유한요소해석을 이용한 압축 하중을 받는 오픈 홀 복합재 시편의 점진적 손상 및 파손 분석
Progressive Damage and Failure Analysis of Open-Hole Composite Specimens Under Compressive Loading Using Finite Element Analysis
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 논문에서는 압축 하중을 받는 오픈 홀(open-hole compression) 복합재 시편의 평면 내 손상(in-plane damage) 및 층간 분리(delamination)를 예측하기 위한 모델링 방법을 제안하고 유한요소해석(finite element analysis)을 수행하였다. 유한요소모델은 오픈 홀 복합재 시편의 점진적 손상 및 파손 분석(progressive damage and failure analysis)을 위해 Hashin 파손 기준(hashin failure criteria)과 표면 기반 응집 거동(cohesive behavior) 모델을 기반으로 구성되었으며 ABAQUS/EXPLICIT Solver를 활용하여 해석을 수행하였다. 유한요소해석의 타당성을 종합적으로 평가하기 위해 세 가지 유형의 적층 패턴(stacking sequences)을 가지는 오픈 홀 압축 복합재 시편에 대한 시험 결과와 비교하였다. 오픈 홀 압축 시편의 강도와 강성은 백분율 오차(percentage error) 10.0 % 미만으로 비교적 잘 예측하였으며 오픈 홀 복합재 적층판의 인장/압축 매트릭스 손상 상태 및 원공(hole) 근처의 복합재 계면 층간 분리에 대한 손상 상태를 추출하여 평가하고 분석하였다.
Abstract
In this paper, a Progressive Damage and Failure Analysis (PDFA) modeling method was developed using ABAQUS/EXPLICIT to predict in-plane damage and delamination for Open-Hole Compression (OHC) testing. The proposed PDFA model was constructed based on Hashin criteria and cohesive behavior. The strength and stiffness of OHC specimens with three types of stacking sequences [(45/-45/0₂)₃]s, [(45/0/-45/90)₃]s and [45/-45/0/45/-45/90/(45/-45)₂]s were compared to comprehensively evaluate the validity of the Finite Element(FE) model of PDFA. The strength and stiffness of the OHC specimens were predicted relatively well, with less than a percentage error 10.0 %. For the numerical simulation case for each layup, the damage initiation/evolution of OHC specimens were evaluated for delamination and tension/compression matrix damage before and after failure.
참고문헌 (17)
- Davies, C., "CMH-17, Vol. 3 Polymer Matrix Composites Materials Usage" (2012), SAE International
- Spendley, Paul R., "Design Allowables for Composite Aerospace Structures", PhD, pp.2012
- Cumbo, R., "Design Allowables of Composite Laminates : A Review", Journal of Composite Materials, 56(23), pp.3617~3634 (2022)
- Icardi, U., "Assessment of Recent Theories for Predicting Failure of Composite Laminates", Applied Mechanics Reviews, 60, pp.76~86 (2007)
- Liu, P. F., "Recent Developments on Damage Modeling and Finite Element Analysis for Composite Laminates : A Review", Materials & Design, 31(8), pp.3825~3834 (2010)
- Whitney, J. M., "Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations", Journal of Composite Materials, 8(3), pp.253~265 (2010)
- 이흔주, "원공을 가지는 복합재 적층판의 인장강도 예측 기법", Composites Research, 24(4), pp.29~35 (2011), 한국복합재료학회
- Soutis, C., "Failure Prediction Technique for Compression Loaded Carbon Fibre-epoxy Laminate with Open Holes", Journal of Composite Materials, 25(11), pp.1476~1498 (1991)
- Chang, F. K., "Damage Tolerance of Laminated Composites Containing an Open Hole and Subjected to Compressive Loadings : Part I—Analysis", Journal of Composite Materials, 25(1), pp.2~43 (1991)
- Hashin, Z., "A Fatigue Failure Criterion for Fiber Reinforced Materials", Journal of Composite Materials, 7(4), pp.448~464 (1973)
- Hashin, Z., "Fatigue Failure Criteria for Unidirectional Fiber Composites", Journal of Applied Mechanics, 47(2), pp.329~334 (1980)
- Benzeggagh, M. L., "Measurement of Mixed-mode Delamination Fracture Toughness of Unidirectional Glass", epoxy Composites with Mixed-mode Bending Apparatus, 1996, pp.56(4), 439~449
- "ASTM D6484", D6484M-20, Standard Test for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates, 2020
- Wisnom, M., "Scaling Effects in Notched Composites", Journal of Composite Materials, 44(2), pp.195~210 (2010)
- Pinho, S., "Material and Structural Response of Polymermatrix Fibre-reinforced Composites", Journal of Composite Materials, 46(19-20), pp.2313~2341 (2012)
- Wanthal, S., "Verification and Validation Process for Progressive Damage and Failure Analysis Methods in the NASA Advanced Composites Consortium", Proceedings of the American Society for Composites (ASC) Technical Conference (2017)
- Analysis of Open Hole Compression Specimens Using the CompDam Continuum Damage Mechanics Model, "Bergan, A. C.", ~, pp.NASA (2020), TM–20205009618