극후판 EH40 TMCP강재 Tandem EGW 용접부의 잔류응력 해석
Numerical Analysis of Welding Residual Stresses for Ultra-Thick Plate of EH40 Steel Joined by Tandem EGW
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Deck plates and hatch coming of large container carrier and offshore structures are joined by ultra-thick plates whose thickness is more than 60mm. Traditionally FCAW has been used to join the thick plates in butt joint. However, FCAW has been replaced with EGW since the welding efficiency of EGW is higher than that of FCAW. Tandem EGW using two electrodes has been applied to vertical position welding by several shipyards. EGW requires one or two layers of bead whereas FCAW requires more than 20 layers of weld bead in thick welding. However, high welding residual stresses are generated by EGW since it uses higher heat input than FCAW. In the present study, a finite element model is suggested to predict the residual stresses induced by the tandem EGW. Butt specimen of EH40 TMCP shipbuilding steel plates vertical welding was modeled by a three-dimensional model. Residual stresses were measured by X-ray diffraction method and to verify the numerical result. The results show a good agreement with experimental result.
Abstract
Deck plates and hatch coming of large container carrier and offshore structures are joined by ultra-thick plates whose thickness is more than 60mm. Traditionally FCAW has been used to join the thick plates in butt joint. However, FCAW has been replaced with EGW since the welding efficiency of EGW is higher than that of FCAW. Tandem EGW using two electrodes has been applied to vertical position welding by several shipyards. EGW requires one or two layers of bead whereas FCAW requires more than 20 layers of weld bead in thick welding. However, high welding residual stresses are generated by EGW since it uses higher heat input than FCAW. In the present study, a finite element model is suggested to predict the residual stresses induced by the tandem EGW. Butt specimen of EH40 TMCP shipbuilding steel plates vertical welding was modeled by a three-dimensional model. Residual stresses were measured by X-ray diffraction method and to verify the numerical result. The results show a good agreement with experimental result.
참고문헌 (22)
- Armentani, E, "The effect of thermal properties and weld efficiency on residual stresses in welding", Journal of Achievements in Materials and Manufacturing Engineering, 20(1), pp.319~322 (2007)
- 방한서, "루트부 갭이 있는 양면 필릿용접 이음부의 용접잔류응력 분포", 대한조선학회 논문집, 39(3), pp.10~88 (2002), 대한조선학회
- 방희선, "고강도 극후판 EH36-TMCP강 EGW용접부의 역학적 거동 및 파괴인성 KIC에 관한 해석", 한국전산구조공학회논문집, 22(6), pp.565~572 (2009), 한국전산구조공학회
- Chang, P.H, "Numerical and Experimental Investigations on the Residual Stresses of the Butt-Welded Joints", Journal of Computational Materials Science,, 29(4), pp.511~522 (2003)
- Chun, K.S, "Measurement of Welding Residual Stresses by X-ray Diffraction Method", Proceedings of the Annual Autumn Meeting, Journal of the Society of Naval Architects of Korea, pp.208~213 (2007)
- Goldak, J, "A New Finite Element Model for Welding Heat Sources", Metallurgical Transactions, 15(2), pp.299~305 (1983)
- 한일욱, "조선·해양 부문의 강재 개발 동향 및 용접성", 대한용접접합학회지, 27(1), pp.25~33 (2009), 대한용접접합학회
- Im, S.W, "Fatigue Performance of EH40-TM Steel Plate for Container Carrier", Proceedings of the Nineteenth 2009 International Offshore and Polar Engineering Conference, pp.361~365 (2009)
- 정홍철, "대입열 EH36-TM강의 Tendem EGW용접부 미세조직 및 기계적 성질", 대한용접접합학회지, 25(1), pp.57~62 (2007), 대한용접접합학회
- Kim, I.S, "A Study on Analysis of Heat Transfer and Residual Stress in the Weld Zone using FEM", Journal of Korea Society of Machine Tool Engineers, 9(5), pp.96~104 (2000)
- 이장현, "비드의 용용상태를 고려한 가스메탈 아크용접의 3차원 열탄소성변형 해석", 대한조선학회 논문집, 39(1), pp.6~60 (2002), 대한조선학회
- Lee, C.H, "Three-dimensional finite element simulation of residual stresses in circumferential welds of steel pipe including pipe diameter effects", Materials Science and Engineering: A, 487(1-2), pp.210~218 (2008)
- Lee, J.H, "Effect of Melting Pool in the Residual Stress of Welded Structures in Finite Element Analysis", Journal of Ship and Ocean Technology, 11(3), pp.14~23 (2007)
- Masubuchi, K, "Analysis of Welded Structures" (1980), Pergamon Press
- 박철성, "대입열 수직상진 용접의 조선적용에 관한 연구", 대한조선학회 논문집, 44(5), pp.482~487 (2007), 대한조선학회
- Rykalin, R.R, "Energy Source for Welding. Houdrement Lecture", International Institute of Welding, 1~23 (1974)
- Rosenthal, D, "Mathematical theory of heat distribution during welding and cutting", Welding Journal, 20(5), pp.2205~2345 (1941)
- Development of Two-electrode Electrogas Arc Welding Process, "Sasaki, K", Nippon Steel Technical Report, 67~74, pp.No. 90 (2004)
- 신대희, "유한요소해석을 이용한 채널 I 형 잠호 맞대기 용접부의 변형 및 잔류 응력 예측에 관한 연구", 대한조선학회 논문집, 44(6), pp.598~604 (2007), 대한조선학회
- 송하철, "용접잔류응력의 이완과 재분포 해석 및 실험적 검증", 대한조선학회 논문집, 41(6), pp.84~90 (2004), 대한조선학회
- Simon, N.J, "Properties of Copper and Copper Alloys at Cryogenic Temperatures", pp.179~177 (1992), NIST Monograph
- Teng, T.L, "Effect of Residual stresses on fatigue crack initiation life for butt-welded joints", Journal of Materials Processing Technology, 145, pp.325~335 (2004)