The sensitivity of ship resistance to wall-adjacent grids and near-wall treatments
2
조회
0
다운로드
3
인용
0
참고문헌
초록
Numerical simulations of turbulent flows around KCS have been performed to study the sensitivity of ship resistance to wall-adjacent grids and disclose the influence of near-wall treatment on the sensitivity of ship resistance. The resistance coefficients of viscous and pressure forces were compared when using realizable k-ε and SST k-u turbulence models in structured and unstructured grids, respectively. The calculation of friction velocity was found to be mainly responsible for the reduction of viscous and total resistances when the height of wall-adjacent cells increased. Since the assumption of equilibrium state between turbulent production and dissipation was not met in a bulbous bow, it was more reasonable to iteratively calculate the friction velocity from empirical laws of the wall for near-wall treatment rather than explicitly estimate it from the turbulent kinetic energy.
Abstract
Numerical simulations of turbulent flows around KCS have been performed to study the sensitivity of ship resistance to wall-adjacent grids and disclose the influence of near-wall treatment on the sensitivity of ship resistance. The resistance coefficients of viscous and pressure forces were compared when using realizable k-ε and SST k-u turbulence models in structured and unstructured grids, respectively. The calculation of friction velocity was found to be mainly responsible for the reduction of viscous and total resistances when the height of wall-adjacent cells increased. Since the assumption of equilibrium state between turbulent production and dissipation was not met in a bulbous bow, it was more reasonable to iteratively calculate the friction velocity from empirical laws of the wall for near-wall treatment rather than explicitly estimate it from the turbulent kinetic energy.
참고문헌 (16)
- Banks, J., "RANS simulations of the multiphase flow around the KCS hull form", Gothenburg 2010;CFDWorkshop in Ship Hydrodynamics (2010)
- Choi, J. -E., "Resistance and propulsion characteristics of various commercial ships based on CFD results", Ocean Eng, 37(7), pp.549~566 (2010)
- Cowles, G. W., "A Parallel Viscous Multiblock Flow Solver for Free Surface Flows Pas Complex Geometries", PhD, Department of Mechanical and Aerospace Engineering, pp.2001
- Craft, T. J., "Progress in the generalization of wall function treatments", Int. J. Heat Fluid Flow, 23(2), pp.148~160 (2002)
- Guo, B. J., "Verification and validation of numerical calculation of ship resistance and flow field of a large tanker", Ships Offshore Struct, 8(1), pp.3~14 (2013)
- 김건홍, "Development of a numerical simulation tool for efficient and robust prediction of ship resistance", International Journal of Naval Architecture and Ocean Engineering, 9(5), pp.537~551 (2017), 대한조선학회
- Kim, W. J., "Measurement of flows around modern commercial ship models", Exp. Fluid, 31, pp.567~578 (2001)
- Launder, B. E., "Lectures in Mathematical Models of Turbulence" (1972), Academic Press
- Lee, S. B., "of OpenFOAM to prediction of hull resistance", 9th International OpenFOAM Workshop (2014)
- Menter, F. R., "Ten Years of Industrial Experience with the SST Turbulence Model", Turbulence, Heat and Mass Transfer (2003), Begell House, Inc
- 박선호, "Investigation on the wall function implementation for the prediction of ship resistance", International Journal of Naval Architecture and Ocean Engineering, 5(1), pp.33~46 (2013), 대한조선학회
- Pope, S. B., "Turbulent Flows" (2000), Cambridge University Press
- Rusche, H., "Computational Fluid Dynamics of Dispersed Two-phase Flows at High Phase Fraction", PhD, pp.2002
- Spalding, D. B., "A single formula for the law of the wall", Trans. ASME Series E: J. Appl. Mech, 28, pp.455~458 (1961)
- van Leer, B., "Towards the ultimate conservation difference scheme", J. Comput. Phys, 32(1), pp.101~136 (1979)
- Wilson, R. V., "Comprehensive approach to verification and validation of CFD simulations e Part 2: application for RANS simulation of a cargo container ship", ASME J. Fluids Eng, 123, pp.803~810 (2001)