웨이블릿 교차상관관계를 이용한 변형체 선박의 휘핑 응답 식별
Identification of Whipping Response using Wavelet Cross-Correlation
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Identification of the whipping response out of the combined wave-vibration response of a flexible sea going vessel is one of the most interesting research topic from ship designer’s point of view. In order to achieve this goal, a novel methodology based on the wavelet cross-correlation technique was proposed in this paper. The cross-correlation of the wavelet power spectrum averaged across the frequency axis was introduced to check the similarity between the combined wave-vibration response and impulse response. The calculated cross-correlation of the wavelet power spectrum was normalized by the auto-correlation of the each spectrum with zero time lag, eventually providing the cross-correlation coefficient that stays between 0 and 1, precisely indicating the existence of the impulse response buried in the combined wave-vibration response. Additionally, the weight function was introduced while calculating the cross-correlation of the two spectrums in order to filter out the signal of lower frequency so that the accuracy of the similarity check becomes as high as possible. The validity of the proposed methodology was checked through the application to the artificially generated ideal combined wave-vibration signal, together with the more realistic signal obtained by running 3D hydroelasticity program WISH-Flex. The correspondence of the identified whipping instances between the results, one from the proposed method and the other from the calculated slamming modal force, was excellent.
Abstract
Identification of the whipping response out of the combined wave-vibration response of a flexible sea going vessel is one of the most interesting research topic from ship designer’s point of view. In order to achieve this goal, a novel methodology based on the wavelet cross-correlation technique was proposed in this paper. The cross-correlation of the wavelet power spectrum averaged across the frequency axis was introduced to check the similarity between the combined wave-vibration response and impulse response. The calculated cross-correlation of the wavelet power spectrum was normalized by the auto-correlation of the each spectrum with zero time lag, eventually providing the cross-correlation coefficient that stays between 0 and 1, precisely indicating the existence of the impulse response buried in the combined wave-vibration response. Additionally, the weight function was introduced while calculating the cross-correlation of the two spectrums in order to filter out the signal of lower frequency so that the accuracy of the similarity check becomes as high as possible. The validity of the proposed methodology was checked through the application to the artificially generated ideal combined wave-vibration signal, together with the more realistic signal obtained by running 3D hydroelasticity program WISH-Flex. The correspondence of the identified whipping instances between the results, one from the proposed method and the other from the calculated slamming modal force, was excellent.
참고문헌 (15)
- Amin, W, "Analysis of Wave Slam Induced Hull Vibrations using Continuous Wavelet Transforms", Ocean Engineering, 58(15), pp.154~166 (2012)
- Du, S.X, "Wavelet Analysis of Loads on a Flexible Ship Model Traveling in Large-Amplitude Waves", Journal of Ship Research, 52(4), pp.249~262 (2008)
- Ermanyuk, E.V., "Impact of a Disc on Shallow Water", Journal of Fluids and Structures, 20, pp.345~357 (2005)
- Kim, J.H., "Ship Springing Analysis for a Very Large Containership", International Journal of Offshore and Polar Engineering, 22(3), pp.217~224 (2012)
- Kim, J.H., "Study on ship structural hydroelasticity and fatigue assessment in irregular seaways", Proceedings of ASME 32nd International Conference on Ocean (2013), Offshore and Arctic Engineering
- Kwon, S.H., "Wavelet Transform based Coherence Analysis of Freak Wave and Its Impact", Ocean Engineering, 32(13), pp.1572~1589 (2005)
- Lardies, J., "Identification of Modal Parameters using the Wavelet Transform", International Journal of Mechanical Sciences, 44, pp.2263~2283 (2002)
- Li, H., "Application of Wavelet Cross-correlation Analysis to a Plane Turbulent Jet", JSME International Journal, Series B 40(1), pp.1~19 (1997)
- Marven, C., "A Simple Approach to Digital Signal Processing" (1996), John Wiley &Sons. Inc
- Primer, A., "Introduction to Wavelets and Wavelet Transforms" (1998), Prentice Hall
- Ruzzene, M., "Natural Frequencies and Damping Identification Using Wavelet Transform : Application to Real Data", Mechanical Systems and Signal Processing, 11, pp.207~218 (1997)
- Staszewski, W. J., "Identification of Damping in MDOF Systems Using Time-Sale Decomposition", Journal of Sound and Vibration, 203(2), pp.283~305 (1997)
- Staszewski, W.J., "Flutter data analysis using the wavelet transform", Proceedings of the MV2 International Congress on New Advances in Modal Synthesis of Large Structure: Nonlinear Damped and Non-Deterministic Cases, Lyon, pp.549~561 (1995)
- Staszewski, W.J, "Wavelet approach to flutter data analysis", AIAA Journal of Aircraft, 39(1), pp.125~132 (1997)
- Storhaug, G., "Experimental investigation of wave induced vibrations and their effect on the fatigue loading of ships", 박사, pp.2007