콘크리트 믹서 감속기의 진동 평가
Vibration Evaluation of Concrete Mixer Reducer
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The differential planetary gear reducer as a main component of the concrete mixer driving mechanism requires a strong torque to mix concrete compounds. As this component is currently dependent on imports, it is necessary to develop it by conducting a study on vibration analysis and the resonance problem. The noise and vibration of a concrete mixer reducer increase owing to the transmission error of planetary gears, and the damage of components occurs owing to the problems in design and production. In this study, the tooth-passing frequency is calculated to evaluate the noise and vibration of a mixer reducer, and a fast Fourier transform (FFT) analysis is conducted through a vibration test using an acceleration sensor. The vibration of the reducer is measured at three points of input and output of the shaft and planetary gear housing with fixed and variable revolutions per minute. The operating conditions of gears and bearings are evaluated by performing the FFT analysis, and the resonance problem is verified. The results show that No. 1 pinion and ring gears revolve disproportionately. The amplitude values appear high, and the wear of tooth faces occur in tooth-passing frequencies and harmonic components of No. 1 and No. 2 pinion-ring gears. Therefore, we conclude that design changes in the reducer and a correction of tooth profiles are required.
Abstract
The differential planetary gear reducer as a main component of the concrete mixer driving mechanism requires a strong torque to mix concrete compounds. As this component is currently dependent on imports, it is necessary to develop it by conducting a study on vibration analysis and the resonance problem. The noise and vibration of a concrete mixer reducer increase owing to the transmission error of planetary gears, and the damage of components occurs owing to the problems in design and production. In this study, the tooth-passing frequency is calculated to evaluate the noise and vibration of a mixer reducer, and a fast Fourier transform (FFT) analysis is conducted through a vibration test using an acceleration sensor. The vibration of the reducer is measured at three points of input and output of the shaft and planetary gear housing with fixed and variable revolutions per minute. The operating conditions of gears and bearings are evaluated by performing the FFT analysis, and the resonance problem is verified. The results show that No. 1 pinion and ring gears revolve disproportionately. The amplitude values appear high, and the wear of tooth faces occur in tooth-passing frequencies and harmonic components of No. 1 and No. 2 pinion-ring gears. Therefore, we conclude that design changes in the reducer and a correction of tooth profiles are required.
참고문헌 (11)
- Kahraman, A., "Dynamic analysis of geared rotors by finite elements", Journal of Mechanical Design, Transactions of the American Society of Mechanical Engineers, 114, pp.507~514 (1992)
- Imwalle, D. E., "Load equalization in planetary gear systems", ASME publication at the Mechanisms Con-ference & International Symposium on Gearing and Transmissions, pp.232~238 (1972)
- Rating gear strength, "Castellani, G.", ASME, 37~43, pp.Paper No. 80-C2 (1980), DET-88
- Dynamic capacity and surface fatigue life for spur and helical gears, "Coy, J. J.", ASME, 56~73, pp.Paper No. 75-Lub-19 (1975)
- American Gear Manufacturers Assoc., "Rating the pitting resistance and bending strength of spur and helical involute gear teeth", AGMA Standard 218.01, 14~20 (1982)
- Dudley, D. W., "The Handbook of Practical Gear Design", pp.1.27~1.32 (1984), Mcgraw-Hill
- 배명호, "The Stress Analysis of Planetary Gear System of Mixer Reducer for Concrete Mixer Truck", 드라이브·컨트롤, 12(4), pp.77~81 (2015), 사단법인 유공압건설기계학회
- Bae, M. H., "An investiga-tion on vibration characteristics of vehicle transmis-sion", Transactions of the Korean Society for Noise and Vibration Engineering, 10(1), pp.107~116 (2000)
- Yang, B. S., "Condition Monitoring & Diagnostics", pp.364~372 (2006), Intervision Publishing Ltd.
- Lee, B. J., "Vibration and maintenance handbook of rotating machines" (1998), INCOSYS
- 조상경, "볼 베어링의 마멸 상태에 따른 진동 특성의 변화", 한국트라이볼로지학회지, 33(4), pp.141~147 (2017), 한국트라이볼로지학회[DOI]