본문 바로가기
KERD
논문KCI 등재

소방공무원의 방화두건 제작을 위한 머리 치수 연구

Anthropometric study of the head for the development of firefighting hoods for firefighters

4

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류생활과학

초록

Firefighting hoods protect the head, face, and neck areas of officials while they perform firefighting services. The purpose of this study is to investigate the head size of Korean firefighting officials in order to establish the dimensions necessary to construct firefighting hoods. A total of 98 male firefighting officials participated in this study and 11 body dimensions, necessary for the construction of firefighting hoods, were measured. The data collected from the firefighting officials were compared to the general adult male data from the Size Korea national anthropometric study. The heights, weights, head circumferences, head heights, and bitragion arcs of the firefighters were significantly larger than those of general adult males, which shows that firefighting officials generally have larger body and head sizes than general adult males. Based on the results of Pearson's correlation coefficients, head circumference and head height were judged to be the important measurements for the construction of the firefighting hoods. Thus, these two measurements were chosen as the basic dimensions of the cross tabulation analysis. As a result, head circumferences of 57.00~60.99cm and head heights of 23.00~25.99 cm were found to be important measurement ranges among the firefighters. This study is expected to be used as the basis for the creation of firefighting hoods that help to ensure the safe rescue activities for firefighting officials.

Abstract

Firefighting hoods protect the head, face, and neck areas of officials while they perform firefighting services. The purpose of this study is to investigate the head size of Korean firefighting officials in order to establish the dimensions necessary to construct firefighting hoods. A total of 98 male firefighting officials participated in this study and 11 body dimensions, necessary for the construction of firefighting hoods, were measured. The data collected from the firefighting officials were compared to the general adult male data from the Size Korea national anthropometric study. The heights, weights, head circumferences, head heights, and bitragion arcs of the firefighters were significantly larger than those of general adult males, which shows that firefighting officials generally have larger body and head sizes than general adult males. Based on the results of Pearson's correlation coefficients, head circumference and head height were judged to be the important measurements for the construction of the firefighting hoods. Thus, these two measurements were chosen as the basic dimensions of the cross tabulation analysis. As a result, head circumferences of 57.00~60.99cm and head heights of 23.00~25.99 cm were found to be important measurement ranges among the firefighters. This study is expected to be used as the basis for the creation of firefighting hoods that help to ensure the safe rescue activities for firefighting officials.

참고문헌 (20)

  1. 안영실, "모자 제작을 위한 여자 머리 형태에 관한 연구- 유형별 머리모형 개발을 중심으로 -", 복식문화연구, 12(6), pp.125~134 (2004), 복식문화학회
  2. An, K. H., "A study on analysis of job-related physical and mental symptoms, post traumatic stress of firefighters", master, pp.2015
  3. "Compatible PPE/helmets/hoods"[URL]
  4. 최영림, "성인 남성 머리와 얼굴 부위의 형태분류와 3차원적 분석", 한국의류산업학회지, 12(6), pp.812~820 (2010), 한국의류산업학회
  5. Han, S. -A., "The development of the sizing system for structural firefighting protective clothing and new coat patterns using 3D motion analysis", doctor, pp.2009
  6. 한설아, "한국 소방용 방화복에 대한 만족도 조사", 복식, 58(9), pp.166~175 (2008), 한국복식학회
  7. 한설아, "한국 소방용 방화복의 치수체계 개발", 한국의류학회지, 33(5), pp.827~839 (2009), 한국의류학회
  8. 김혜수, "한국 성인의 3차원 두형개발을 위한 머리치수 연구", Family and Environment Research, 43(6), pp.13~25 (2005), 대한가정학회
  9. "Sizing systems for hat (Standard NO. KS K 0059)" (2009)[URL]
  10. (2014)[URL]
  11. (2011)[URL]
  12. 이진희, "두건류 제작을 위한 남성의 두부 형태 분석", 한국의류학회지, 28(1), pp.182~188 (2004), 한국의류학회
  13. 이진희, "모자업체의 유형별 치수체계에 관한 연구", 한국생활과학회지, 12(4), pp.571~578 (2003), 한국생활과학회
  14. (2001)[URL]
  15. (2015)[URL]
  16. "Fire statistics status"[URL]
  17. D J Prezant, "Thermal protective uniforms and hoods: impact of design modifications and water content on burn prevention in New York City firefighters: laboratory and field results", Injury Prevention, 7(90001), pp.43i~49 (2001), BMJ[DOI]
  18. (2010)[URL]
  19. 손희순, "후드(Hood) 패턴 설계를 위한 체형연구 -머리 및 어깨의 형태를 중심으로-", 한국의상디자인학회지, 13(1), pp.37~46 (2011), 한국의상디자인학회
  20. 송영웅, "한국인 안면부 인체 데이터를 이용한 마스크 계면 프로토타입 설계", 대한안전경영과학회지, 12(4), pp.87~92 (2010), 대한안전경영과학회

관련 논문AI추천

이 간행물의 다른 논문 (11건)