3D 체표면 분할 전개방법에 의한 성인 남성 밀착원형 설계
Development of tight-fit patterns for adult males according to the 3D body surface segment method
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study is based on a representative body shape drawn from previous studies that classify adult male torso shapes. In this study, a design method is proposed by developing a tight-fit pattern that can be easily developed into various items and designs using the body surface development figure. This is obtained by converting the 3D body shape of the model representing the representative body shape. The specific design method was conducted as follows. Actual measurement values were used for waist back length, waist-to-hip length, shoulder length. The scye depth was determined as C/4–1.7 cm, and the front and back Interscye was set at (1/2 × actual measurements)–0.2 cm. The front-back neck breadth was set to (1/5 × base neck circumference)–1.3 cm and (1/5 × base neck circumference) cm. The front-back neck depth was set to (1/5 × base neck circumference)–1.2 cm and 3.5 cm. Front chest circumference was C/4–1 (front-back difference)cm; (1/4 × back chest circumference) was C/4 + 1 (front-back difference) + 0.3 (dart amount) cm. Front waist circumference was W/4–0.2 (front-back difference) + 2.2 (dart amount) cm; back waist circumference was W/4 + 0.2 (front-back difference) + 2.5 (dartamount) cm; front hip circumference was H/4 + 0.2 (ease) + 0.2 (front-back difference) cm; and back hip circumference was H/4 + 0.2 (ease)–0.2 (front-back difference) cm; Front droop was 1.6 cm. The newly developed tight-fit pattern is expected to be of great use as a basis for garment construction.
Abstract
This study is based on a representative body shape drawn from previous studies that classify adult male torso shapes. In this study, a design method is proposed by developing a tight-fit pattern that can be easily developed into various items and designs using the body surface development figure. This is obtained by converting the 3D body shape of the model representing the representative body shape. The specific design method was conducted as follows. Actual measurement values were used for waist back length, waist-to-hip length, shoulder length. The scye depth was determined as C/4–1.7 cm, and the front and back Interscye was set at (1/2 × actual measurements)–0.2 cm. The front-back neck breadth was set to (1/5 × base neck circumference)–1.3 cm and (1/5 × base neck circumference) cm. The front-back neck depth was set to (1/5 × base neck circumference)–1.2 cm and 3.5 cm. Front chest circumference was C/4–1 (front-back difference)cm; (1/4 × back chest circumference) was C/4 + 1 (front-back difference) + 0.3 (dart amount) cm. Front waist circumference was W/4–0.2 (front-back difference) + 2.2 (dart amount) cm; back waist circumference was W/4 + 0.2 (front-back difference) + 2.5 (dartamount) cm; front hip circumference was H/4 + 0.2 (ease) + 0.2 (front-back difference) cm; and back hip circumference was H/4 + 0.2 (ease)–0.2 (front-back difference) cm; Front droop was 1.6 cm. The newly developed tight-fit pattern is expected to be of great use as a basis for garment construction.
참고문헌 (14)
- 최경미, "3차원 인체형상자료를 이용한 겨드랑둘레선의 형태특성 및 유형", 한국의류산업학회지, 12(1), pp.80~85 (2010), 한국의류산업학회
- Choi, M. H., "Classification of mens shoulder types and flattening 2D pattern using 3D scan data", Doctor, pp.2007
- 최영림, "Grid method에 의한 3차원 형상의 평면전개를 위한 optimal matrix 표준화 연구-18~24세 여성 Upper Front Shell을 중심으로-", 한국의류학회지, 30(8), pp.1242~1252 (2006), 한국의류학회
- Garland, M., "Quadric-based polygonal surface simplification", Doctor, pp.1999
- 홍은희, "3D 스캔 데이터에 의한 성인 남성의 체간부 형태 유형화", 한국의상디자인학회지, 21(4), pp.165~179 (2019), 한국의상디자인학회[DOI]
- 정연희, "Triangle Simplification에 의한 3D 인체형상분할과 삼각조합방법에 의한 2D 패턴구성", 한국의류학회지, 29(9,10), pp.1359~1368 (2005), 한국의류학회
- Kim, H. S., "Study on body shapes using 3D measurement and torso pattern of obese women", Doctor, pp.2007
- Kim, H. S., "A study on comparative analysis of outdoor slacks pattern with the use of 3D body shape", master, pp.2014
- 김경선, "의복제작을 위한 3차원 인체형상각도의 자동측정 연구", 기초조형학연구, 17(5), pp.73~82 (2016), 한국기초조형학회
- "The fifth Korean national physical standard reports" (2004)[URL]
- 이희란, "3D 레플리카를 이용한 여성용 밀착 상의의 패턴 전개 방법", 한국의류학회지, 29(7), pp.1008~1017 (2005), 한국의류학회
- "신년 사업 계획-남성복…뚜렷해진 소비패턴 변화 상품․유통 대응전략 가동" (2020)[URL]
- Lee, S. J., "Study on the 3-D human body shape and size for pattern making", Doctor, pp.2009
- Suh, D. A., "A study of development men’s jacket pattern based on 3-D laser scan data", Doctor, pp.2001