CAD/CAM 세라믹 인레이에 대한 3종의 레진 시멘트의 전단결합강도에 관한 연구
Shear bond strength of the three different kinds of resin cement on CAD/CAM ceramic inlay
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
연구 목적: 본 연구는 최근 심미수복에 주로 사용되는CAD/CAM 세라믹 인레이와 각종 레진 시멘트간의 결합강도를 알아보고자 하였다. 연구 재료 및 방법: 원기둥모양의세라믹블록(높이: 5 mm, 직경: 3 mm)을Cerec3로제작하고, 총90개의우식이없는대구치의상아질표면에세종류의레진시멘트(Unicem(R), Biscem(R), Variolink II(R))를 사용하여 각각 제조업체의 지시에 따라 접착했다. 90개의 시편을 레진 시멘트의 종류에 따라 3개의 군으로 나누고, 각 군의 절반은 5 - 55℃, 5,000 cycle 조건 하에서 thermocycling을 시행하였고, 다른 절반은 시행하지 않았다. 모든 시편은 결합강도를 측정하기 전에 37℃ 생리 식염수에 24시간 동안 보관되었다. 전단결합강도는 만능시험기를 이용하여 0.5 mm/min의 cross head speed로 측정하였다. 결과 값은 t-test 및 one-way ANOVA를 사용하여 통계 분석하였다. 결과: Unicem(R)군의 전단결합강도가 thermocycling 후에 약간 감소했으나 3 개의 군 중 가장 높은 결합 강도를 보였다. Unicem(R)및 Valiolink II(R)군의 전단결합강도가 thermocycling에 영향을 받았지만 Biscem(R)은 영향을 받지 않았다(P<.05). Thermocyling 전에는 3개의 군 간의 결합강도에 유의한 차이가 없었지만, thermocyling 후에는 Unicem(R)과 Valiolink II(R)군 간에 유의한 차이가 있었다(P<.05). 결론:CAD/CAM 세라믹 인레이 수복물을 치아에 접착할 때, etch-and-rinse 레진 시멘트인 Valiolink II(R)대신self-adhesive 레진 시멘트인 Unicem(R)과 Biscem(R)을 사용해도 임상적으로 유용하다.
Abstract
Purpose: The purpose of this study was to evaluate the bond strengths between the latest CAD/CAM ceramic inlay and various resin cements which are used primarily for esthetic restoration. Materials and methods: Cylindrical ceramic blocks(Height: 5 mm, diameter: 3 mm) were fabricated by using Cerec3 and bonded on the dentin of the ninety extracted caries-free molars using three different kinds of resin cement(Unicem(R), Biscem(R), and Variolink II(R)) according to the manufacturer's instructions. Ninety specimens were divided into 3 groups according to three different kinds of resin cement. Half of each group were conducted thermocycling under the conditions of the 5 - 55℃, 5,000 cycle but the other half of them weren't. All specimens were kept in normal saline 37℃, for 24 hours before measuring the bond strength. The shear bond strength was measured by Universal testing machine with a cross head speed of 0.5 mm/min. The results were analyzed statistically by t-test and one-way ANOVA. Results: Unicem(R) group showed the highest shear bond strength despite a slight decline by thermocycling. The shear bond strength of Unicem(R) group and ValiolinkII(R) group were significantly influenced by thermocycling, whereas Biscem(R) group was not influenced (P<.05). There were no significant differences in the bond strength between the three groups without thermocycling, but there was significant differences between Unicem(R) group and Valiolink II(R) group with thermocycling(P<.05). Conclusion: It has been shown to be clinically effective when the self-adhesive resin cements Unicem(R) and Biscem(R) were used instead of the etch-and-rinse resin cement Valiolink II(R) during the bonding of CAD/CAM ceramic inlay restorations with teeth.
