Comparative Analysis of Body Measurement and Fit Evaluation between 2D Direct Body Measuring and 3D Body Scan Measuring
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
This study purposed to analyze differences in body measurement between the 2D direct body measuring method and the 3D body scan measuring method and to perform the appearance evaluation and cross-sectional evaluation of the fit of pants to which body measurements obtained by each measuring method were applied. Body measuring was conducted in 10 women in their 20s-30s using 2D direct body measuring and 3D automatic measuring with Hamamatsu body scanner. Among the 10 women, 3 participated in experimental garment wearing. Experimental pants were made using their 2D direct body measurements and 3D automatic measurements, and wearing tests were performed through expert evaluation and cross-sectional evaluation. The results of the experiment were as follows. According to the results of comparative analysis on differences between 2D direct body measurements and 3D scan measurements, 3D automatic measurements were significantly larger in bust circumference, ankle circumference, armscye circumference, shoulder length, scye depth, and arm length. As circumferences measured with the 3D body scanner were somewhat larger than directly measured ones, it is suggested to adjust ease when using existing pattern making methods. We prepared experimental garments by the same pattern making method through applying body measurements obtained with the two measuring methods, and assessed the fit of the garment comparatively through expert evaluation and 3D scan cross-sectional evaluation. According to the results, 2D-pants using 2D direct body measurements was slightly tighter than 3D-pants using 3D measurements in waist circumference, hip circumference, and abdominal circumference. In the results of comparing appearance in terms of the fit of the experimental garment in each subject, significant difference was observed in most of the compared items. This result suggests that 3D automatic body measuring data may show different accuracy according to body shape and therefore it is necessary to examine difference between 2D direct body measurements and 3D automatic measurements according to body shape.
Abstract
This study purposed to analyze differences in body measurement between the 2D direct body measuring method and the 3D body scan measuring method and to perform the appearance evaluation and cross-sectional evaluation of the fit of pants to which body measurements obtained by each measuring method were applied. Body measuring was conducted in 10 women in their 20s-30s using 2D direct body measuring and 3D automatic measuring with Hamamatsu body scanner. Among the 10 women, 3 participated in experimental garment wearing. Experimental pants were made using their 2D direct body measurements and 3D automatic measurements, and wearing tests were performed through expert evaluation and cross-sectional evaluation. The results of the experiment were as follows. According to the results of comparative analysis on differences between 2D direct body measurements and 3D scan measurements, 3D automatic measurements were significantly larger in bust circumference, ankle circumference, armscye circumference, shoulder length, scye depth, and arm length. As circumferences measured with the 3D body scanner were somewhat larger than directly measured ones, it is suggested to adjust ease when using existing pattern making methods. We prepared experimental garments by the same pattern making method through applying body measurements obtained with the two measuring methods, and assessed the fit of the garment comparatively through expert evaluation and 3D scan cross-sectional evaluation. According to the results, 2D-pants using 2D direct body measurements was slightly tighter than 3D-pants using 3D measurements in waist circumference, hip circumference, and abdominal circumference. In the results of comparing appearance in terms of the fit of the experimental garment in each subject, significant difference was observed in most of the compared items. This result suggests that 3D automatic body measuring data may show different accuracy according to body shape and therefore it is necessary to examine difference between 2D direct body measurements and 3D automatic measurements according to body shape.
