe RJ, "Effects of occlusal guidance on jaw muscle activity", J Prosthet Dent, 51, pp.811~818 (1984)
- Curtis DA, "Occlusal considerations for implant restorations in the partially edentulous patient", J Calif Dent Assoc, 28, pp.771~779 (2000)
- Faria-e-Silva AL, "Hardness and microshear bond strength to enamel and dentin of permanent teeth with hypocalcified amelogenesis imperfecta", Int J Paediatr Dent, 21, pp.314~320 (2011)
- Sun Y, "Accuracy of dental implant placement using CBCT-derived mucosa-supported stereolithographic template", Clin Implant Dent Relat Res, 17, pp.862~870 (2015)
- Schneider D, "In-vitro evaluation of the tolerance of surgical instruments in templates for computer-assisted guided implantology produced by 3-D printing", Clin Oral Implants Res, 26, pp.320~325 (2015)
- Stober T, "Enamel wear caused by monolithic zirconia crowns after 6 months of clinical use", J Oral Rehabil, 41, pp.314~322 (2014)
- Sulaiman TA, "Optical properties and light irradiance of monolithic zirconia at variable thicknesses", Dent Mater, 31, pp.1180~1187 (2015)
- Bremer F, "In vivo biofilm formation on different dental ceramics", Quintessence Int, 42, pp.565~574 (2011)
- Roediger M, "Prospective evaluation of zirconia posterior fixed partial dentures : four-year clinical results", Int J Prosthodont, 23, pp.141~148 (2010)
- Sailer I, "Randomized controlled clinical trial of zirconia-ceramic and metal-ceramic posterior fixed dental prostheses : a 3-year follow-up", Int J Prosthodont, 22, pp.553~560 (2009)