티타늄 합금 플랜지 볼트 성형에서의 단조력 간접 측정을 위한 열간 단조 공정 모니터링에 관한 연구
A study on a hot forging process monitoring for measurement of indirect forging force in flange bolt forming of titanium alloys
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The objective of this study is to introduce the new possibility of sensing technology based on inductive displacement sensors to monitor the status of wheel position in the hot forging process. In order to validate effectiveness of proposed sensing technology, the indirect forging force measurement with displacement sensor was applied into a typical closed hot forging die-set used for the manufacturing of flange bolts. The locations to implement the displacement sensor were selected carefully by simulating forming process and static structural. From the measurement results of the forging force change during one hot forging cycle, it was found that the proposed monitoring system can provide useful information to understand the detailed behaviors of die-set in the closed hot forging process.
Abstract
The objective of this study is to introduce the new possibility of sensing technology based on inductive displacement sensors to monitor the status of wheel position in the hot forging process. In order to validate effectiveness of proposed sensing technology, the indirect forging force measurement with displacement sensor was applied into a typical closed hot forging die-set used for the manufacturing of flange bolts. The locations to implement the displacement sensor were selected carefully by simulating forming process and static structural. From the measurement results of the forging force change during one hot forging cycle, it was found that the proposed monitoring system can provide useful information to understand the detailed behaviors of die-set in the closed hot forging process.
참고문헌 (14)
- X. P. Liang, "Constitutive relationship for high temperature deformation of powder metallurgy Ti-47Al-2Cr-2Nb-0.2W alloy", Mater. Des., 37, pp.40~47 (2012)
- T. Carneiro, "Evaluation of ingots and alpha-extrusions of gamma alloys based on Ti-45Al-6Nb", Intermetallics, 13(9), pp.1000~1007 (2005)
- X. H. Wu, "Microstructural refinement in cast TiAl alloys by solid state transformations", Scr. Mater., 52(8), pp.731~734 (2005)
- W. J. Jia, "High-temperature deformation behavior of Ti60 titanium alloy", Mater. Sci. Eng. A, 528, pp.4068~4074 (2011)
- Y Su, "The high-temperature deformation behavior of a novel near-α titanium alloy and hot-forging based on the processing map", Vacuum, 173 (2020)
- I, EL-GALY, "Online Monitoring of Hot Die Forging Process using Acoustic Emission(PART I)", J. Acoustic Emission, 26, pp.208~219 (2008)
- A. Glaeser, "Remote machine mode detection in cold forging using vibration signal", Procedia Manufacturing, 48, pp.908~914 (2020)
- S. Y. Kim, "Monitoring of process and tool status in forging process by using bolt type piezo-senso", Procedia Manufacturing, 15, pp.542~549 (2018)
- M. Hawryluk, "Review of selected methods of increasing the life of forging tools in hot die forging processes", archives of civil and mechanical engineering, 16, pp.845~866 (2016)
- B. A. Behrens, "Acoustic emission technique for online monitoring during cold forging of steel components: a promising approach for online crack detection in metal forming processes", Prod. Eng. Res. Devel., 7, pp.423~432 (2013)
- I. EL-GALY, "ONLINE MONITORING OF HOT DIE FORGING PROCESSES USING ACOUSTIC EMISSION(PART I)", J. Acoustic Emission, 26, pp.208~219 (2008)
- Ono, K., "New goals for acoustic emission in material research", Keynote lecture, in Acoustic emission beyond the millennium (2000)
- B. A Behrens, "Potentials of in situ monitoring of aluminum alloy forging by acoustic emission", archives of civil and mechanical engineering, 16, pp.724~733 (2016)
- C. K. Mukhopadhyay, "Optimization of Positioning of an Acoustic Emission Sensor for Monitoring Hot Forging", Materials and Manufacturing Processes, 21, pp.543~549 (2006)