The mechanical properties of 3D printed denture base resin incorporating essential oil microcapsules
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose. The aim of this study was to investigate the mechanical properties of three-dimensional (3D) printed denture base resin incorporating microcapsules containing plant essential oils. Materials and Methods. Denture base specimens containing up to 3% w/v essential oil microcapsule powders (MCPs), i.e., eucalyptus, geranium, lavender, menthol, and tea tree, in two resins (Detax and NextDent 3D+) were 3D printed using two printers (Asiga and NextDent 5100). The dispersion and interaction of the MCPs in the resin were assessed by SEM while the mechanical properties of the incorporated denture base including flexural strength (MPa), flexural modulus (MPa), Vickers hardness (VHN), and surface roughness (Ra) were also subsequently evaluated. Statistical analysis of any differences in mean values was determined using a two-way ANOVA with Tukey’s post hoc testing (α = .05). Results. The spherical shape of the MCPs was maintained during the mixing and polymerization/printing process. However, the Detax-Asiga group showed significant agglomeration of the MCPs even at the lowest MCP concentration levels (0.5% w/v). Overall, as the microcapsule concentration increased, the mean flexural strength decreased, though the menthol MCP groups remained compliant with the ISO standard. The flexural modulus and harness remained relatively unchanged, and the flexural modulus complied with the ISO standard regardless of the MCP concentration. Surface roughness increased with the addition of the MCPs but also remained below that required for clinical acceptance. Conclusion. Incorporation of microencapsulated plant essential oils into 3D printed denture base resin was successfully achieved. While incorporation negatively influenced flexural strength and surface roughness, little effect on flexural modulus and Vickers hardness was demonstrated.
Abstract
Purpose. The aim of this study was to investigate the mechanical properties of three-dimensional (3D) printed denture base resin incorporating microcapsules containing plant essential oils. Materials and Methods. Denture base specimens containing up to 3% w/v essential oil microcapsule powders (MCPs), i.e., eucalyptus, geranium, lavender, menthol, and tea tree, in two resins (Detax and NextDent 3D+) were 3D printed using two printers (Asiga and NextDent 5100). The dispersion and interaction of the MCPs in the resin were assessed by SEM while the mechanical properties of the incorporated denture base including flexural strength (MPa), flexural modulus (MPa), Vickers hardness (VHN), and surface roughness (Ra) were also subsequently evaluated. Statistical analysis of any differences in mean values was determined using a two-way ANOVA with Tukey’s post hoc testing (α = .05). Results. The spherical shape of the MCPs was maintained during the mixing and polymerization/printing process. However, the Detax-Asiga group showed significant agglomeration of the MCPs even at the lowest MCP concentration levels (0.5% w/v). Overall, as the microcapsule concentration increased, the mean flexural strength decreased, though the menthol MCP groups remained compliant with the ISO standard. The flexural modulus and harness remained relatively unchanged, and the flexural modulus complied with the ISO standard regardless of the MCP concentration. Surface roughness increased with the addition of the MCPs but also remained below that required for clinical acceptance. Conclusion. Incorporation of microencapsulated plant essential oils into 3D printed denture base resin was successfully achieved. While incorporation negatively influenced flexural strength and surface roughness, little effect on flexural modulus and Vickers hardness was demonstrated.
