철근 밴딩기 내 기어시스템의 구조적인 역학특성
Structural Analysis of Gear System in An Iron Bar Bending Machine
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Structural characteristics have been analyzed for gear system in a commercial iron bending machine which is widely used at many building construction sites. This complicated gear system in the bending machine is fundamental power transfer unit from electrical motors, and it is composed of various configuration structure including various spur and helical gear assembly. Main structural characteristics of the gear system such as stress and deformation distributions are predicted with numerical simulation of FEM method for various operating conditions of torque and rotation speed. Results show that there is large deformation in lower region of driving gear, and high stress near those contact area which is greatly affected by motor torque. These results can be applied for the design improvement of efficient gear system in the iron bar bending machine.
Abstract
Structural characteristics have been analyzed for gear system in a commercial iron bending machine which is widely used at many building construction sites. This complicated gear system in the bending machine is fundamental power transfer unit from electrical motors, and it is composed of various configuration structure including various spur and helical gear assembly. Main structural characteristics of the gear system such as stress and deformation distributions are predicted with numerical simulation of FEM method for various operating conditions of torque and rotation speed. Results show that there is large deformation in lower region of driving gear, and high stress near those contact area which is greatly affected by motor torque. These results can be applied for the design improvement of efficient gear system in the iron bar bending machine.
참고문헌 (8)
- Son, Y. S., "A Study on the Optimism Design of the Gear Tooth Profile", 2007 Spring Conference Proceeding, The Korean Society of Mechanical Engineers, pp.2711~2716 (2007)
- 조재웅, "차동 기어 장치에 관한 구조 해석", 한국생산제조학회지, 16(3), pp.279~284 (2009), 한국생산제조학회
- Chung, M. J., "Design of Portable Small Motorized Bending Machine using Structural Analysis Method", KSME, 20, pp.3126~3127 (2018), The Korean Society of Mechanical Engineers
- 신유정, "철근 밴딩기 롤러의 피로파괴 CAE 해석", 한국기계가공학회지, 14(2), pp.75~80 (2015), 한국기계가공학회[DOI]
- 김갑태, "저소음 기어펌프용 연속접촉 헬리컬기어의 형상 설계에 관한 연구", 동력시스템공학회지, 22(6), pp.58~66 (2018), 한국동력기계공학회[DOI]
- 손명규, "자동차 파킹기어와 멈춤쇠의 접촉위치에 따른안정성 연구", 한국기계기술학회지, 23(3), pp.378~384 (2021), 한국기계기술학회[DOI]
- ANSYS Inc, "Mechanical User’s Guide", ~ (2020)
- ANSYS Inc, "Mesh User’s Guide", ~ (2020)