임시 의치와 이중 디지털 스캐닝 기법을 활용한 전악 고정성 임플란트 수복 증례
Full mouth rehabilitation with fixed implant-supported prosthesis using temporary denture and double digital scanning technique: a case report
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
임플란트 고정성 보철물 제작 시 디지털 시스템을 이용하여 수복할 때, 3차원적인 임플란트 위치의 구내 스캔과 임시 의치 혹은 임시 보철물 장착 후 구내 스캔을 이용한 이중 디지털 스캐닝(double digital scanning) 기법이 필요하다. 구내 스캔 시, 스캔 바디를 안정적인 랜드마크로 이용하면 다지털 인상의 정확도 향상과 기공과정이 효율적이고 단순화될 수 있다. 본 증례는 완전 디지털 시스템을 활용하여 맞춤형 치과용 임플란트 지대주 및 임시 보철물, 최종 보철물을 계획하고 제작하였다. 임플란트 식립 후, 임플란트에 체결한 구내 스캔 바디와 임시 의치 조직면에 인기 된 구내 스캔 바디의 스캔 영역을 중첩하였다. 중첩된 파일에서 임시 의치의 수직 고경에 맞는 맞춤형 치과용 임플란트 지대주와 임시 보철물을 제작하여 환자에게 시적 하였고, 임시 보철물을 토대로 최종 보철물을 제작하였다. 임시 의치 제작 시 설정한 수직 고경, 중심위 등을 최종 보철물까지 활용하여 기능 및 심미적으로 만족할 만한 결과를 얻어 이를 보고하고자 한다.
Abstract
When restoring with a dental digital system for implant-supported prosthesis, a double digital scanning technique is required: an intraoral scan of the three-dimensional implant location and intraoral scan after placement of temporary denture or provisional prosthesis. During the intraoral scan, the use of scan body as a stable landmark can improve the accuracy of digital impression and simplify laboratory process. In this case, a full-digital system was used to plan and fabricate a custom abutment, provisional prosthesis, and definitive prosthesis. After implant placement, the scan area of the intraoral scan body connected with implant and the intraoral scan body marked on the inside of temporary denture were superimposed. Out of the superimposed files, a custom abutment and provisional prosthesis were fabricated which match the vertical dimension of temporary denture, and definitive prosthesis was fabricated based on provisional prosthesis. We report this case because result has been functionally and esthetically satisfactory by using vertical dimension and central relation set during the fabrication of temporary denture to the definitive prosthesis.
참고문헌 (18)
- Filius MAP, "Long-term implant performance and patients’satisfaction in oligodontia", J Dent, 71, pp.18~24 (2018)
- Huang R, "Improved scanning accuracy with newly designed scan bodies : an in vitro study comparing digital versus conventional impression techniques for complete-arch implant rehabilitation", Clin Oral Implants Res, 31, pp.625~633 (2020)
- Abdel-Azim T, "The influence of digital fabrication options on the accuracy of dental implant-based single units and complete-arch frameworks", Int J Oral Maxillofac Implants, 29, pp.1281~1288 (2014)
- Marinis A, "Digital workflow for double complete arch zirconia prostheses utilizing a novel scan body", J Prosthodont, 31, pp.4~8 (2022)
- Papaspyridakos P, "Digital workflow for implant rehabilitation with double fullarch monolithic zirconia prostheses", J Prosthodont, 29, pp.460~465 (2020)
- Moura GF, "Denture scanning technique for computer-guided implant-supported restoration treatment of edentulous patients", J Prosthet Dent, 125, pp.726~731 (2021)
- Hassan B, "A digital approach integrating facial scanning in a CAD-CAM workflow for complete-mouth implant-supported rehabilitation of patients with edentulism : a pilot clinical study", J Prosthet Dent, 117, pp.486~492 (2017)
- Papaspyridakos P, "Complete digital workflow in prosthesis prototype fabrication for complete-arch implant rehabilitation : a technique", J Prosthet Dent, 122, pp.189~192 (2019)
- Syrek A, "Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling", J Dent, 38, pp.553~559 (2010)
- Zitzmann NU, "Treatment plan for restoring the edentulous maxilla with implant-supported restorations : removable overdenture versus fixed partial denture design", J Prosthet Dent, 82, pp.188~196 (1999)
- Jivraj S, "Treatment planning of the edentulous maxilla", Br Dent J, 201, pp.261~279 (2006)
- Kim Y, "Occlusal considerations in implant therapy : clinical guidelines with biomechanical rationale", Clin Oral Implants Res, 16, pp.26~35 (2005)
- Venezia P, "Digital cross-mounting : a new opportunity in prosthetic dentistry", Quintessence Int, 48, pp.701~709 (2017)
- Ravidà A, "Clinical outcomes and cost effectiveness of computer-guided versus conventional implant-retained hybrid prostheses : a long-term retrospective analysis of treatment protocols", J Periodontol, 89, pp.1015~1024 (2018)
- Kanno T, "A review of the shortened dental arch concept focusing on the work by the Käyser", Nijmegen group, 2006, pp.33, 850~862
- Bohner L, "Accuracy of digital technologies for the scanning of facial, skeletal, and intraoral tissues : a systematic review", J Prosthet Dent, 121, pp.246~251 (2019)
- Kim JE, "Accuracy of intraoral digital impressions using an artificial landmark", J Prosthet Dent, 117, pp.755~761 (2017)
- Michelinakis G, "The direct digital workflow in fixed implant prosthodontics : a narrative review", BMC Oral Health, 21, pp.37~ (2021)