임플란트 경부의 역사면 디자인이 변연골 응력분포에 미치는 영향
The effect of implant system with reverse beveled platform design on marginal bone stress distribution
4
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
연구 목적: 임플란트 경부 역사면의 디자인이 변연골 응력분포에 미치는 영향을 알아보기 위해 유한요소법을 사용하여 비교분석하였다. 연구 재료 및 방법: 경부 직경 5.5 mm, 길이 8 mm의 매립형 (submerged type) 고정체 (Dentis Co., Daegu, Korea)를 연구모델로 선정하였다. 임플란트 경부 역사면의 디자인을 높이 (h, 0.4 mm, 1.0 mm)와 폭경({5.5 - (3.34 + 2b)} / 2, [b, 0.2 mm, 0.3 mm, 0.4 mm])을 다르게 하여 총 여섯 가지의 실험 임플란트 조합으로 구분하였다. 축대칭 유한요소모델링을 이용하여 임플란트/악골 복합체에 대해 임플란트 장축에 평행한 방향으로 치관 교합면의 중심부에 수직 하중 100 N이 작용할 때 변연골의 최대압축응력을 산출하여 비교하였다. 결과: 여섯 개의 모든 실험 임플란트 모델에서 변연골의 응력집중이 관찰되지 않았다. 변연골 응력은 임플란트 경부 역사면의 폭과 높이의 차이에 따라 달라지는 것이 관찰되었으며 사면각이 클수록 응력 집중이 증가하는 경향을 보였다. 결론: 임플란트 경부 역사면 디자인의 부여는 변연골 응력 분포 개선에 중요한 역할을 할 수 있을 것으로 여겨진다.
Abstract
Purpose: The purpose of this study was to investigate the effects of the surface morphology of the implant neck on marginal bone stress measured by using finite element analysis in six implant models. Materials and methods: The submerged type rescue implant system (Dentis co., Daegu, Korea) was selected as an experimental model. The implants were divided into six groups whose implant necks were differently designed in terms of height (h, 0.4 and 1.0 mm) and width (platform width, w = 3.34 + 2b [b, 0.2, 0.3 and 0.4 mm]). Finite element models of implant/bone complex were created using an axisymmetric scheme. A load of 100 N was applied to the central node on the top of crown in parallel with the implant axis. The maximum compression stress was calculated and compared. Results: Stress concentration commonly observed around dental implants did not occur in the marginal bone around all six test implant models. Marginal bone stress varied according to the implant neck bevel which had different width and height. The stress was affected more markedly by the difference in height than in width. Conclusion: This result indicates that the implant neck bevel may play an important role in improving stress distribution in the marginal bone area.
참고문헌 (30)
- Hansson S, "The implant neck: smooth or provided with retention elements. A biomechanical approach", Clin Oral Implants Res, 10, pp.394~405 (1999)
- Tada S, "Influence of implant design and bone quality on stress", strain distribution in bone around implants: a 3-dimensional finite element analysis, 2003, pp.18, 357~368
- Petrie CS, "Comparative evaluation of implant designs: influence of diameter, length, and taper on strains in the alveolar crest. A three-dimensional finite-element analysis", Clin Oral Implants Res, 16, pp.486~494 (2005)
- Holmes DC, "Influence of bone quality on stress distribution for endosseous implants", J Oral Implantol, 23, pp.104~111 (1997)
- Kitagawa T, "Influence of cortical bone quality on stress distribution in bone around dental implant", Dent Mater J, 24, pp.219~224 (2005)
- Sevimay M, "Threedimensional finite element analysis of the effect of different bone quality on stress distribution in an implant-supported crown", J Prosthet Dent, 93, pp.227~234 (2005)
- Barbier L, "Finite element analysis of non-axial versus axial loading of oral implants in the mandible of the dog", J Oral Rehabil, 25, pp.847~858 (1998)
- Kitamura E, "Biomechanical aspects of marginal bone resorption around osseointegrated implants: considerations based on a three-dimensional finite element analysis", Clin Oral Implants Res, 15, pp.401~412 (2004)
- Kitamura E, "Influence of marginal bone resorption on stress around an implant-a three-dimensional finite element analysis", J Oral Rehabil, 32, pp.279~286 (2005)
- Natali AN, "Analysis of bone-implant interaction phenomena by using a numerical approach", Clin Oral Implants Res, 17, pp.67~74 (2006)
- Chang M, "Implant supported single-tooth replacements compared to contralateral natural teeth. Crown and soft tissue dimensions", Clin Oral Implants Res, 10, pp.185~194 (1999)
- Albrektsson T, "The long-term efficacy of currently used dental implants: a review and proposed criteria of success", Int J Oral Maxillofac Implants, 1, pp.11~25 (1986)
- Frost HM, "Wolff's Law and bone’s structural adaptations to mechanical usage: an overview for clinicians", Angle Orthod, 64, pp.175~188 (1994)
- Rubin CT, "Regulation of bone mass by mechanical strain magnitude", Calcif Tissue Int, 37, pp.411~417 (1985)
- Duyck J, "The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental study", Clin Oral Implants Res, 12, pp.207~218 (2001)
- Schrotenboer J, "Effect of microthreads and platform switching on crestal bone stress levels: a finite element analysis", J Periodontol, 79, pp.2166~2172 (2008)
- Lee DW, "Effect of microthread on the maintenance of marginal bone level: a 3-year prospective study", Clin Oral Implants Res, 18, pp.465~470 (2007)
- 정재민, "임플란트 경부형상이 주위골 응력에 미치는 영향에 관한 유한요소법적 분석", 대한치과보철학회지, 47(4), pp.374~405 (2009), 대한치과보철학회
- Li YF, "Comparative and analysis study of peri-implant bone stress around Rescue implant and standard implant using finite element method", 석사, Department of Dentistry, pp.2009
- Engineering Mechanics Research Corporation (EMRC), "NISA II", DISPLAY III User’s Manuel, 1998
- Langer B, "The wide fixture: a solution for special bone situations and a rescue for the compromised implant. Part 1", Int J Oral Maxillofac Implants, 8, pp.400~408 (1993)
- Covani U, "Bucco-lingual crestal bone changes after immediate and delayed implant placement", J Periodontol, 75, pp.1605~1612 (2004)
- Broggini N, "Persistent acute inflammation at the implant-abutment interface", J Dent Res, 82, pp.232~237 (2003)
- Hermann JS, "Crestal bone changes around titanium implants. A histometric evaluation of unloaded non-submerged and submerged implants in the canine mandible", J Periodontol, 71, pp.1412~1424 (2000)
- Piattelli A, "Role of the microgap between implant and abutment: a retrospective histologic evaluation in monkeys", J Periodontol, 74, pp.346~352 (2003)
- Tarnow DP, "The effect of inter-implant distance on the height of inter-implant bone crest", J Periodontol, 71, pp.546~549 (2000)
- Hartman GA, "Initial implant position determines the magnitude of crestal bone remodeling", J Periodontol, 75, pp.572~577 (2004)
- Sanavi F, "Biologic width and its relation to periodontal biotypes", J Esthet Dent, 10, pp.157~163 (1998)
- Oh TJ, "The causes of early implant bone loss: myth or science?", J Periodontol, 73, pp.322~333 (2002)
- Misch CE, "Contemporary Implant Dentistry", pp.545~ (2008), Mosby