6xxx계 알루미늄합금의 압출 금형용 SKD61 강재에 증착된 TiAlN, CrAlN 박막의 마찰․마모에 대한 연구
Study on the friction and wear characteristic of TiAlN and CrAlN coating on the SKD61 extrusion mold steel for 6xxx aluminum alloy
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this research, the friction and wear characteristic behaviors of coating materials of TiAlN and CrAlN were investigated. The wear test was conducted in air and un-lubricated state using the reciprocating friction wear tester. Temperature were 50 and 120℃, and load were 3, 7, and 11 kgf for tests. By comparing the coefficient of friction and observing the wear microstructure, the friction and wear characteristic behaviors of TiAlN and CrAlN coating layers on SKD61 were investigated. The coefficient of friction of CrAlN coating was lower than that of TiAlN at all conditions. Therefore, CrAlN was suggested to be more advantageous coating than TiAlN for the extrusion mold of aluminum
Abstract
In this research, the friction and wear characteristic behaviors of coating materials of TiAlN and CrAlN were investigated. The wear test was conducted in air and un-lubricated state using the reciprocating friction wear tester. Temperature were 50 and 120℃, and load were 3, 7, and 11 kgf for tests. By comparing the coefficient of friction and observing the wear microstructure, the friction and wear characteristic behaviors of TiAlN and CrAlN coating layers on SKD61 were investigated. The coefficient of friction of CrAlN coating was lower than that of TiAlN at all conditions. Therefore, CrAlN was suggested to be more advantageous coating than TiAlN for the extrusion mold of aluminum
참고문헌 (6)
- 장정환, "TiAlN+WC", C 다층코팅 SCM415강의 마찰․마모 특성에 관한 연구, 2010, pp.9(2), 40~46[DOI]
- 김상식, , 한국자동차공학회 1997년춘계학술대회 논문집, pp.617~ (1997)
- 이봉구, , 한국공작기계학회 논문집, 14, pp.2~ (2005)
- 정인수, , 2005년 대한기계학회 춘계 학술대회 논문집, pp.401~ (2005)
- K. Bobzin, , Surf. Coat. Technol, 204, pp.1097~ (2009)
- "R&B Technical Note", 52~ (2005)