참고문헌 (29)
- Irie M, "Current luting cements: marginal gap formation of composite inlay and their mechanical properties", Dent Mater, 17, pp.347~353 (2001)
- Hayashi M, "Eight-year clinical evaluation of fired ceramic inlays", Oper Dent, 25, pp.473~481 (2000)
- Hayashi M, "6-year clinical evaluation of fired ceramic inlays", Oper Dent, 23, pp.318~326 (1998)
- Fasbinder DJ, "A clinical evaluation of chairside lithium disilicate CAD", CAM crowns: a two-year report, 2010, pp.141, 10~4S
- Wiedhahn K, "From blue to white: new high-strength material for Cerec-IPS e.max CAD LT", Int J Comput Dent, 10, pp.79~91 (2007)
- Diaz-Arnold AM, "urrent status of luting agents for fixed prosthodontics", J Prosthet Dent, 81, pp.135~141 (1999)
- Tjan AH, "Marginal leakage of cast gold crowns luted with an adhesive resin cement", J Prosthet Dent, 67, pp.11~15 (1992)
- White SN, "Microleakage of new crown and fixed partial denture luting agents", J Prosthet Dent, 67, pp.156~161 (1992)
- Han L, "Evaluation of physical properties and surface degradation of self-adhesive resin cements", Dent Mater J, 26, pp.906~914 (2007)
- Mazzitelli C, "Effect of simulated pulpal pressure on self-adhesive cements bonding to dentin", Dent Mater, 24, pp.1156~1163 (2008)
- Moszner N, "Chemical aspects of selfetching enamel-dentin adhesives: a systematic review", Dent Mater, 21, pp.895~910 (2005)
- De Munck J, "Bonding of an auto-adhesive luting material to enamel and dentin", Dent Mater, 20, pp.963~971 (2004)
- Monticelli F, "Limited decalcification", diffusion of self-adhesive cements into dentin, 2008, pp.87, 974~979
- Behr M, "Marginal adaptation of three self-adhesive resin cements vs. a well-tried adhesive luting agent", Clin Oral Investig, 13, pp.459~464 (2009)
- D'Arcangelo C, "The influence of luting systems on the microtensile bond strength of dentin to indirect resin-based composite and ceramic restorations", Oper Dent, 34, pp.328~336 (2009)
- Mo¨rmann W, "Effect of two self-adhesive cements on marginal adaptation and strength of esthetic ceramic CAD", CAM molar crowns, 2009, pp.18, 403~410
- Sarr M, "Immediate bonding effectiveness of contemporary composite cements to dentin", Clin Oral Investig, 14, pp.569~577 (2010)
- Piwowarczyk A, "Long-term bond between dual-polymerizing cementing agents and human hard dental tissue", Dent Mater, 23, pp.211~217 (2007)
- Lu¨hrs AK, "Shear bond strength of self-adhesive resins compared to resin cements with etch and rinse adhesives to enamel and dentin in vitro", Clin Oral Investig, 14, pp.193~199 (2010)
- Bitter K, "Morphological and bond strength evaluation of different resin cements to root dentin", Eur J Oral Sci, 117, pp.326~333 (2009)
- Hikita K, "Bonding effectiveness of adhesive luting agents to enamel and dentin", Dent Mater, 23, pp.71~80 (2007)
- Flury S, "Push-out bond strength of CAD", CAM-ceramic luted to dentin with self-adhesive resin cements, 2010, pp.26, 855~863
- Radovic I, "Selfadhesive resin cements: a literature review", J Adhes Dent, 10, pp.251~258 (2008)
- Viotti RG, "Microtensile bond strength of new self-adhesive luting agents and conventional multistep systems", J Prosthet Dent, 102, pp.306~312 (2009)
- Brunzel S, "Tensile bond strength of a so-called self-adhesive luting resin cement to dentin", J Adhes Dent, 12, pp.143~150 (2010)
- Holderegger C, "Shear bond strength of resin cements to human dentin", Dent Mater, 24, pp.944~950 (2008)
- Gale MS, "Thermal cycling procedures for laboratory testing of dental restorations", J Dent, 27, pp.89~99 (1999)
- Ernst CF, "Approximal temperature increase and decrease during thermocycling in vivo", J Dent Res, 231, pp.42~ (1997)
- Yap AU, "Comparative hardness and modulus of tooth-colored restoratives: a depth-sensing microindentation study", Biomaterials, 25, pp.2179~2185 (2004)