본문 바로가기
KERD
논문KCI 등재

완전 무치악 환자에서 임시 의치와 치과용 CAD-CAM을 활용한 전악 고정성 임플란트 회복 증례

Complete mouth rehabilitation with fixed implant-supported prosthesis using temporary denture and dental CAD-CAM

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류치의학

초록

임플란트를 이용한 수복 치료에서 장기적인 안정을 얻기 위해서는 임플란트의 식립 시 보철 수복에 이상적인 위치와 각도로 식립하는 것이 중요하다. 이를 위해서는 정확한 치료계획에 따른 수술과 보철 치료가 이루어져야 한다. 본 증례에서는 캐드캠 기술을 이용해 수술 계획 수립, 고정성 임시 보철물 및 최종 보철물 제작을 진행하였다. 최종 보철물을 고려하여 제작한 수술용 가이드로 임플란트를 식립하였다. 임시 의치가 가진 환자의 심미적 정보를 고정성 임시 보철물과 최종 보철물의 제작에 활용하였다. 최종적으로 단일구조 지르코니아를 이용한 전악 임플란트 고정성 보철 수복으로 기능 및 심미적으로 환자가 만족할만한 결과를 얻을 수 있었다.

Abstract

Installation of dental implants at optimal angles and positions is critical in longterm stable implant-supported restorations. Surgery and prosthodontic procedures should be performed accurately as the treatment is planned. In this clinical case, Computer aided design and manufacturing technology was used not only to establish a precise surgical plan, but also to fabricate both provisional and definitive fixed prostheses. A surgical guide was designed to install the implants at proper positions for the definitive prostheses. The patient’s esthetic information, which was necessary for the new provisional and definitive fixed prostheses, was obtained from the existing temporary dentures. Finally, the complete mouth fixed implant-supported rehabilitation using monolithic zirconia provided the patient with functionally and esthetically satisfactory prostheses.

참고문헌 (20)

  1. Misch CE, "Dental implants prosthetics", pp.11~ (2015), Elseiver; Mosby
  2. Harris BT, "Digital imaging and prosthetic-driven implant planning : efficient, accurate, and reliable treatment", Compend Contin Educ Dent, 38, pp.492~494 (2017)
  3. Joda T, "Digital vs. conventional implant prosthetic workflows: a cost", time analysis, 2015, pp.26, 1430~1435
  4. Kapos T, "Computer-aided design and computer-assisted manufacturing in prosthetic implant dentistry", Int J Oral Maxillofac Implants, 24, pp.110~117 (2009)
  5. Jivraj S, "Treatment planning of the edentulous maxilla", Br Dent J, 201, pp.261~279 (2006)
  6. Hassan B, "A digital approach integrating facial scanning in a CAD-CAM workflow for complete-mouth implant-supported rehabilitation of patients with edentulism : A pilot clinical study", J Prosthet Dent, 117, pp.486~492 (2017)
  7. Miyamoto T, "Compliance as a prognostic indicator : retrospective study of 505 patients treated and maintained for 15 years", J Periodontol, 77, pp.223~232 (2006)
  8. Kwon KR, "The prosthetic approach for collapsed vertical dimensions of occlusion", J Dent Rehabil Appl Sci, 20, pp.169~181 (2004)
  9. Zitzmann NU, "Treatment plan for restoring the edentulous maxilla with implant-supported restorations : removable overdenture versus fixed partial denture design", J Prosthet Dent, 82, pp.188~196 (1999)
  10. Lemos CA, "Short dental implants versus standard dental implants placed in the posterior jaws : A systematic review and meta-analysis", J Dent, 47, pp.8~17 (2016)
  11. Annibali S, "Short dental implants : a systematic review", J Dent Res, 91, pp.25~32 (2012)
  12. Korsch M, "Effect of dental cements on peri-implant microbial community : comparison of the microbial communities inhabiting the peri-implant tissue when using different luting cements", Clin Oral Implants Res, 27, pp.e161~e166 (2016)
  13. Kanno T, "A review of the shortened dental arch concept focusing on the work by the Käyser", Nijmegen group, 2006, pp.33, 850~862
  14. Solow RA, "Comprehensive implant restoration and the shortened dental arch", Gen Dent, 58, pp.390~399 (2010)
  15. Lepidi L, "Indirect digital workflow for virtual cross-mounting of fixed implant-supported prostheses to create a 3d virtual patient", J Prosthodont, 30, pp.177~182 (2021)
  16. Schulte W, "Implants and the periodontium", Int Dent J, 45, pp.16~26 (1995)
  17. Kim Y, "Occlusal considerations in implant therapy : clinical guidelines with biomechanical rationale", Clin Oral Implants Res, 16, pp.26~35 (2005)
  18. Zarone F, "Mandibular flexure and stress build-up in mandibular full-arch fixed prostheses supported by osseointegrated implants", Clin Oral Implants Res, 14, pp.103~114 (2003)
  19. Wittneben JG, "Complication and failure rates with implant-supported fixed dental prostheses and single crowns : a 10-year retrospective study", Clin Implant Dent Relat Res, 16, pp.356~364 (2014)
  20. Wittneben JG, "Clinical performance of screw-versus cement-retained fixed implant-supported reconstructions-a systematic review", Int J Oral Maxillofac Implants, 29, pp.84~98 (2014)

관련 논문AI추천

상악 완전 무치악 환자에서 치과용 CAD-CAM을 활용한 완전 고정성 임플란트 수복 증례김성아, 방지원, 이근우, 이용상, 장희원, 차화륜, 홍정은대한치과보철학회 · 대한치과보철학회지2025 · 제63권 제2호디지털 방법을 활용하여 임시수복물을 최종 고정성 임플란트 수복물로 이행한 완전 구강 회복 증례권긍록, 김형섭, 노관태, 배아란, 백장현, 이영후, 조은한, 홍성진대한치과보철학회 · 대한치과보철학회지2022 · 제60권 제4호Dental CAD-CAM system을 통한 고정성 전악 임플란트 수복 증례여인성, 윤형인, 한중석, 홍정민대한치과보철학회 · 대한치과보철학회지2021 · 제59권 제1호임시의치와 디지털 워크플로우를 활용한 전악 임플란트 고정성 보철 수복 증례김경아, 김재윤, 박연희, 서재민, 안승근, 이정진, 조혜민대한치과보철학회 · 대한치과보철학회지2025 · 제63권 제4호최종 보철물에 대한 고려 없이 전악 임플란트 식립된 환자의 고정성 보철 수복 증례권긍록, 김형섭, 배아란, 천영훈대한치과보철학회 · 대한치과보철학회지2017 · 제55권 제4호단일구조 수복용 지르코니아와 Dental CAD/CAM System을 이용한 전악 임플란트 고정성 보철 수복 증례김성훈, 여인성, 윤형인, 이상훈, 한중석대한턱관절교합학회 · 구강회복응용과학지2018 · 제34권 제3호

이 간행물의 다른 논문 (14건)