참고문헌 (24)
- Ashdown, Susan P, "Comparison of 3-D Body Scan Data to Quantify upper Body Postural Variation in Older and Younger Women", Clothing and Textiles Research Journal, 26(4) (2008)
- Ashdown, Susan P, "Using 3D Scans for Fit Analysis", Journal of Textile and Apparel, Technology and Management, 4(1) (2004)
- Fang, Jing-Jing, "Expert-based Customized Pattern-making Automation: Part I. Basic Patterns", International Journal of Clothing Science and Technology, 20(1) (2008)
- 한현숙, "3차원 스캔측정치와 직접치수간 차이의 성별 비교-제5차 Size Korea 성인데이터를 대상으로-", 한국의류학회지, 33(8), pp.1190~1202 (2009), 한국의류학회
- Helen, Joseph-Armstrong, "Pattern Making for Fashion Design", pp.2000, Prentice Hall
- Istook, Cynthia, "3D Body Scanning Systems with Application to the Apparel Industry", Journal of Fashion Marketing and Management, 5(2) (2001)
- 정연희, "3차원 인체의 곡률분포를 이용한 패턴 전개", 한국의류학회지, 32(9), pp.1478~1486 (2008), 한국의류학회
- Lim, Ji-Young, "Clothingergonomics Study on the Development of Slacks Pattern and Wearing Evaluation for the Middlehigh School Girls based on Their Lower Body Type", Journal of the Korean Society of Clothing and Textiles, 24(8) (2000)
- Mckinnon, Lashawnda, "Comparative Analysis of the Image Twin System and the 3T6 Body Scanner", Journal of Textile and Apparel Technology and Management, 1(2) (2001)
- 백경자, "3차원 바디스캐너를 이용한 남성 상의 원형의 피트성 평가-직접평가와의 비교-", 한국의류학회지, 33(1), pp.139~148 (2009), 한국의류학회
- Paek, Kyung-Ja, "A Study on the Development of Men's Formal Pants Pattern", Journal of the Korean Society of Clothing and Textiles, 25(8) (2001)
- 백경자, "3차원 바디 스캐너를 이용한 남성 상반신 인체측정-직접측정과의 비교-", 한국의류학회지, 32(1), pp.24~34 (2008), 한국의류학회
- 박정숙, "학령 후기 여아의 하반신 체형 분석에 의한 바지 원형 설계에 관한 연구(제1보)", 한국의류학회지, 27(1), pp.143~153 (2003), 한국의류학회
- Petrova, Adriana, "Three-dimensional Body Scan Data Analysis: Body Size and Shape Dependence of Ease Values for Pants’ Fit", Clothing and Textiles Research Journal, 26(3) (2008)
- Robinette, Kathleen M, "Precision of the CAESAR Scan-extracted Measurements", Applied Ergonomics, 37(3) (2006)
- Simmons, Karla P, "Body Measurement Techniques: Comparing 3D Bodyscanning and Anthropometric Methods for Apparel Applications", Journal of Fashion Marketing and Management, 7(3) (2003)
- Simmons, Karla P, "Female Figure Identification Technique (FFIT) for Apparel - Part I: Describing Female Shapes", Journal of Textile and Apparel, Technology and Management, 4(1) (2004)
- Suh, Chu-Yeon, "A Study on the Evaluation of Ready-made Jacket for Women according to Pattern Size using 3D Scanner", Journal of the Korean Society of Clothing and Textiles, 26(3) (2002)
- 서 동 애†, "3차원 인체 스캔 데이터를 활용한 남성용 바디스 원형 설계 방법 연구", 복식문화연구, 12(2), pp.290~299 (2004), 복식문화학회
- Witana, Channa P, "Foot Measurements from Three-dimensional Scans: A Comparison and Evaluation of Different Methods", International Journal of Industrial Ergonomics, 36(9) (2006)
- 윤미경, "3차원 인체 형상을 이용한 20대 여성의 하반신 전개패턴에 관한 연구", 한국의류학회지, 31(5), pp.692~704 (2007), 한국의류학회
- Yunchu, Yang, "Prototype Garment Pattern Flattening based on Individual 3D Virtual Dummy", International Journal of Clothing Science and Technology, 19(5) (2007)
- Zhang, Bing, "Using Artificial Neural Networks for Human Body Posture Prediction", International Journal of Industrial Ergonomics, 40(4) (2010)
- Zheng, Rong, "Development of a New Chinese Bra Sizing System based on Breast Anthropometric Measurements", International Journal of Industrial Ergonomics, 37 (2007)