CLO 3D 아바타 사이징과 실제인체간의 치수 및 형태 차이 비교 분석
A Comparative Analysis of the Different between CLO 3D Avatar Sizing and Actual Body Measurement Shapes
1
조회
0
다운로드
27
인용
0
참고문헌
키워드
초록
This study aims to use the avatar sizing system of the 3D apparel CAD program instead of the existing 3D body scanners, and to commercialize 3D personal avatars. Towards these ends, the study examined a difference between a 3D avatar and actual body was determined to verify the 3D avatar sizing system. For the experiment, three subjects were selected, were measured as they were, and were made to undergo 3D body scanning and photographing. Then, using avatar sizing system on the 3D apparel CAD program, three types of virtual bodies, namely 3D avatars. The 3D avatar and actual body measurements were compared, and 3D avatars and 3D body-scanned shapes were likewise compared. As a result, the three types of actual bodies and their 3D avatars that were created based on the sizing system of the 3D apparel CAD program were overall similar. but, the thin body-YY type and the normal body-A type were different from their avatars. In the case of type B, who had a bulging abdomen, the 3D avatar was bigger than the actual body as measured. Also, in all body shapes, the girths around the chest, waist and abdomen were produced with exaggerated muscular amounts compared to their actual muscular amounts.
Abstract
This study aims to use the avatar sizing system of the 3D apparel CAD program instead of the existing 3D body scanners, and to commercialize 3D personal avatars. Towards these ends, the study examined a difference between a 3D avatar and actual body was determined to verify the 3D avatar sizing system. For the experiment, three subjects were selected, were measured as they were, and were made to undergo 3D body scanning and photographing. Then, using avatar sizing system on the 3D apparel CAD program, three types of virtual bodies, namely 3D avatars. The 3D avatar and actual body measurements were compared, and 3D avatars and 3D body-scanned shapes were likewise compared. As a result, the three types of actual bodies and their 3D avatars that were created based on the sizing system of the 3D apparel CAD program were overall similar. but, the thin body-YY type and the normal body-A type were different from their avatars. In the case of type B, who had a bulging abdomen, the 3D avatar was bigger than the actual body as measured. Also, in all body shapes, the girths around the chest, waist and abdomen were produced with exaggerated muscular amounts compared to their actual muscular amounts.
참고문헌 (16)
- 이민정, "3D 어패럴 CAD 시스템의 아바타 사이징 비교분석 Ⅱ)", 한국패션비즈니스학회 춘계학술대회, pp.57~ (2012)
- Lee, W. S, "Virtual Body Morphing", Proceeding of 14th Annul. Computer Animation Conference, pp.158~166 (2001)
- Magnenat-Thalmann N, "Automatic Modeling of Virtual Humans and Body Clothing", Journal of Computer Science and Technology, 19(5), pp.575~584 (2004)
- Nagnenat-Thalmann N, "Modeling and Simulating Bodies and Garments", pp.1~159 (2010), Springer-Verlag
- 여영인, "이미지 입력을 이용한 3차원 아바타의 데이터기반 생성 기법", 한국컴퓨터종합학술대회, 32(1A), pp.682~684 (2005)
- 김기현, "맞춤양복 제작을 위한 인체치수 측정 시스템 개발", 한국콘텐츠학회 종합학술대회, 5(1), pp.16~20 (2007)
- 임지영, "중년여성의 상반신 비만유형 분석 및 3D 가상모델 제작", 자연과학, 21(1), pp.67~81 (2010)
- 이민정, "Analysis of 3D Body Sizing in 3D Apparel CAD System", 2011 International Textiles and Costume Congress, pp.230~231 (2011), 복식문화학회, The ITB(Indonesia), CCA(Korea), Ars Textrina(UK)
- 임호선, "Comparative Assessment of Virtual Garments using Direct and Manual Avatars", 복식문화연구, 19(6), pp.1359~1371 (2011), 복식문화학회
- 이민정, "남성정장 MTM 시스템 구현을 위한 3D 아바타 사이징과 가상 피팅 기술 연구", 박사, pp.2012
- 박창규, "의류 패션산업에서의 3차원 및 디지털 응용기술의 현황", 패션정보와 기술, 1(1), pp.99~100 (2004)
- 박창규, "건국대학교 i-Fashion의류기술센터", 한국의류산업학회지, 10(7), pp.407~ (2008)
- 제6차 한국인 인체치수 3차원형상측정 조사사업 최 종보고서 및 부록, "산업자원부 기술표준원", 1~204 (2010)
- "제6차 한국인 인체치수조사" (2011)[URL]
- "CLO 3D v.3.22" (2011)[URL]
- "i-Fashion" (2010)[URL]