참고문헌 (27)
- Bilgin MS, "A review of computer-aided design", computer-aided manufacture techniques for removable denture fabrication, 2016, pp.10, 286~291
- Stansbury JW, "3D printing with polymers : Challenges among expanding options and opportunities", Dent Mater, 32, pp.54~64 (2016)
- Yue J, "3D-printable antimicrobial composite resins", Adv Funct Mater, 25, pp.6756~6767 (2015)
- Bakry AM, "Microencapsulation of oils: A comprehensive review of benefits, techniques, and applications", Compr Rev Food Sci Food Saf, 15, pp.143~182 (2016)
- Alič B, "Microencapsulation of butyl stearate with melamine-formaldehyde resin : Effect of decreasing the pH value on the composition and thermal stability of microcapsules", Express Polym Lett, 6, pp.826~836 (2012)
- Augustin MA, "Microencapsulation of food ingredients", Food Aust, 53, pp.220~223 (2001)
- 류화원, "Preparation and Characterization of Melamine-Formaldehyde Resin Microcapsules Containing Fragrant Oil", Biotechnology and Bioprocess Engineering, 11(4), pp.332~336 (2006), 한국생물공학회
- Yu D, "Preparation and properties of olive oil microcapsules", J Fiber Bioeng Informat, 5, pp.67~76 (2012)
- Ocak B, "Microencapsulation of Melaleuca alternifolia(Tea tree)oil by using simple coacervation method", J Essent Oil Res, 23, pp.58~65 (2011)
- Zhang S, "Microencapsulation of tea tree oil by spray-drying with methyl cellulose as the emulsifier and wall material together with chitosan", alginate, 2017, pp.134, ~
- Soliman E, "Microencapsulation of essential oils within alginate : Formulation and in vitro evaluation of antifungal activity", J Encapsulation Adsorpt Sci, 3, pp.48~55 (2013)
- Gutiérrez TJ, "Advances in physicochemical properties of biopolymers (Part 2)", pp.296~322 (2017), Bentham Science Publishers
- Bruschi ML, "Strategies to modify the drug release from pharmaceutical systems", pp.87~194 (2015), Woodhead Publishing
- An S, "Incorporation of antimicrobial agents in denture base resin : A systematic review", J Prosthet Dent, 126, pp.188~195 (2021)
- An S, "Overview of incorporation of inorganic antimicrobial materials in denture base resin : A scoping review", J Prosthet Dent, S0022-3913(21), pp.00492~00493 (2021)[DOI]
- Totu EE, "Poly(methyl methacrylate)with TiO2nanoparticles inclusion for stereolitographic complete denture manufacturing-the fututre in dental care for elderly edentulous patients?", J Dent, 59, pp.68~77 (2017)
- Nagrath M, "Functionalized prosthetic interfaces using 3D printing : Generating infection-neutralizing prosthesis in dentistry", Mater Today Commun, 15, pp.114~119 (2018)
- Gad MM, "3D-printable denture base resin containing SiO2 nanoparticles : An in vitro analysis of mechanical and surface properties", J Prosthodont, 31, pp.784~790 (2022)
- Hada T, "Effect of different filler contents and printing directions on the mechanical properties for photopolymer resins", Int J Mol Sci, 23, pp.2296~ (2022)
- Oliveira Jde A, "Safety and tolerability of essential oil from Cinnamomum zeylanicum blume leaves with action on oral Candidosis and its effect on the physical properties of the acrylic resin", Evid Based Complement Alternat Med, 2014, pp.325670~ (2014)
- Zhang K, "Effect of antimicrobial denture base resin on multi-species biofilm formation", Int J Mol Sci, 17, pp.1~13 (2016)
- An S, "Incorporation of the microencapsulated antimicrobial agent phytoncide into denture base resin", Aust Dent J, 63, pp.302~311 (2018)
- Jeon S, "Antifungal effect, surface roughness, and cytotoxicity of three-dimensionally printed denture base with phytoncide-filled microcapsules: An in-vitro study", J Dent, 120, pp.104098~ (2022)
- Hada T, "Effect of printing direction on stress distortion of three-dimensional printed dentures using stereolithography technology", J Mech Behav Biomed Mater, 110, pp.103949~ (2020)
- "ISO 20795-1. Dentistry - Base polymers Part 1: Denture base polymers", International Standards Organization (ISO), ~ (2013)
- Al-Dwairi ZN, "A comparison of the surface and mechanical properties of 3D printable denture-base resin material and conventional polymethylmethacrylate(PMMA)", J Prosthodont, 32, pp.40~48 (2023)
- Ali MY, "Comprehensive materials finishing", pp.322~343 (2017), Elsevier