압출성형기를 이용한 나노복합재 필름의 특성 분석
Characteristics Analysis of Nano-composites Films Using Extruder
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Polypropylene(PP)/multiwalled carbon nanotubes(MWCNT) nanocomposites films and PP/poly(vinyl alcohol)/CNT nanocomposites films were prepared through melt mixing method by the extruder. The PP/CNT nanocomposites films, which contain CNT of a variable content, were prepared for the first time and research on a appropriate content of the CNT on the PP/CNT nanocomposites films was conducted. The effects of take-up speed of the extruder on the mechanical and chemical properties of the PP/CNT and PP/PVA/CNT nanocomposties film were studied. Field emission scanning electron microscope( FE-SEM) was used to examine the surface morphology and the DSC measurement and tensile test were conducted. It was found that the properties decreased when takeup speed was increased.
Abstract
Polypropylene(PP)/multiwalled carbon nanotubes(MWCNT) nanocomposites films and PP/poly(vinyl alcohol)/CNT nanocomposites films were prepared through melt mixing method by the extruder. The PP/CNT nanocomposites films, which contain CNT of a variable content, were prepared for the first time and research on a appropriate content of the CNT on the PP/CNT nanocomposites films was conducted. The effects of take-up speed of the extruder on the mechanical and chemical properties of the PP/CNT and PP/PVA/CNT nanocomposties film were studied. Field emission scanning electron microscope( FE-SEM) was used to examine the surface morphology and the DSC measurement and tensile test were conducted. It was found that the properties decreased when takeup speed was increased.
참고문헌 (26)
- M. Bouslah, "Effect of Microsphere Content on Fire Performance and Thermomechanical Properties Phenolic Resole Syntactic Foam Composites", ICCM 19th International Conference on Composite Materials, pp.4531~4542 (2013)
- 구가영, "미세-작동기를 위한 전기방사 CNT", PVDF 나노섬유 기반의 탄소 복합재의 기계적및 전기적 특성 평가, 2013, pp.26(1), 14~20[DOI]
- 엄호경, "전처리와 분산제가 CNT-permalloy 복합전기도금에 미치는 영향 연구", 마이크로전자 및 패키징학회지, 17(1), pp.63~68 (2010), 한국마이크로전자및패키징학회
- X. Liang, "Carbon Nanotube Field-Effect Transistors : Towards Entire-Carbon-Nanotube Circuits : The Fabrication of Single-Walled-Carbon-Nanotube Field-Effect Transistors with LocalMultiwalled-Carbon-Nanotube Interconnects", Advanced Materials, 21, pp.4~ (2009)
- M. T. Ahamdi, "Carbon Nanotube Band Structure Effect on Carbon Nanotube Field Effect Transistor", Aip Conference Proceedings Series, Playa del Carmen, pp.254~259 (2010)
- Y. H. Lee, "Carbon Nanotube Buckypapers as Electrocatalysts Upport forMethanol Oxidation", Carbon, 1, pp.675~ (2012)
- M. Mohammad, "Polymer NanocompositesContainingCarbonNanotubes", Macromolecules, 39, pp.5194~ (2006)
- 김호겸, "UV 경화형 우레탄 아크릴레이트", MMT 나노 복합체의 열 안정성에 대한 혼합형 희석제의 조성 효과, 2016, pp.40(1), 9~16[DOI]
- B. Gong, "Synthesis and Properties of a Millable Polyurethane Nanocomposite based on Castor Oil and Halloysite Nanotubes", RSC Advances, 6, pp.12084~ (2016)
- Z. Wang, "Solution-processed Poly (3,4-ethylenedioxythiophene) Nanocomposite Paper Electrodes for High-capacitance Flexible Supercapacitors", J. of Materials Chemistry A, 4, pp.1714~ (2016)
- E. Giannelis, "Polymer Layerd SilicateNanocomposites", Adv. Mater, 8, pp.29~ (1996)
- T. Agag, "Studies on Thermal andMechanical Properties of Polyimide-clayNanocomposites", Polymer, 42, pp.3399~ (2001)
- C. J. Kleverlaan, "Polymerization Shrinkage andContraction Stress ofDentalResinComposites", DentalMaterials, 21, pp.1150~ (2005)
- D. J. Barron, "A Comparison of Monomer Conversion and Inorganic Filler Content in Visible Light-cured Denture Resins", DentalMaterials, 8, pp.274~ (1992)
- J. G. Ryu, "Polymer Nanocomposites based on Amorphous Copolyster and Organo-inorganic Nanofillers: A Structure and Property Study", Polymer, 22, pp.328~ (1999)
- M. Alexandre, "Polymer-layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials", Materials Science and Engineering R: Reports, 28, pp.1~ (2000)
- C. A. Finish, "Poly(vinylalcohol)" (1992), Wiley
- C. M. Hassan, "Cellular PVA Hydrogels Produced by Freeze", thawing, 2000, pp.76, 2075~
- G. M. Kavanagh, "Rheological Characterisation of Polymer Gels", Progress in Polymer Science, 23, pp.533~ (1998)
- E. E. Shafee, "Water Sorption in Crosslinked Poly(vinyl alcohol)Networks", Polymer, 44, pp.1647~ (2003)
- S. V. Caro, "Reaction of Hexamethylene Diisocyanate with Poly(vinyl alcohol)Films for Biomedical Applications", Applied Polymer, 20, pp.3241~ (1976)
- H. Omidian, "Polyvinyl Alcohol in Medicine and Pharmacy;A Perspective", Developing Drugs, 2, pp.112~ (2013)
- H. G. Tian, "Dynamic Mechanical Property and Photochemical Stability of Perlite", PVAand OMMT, J. of Materials Science, pp.2007, 43[DOI]
- Y. T. Saito, "Kinetics of Property Change associated with Atmospheric Humidity Changes in Alumina Powder Granules with PVA Binder", J. of the European Ceramic Society, 22, pp.2835~ (2002)
- 양성백, "전기방사를 이용한 Poly(vinyl alcohol)", Pullulan, 한국염색가공학회지, pp.2014, 26(3)[DOI]
- 이민경, "카본나노튜브를 이용한 고성능 나노복합재료의 개발 동향", 한국염색가공학회지, 26(2), pp.71~78 (2014), 한국염색가공학회