CAD-CAM 맞춤 지대주 제작 시 고려사항: I. 환봉선택 및 제작과정을 중심으로
Considerations for Fabrication of CAD-CAM Abutments: Part I. Selection of Titanium Block and Fabrication Process
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Custom abutment fabrication using computer aided design–computer aided manufacturing (CADCAM) technology is an efficient method that can be used to overcome complications associated with tilted implant installation and esthetics. This technology is becoming increasingly popular due to its convenience. However, CAD-CAM abutments are often misused because many clinicians did not consider the various factors involved in their use. Herein, we investigate the factors that must be considered during the fabrication of CAD-CAM abutments, problems using compatible abutments.
Abstract
Custom abutment fabrication using computer aided design–computer aided manufacturing (CADCAM) technology is an efficient method that can be used to overcome complications associated with tilted implant installation and esthetics. This technology is becoming increasingly popular due to its convenience. However, CAD-CAM abutments are often misused because many clinicians did not consider the various factors involved in their use. Herein, we investigate the factors that must be considered during the fabrication of CAD-CAM abutments, problems using compatible abutments.
참고문헌 (16)
- Marlin GM, "Restoring the single lower incisor implant with esthetics, antirotation, and retrievability", Compendium, 15, pp.624~ (1994)
- Marchack CB, "A custom titanium abutment for the anterior single-tooth implant", J Prosthet Dent, 76, pp.288~291 (1996)
- de Avila ED, "Correction of malpositioned implants through periodontal surgery and prosthetic rehabilitation using angled abutment", Case Rep Dent, 2014, pp.702~630 (2014)
- Linkevicius T, "Influence of abutment material on stability of peri-implant tissues: a systematic review", Int J Oral Maxillofac Implants, 23, pp.449~456 (2008)
- Welander M, "The mucosal barrier at implant abutments of different materials", Clin Oral Implants Res, 19, pp.635~641 (2008)
- 이진선, "원추형 연결 임플란트에서 지대주 종류에 따른 나사풀림과 침하현상에 관한 연구", 대한치과보철학회지, 50(2), pp.92~98 (2012), 대한치과보철학회[DOI]
- Lee JH, "Axial displacements in external and internal implant-abutment connection", Clin Oral Implants Res, 25, pp.e83~e89 (2014)
- Huh YH, "Axial displacement in cement-retained prostheses with different implant-abutment connections", Int J Oral Maxillofac Implants, 28(Suppl.14) (2017)
- Peter Gehrke, "Microscopical and chemical surface characterization of CAD", CAM zircona abutments after different cleaning procedures. A qualitative analysis, 2015, pp.7(2), 151~159[DOI]
- Canullo L, "Microscopical and microbiologic characterization of customized titanium abutments", Clin Oral Implants Res, 25, pp.328~336 (2014)
- Lee JH, "Effect of the coronal wall thickness of dental Implants on the screw joint stability in the internal Implant-abutment connection", Int J Oral Maxillofac Implants, 31, pp.1058~1065 (2016)
- Ji-Hye Lee, "Impact of Intentional Overload on Joint Stability of Internal Implant-Abutment Connection System with Different Diameter", Journal of Prosthodontics, 28(2), pp.e649~e656 (2019), Wiley[DOI]
- Cho SY, "Three-dimensional finite element analysis of the stress distribution at the internal Implant-abutment connection", Int J Periodontics Restorative Dent, 36, pp.e49~e58 (2016)
- Choi HS, "The study for abutmet- compatibility of implant systems", J Dental Impl Res, 2, pp.53~62 (2008)
- 김종욱, "기성 지대주와 맞춤형 CAD-CAM 지대주의 적합 및 나사 안정성 비교", 대한치과보철학회지, 51(4), pp.276~283 (2013), 대한치과보철학회[DOI]
- Cochran DL, "Bone response to loaded implants with non-matching implant-abutment diameters in the canine mandible", J Periodontol, 80, pp.609~617 (2009)