A numerical study on the feasibility of predicting the resistance of a full-scale ship using a virtual fluid
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In general, the resistance of a real ship is estimated using an extrapolation method after doing experimental tests or numerical simulations with a model scale ship. Since the only Froude similarity is applied in the model test and simulation, the flow characteristics between the model and real ships could be different due to the inconsistency of Reynolds number. However, in the Computational Fluid Dynamics (CFD), the Froude and Reynolds numbers can be satisfied simultaneously because a fluid with virtual properties can be applied. This study investigated the effect of turbulence models and scales for a flat plate. And then the hydrodynamic feasibility of using a virtual fluid was investigated through numerical analysis. The resistance performance and flow structure of the ship were analysed by applying the virtual fluid, and they were confirmed how well these values and flow characteristics simulate the full-scale with a real fluid. This study shows that the results of a full-scale can be obtained at model scale by applying a virtual fluid instead of full-scale numerical simulations that require more computational resources.
Abstract
In general, the resistance of a real ship is estimated using an extrapolation method after doing experimental tests or numerical simulations with a model scale ship. Since the only Froude similarity is applied in the model test and simulation, the flow characteristics between the model and real ships could be different due to the inconsistency of Reynolds number. However, in the Computational Fluid Dynamics (CFD), the Froude and Reynolds numbers can be satisfied simultaneously because a fluid with virtual properties can be applied. This study investigated the effect of turbulence models and scales for a flat plate. And then the hydrodynamic feasibility of using a virtual fluid was investigated through numerical analysis. The resistance performance and flow structure of the ship were analysed by applying the virtual fluid, and they were confirmed how well these values and flow characteristics simulate the full-scale with a real fluid. This study shows that the results of a full-scale can be obtained at model scale by applying a virtual fluid instead of full-scale numerical simulations that require more computational resources.
참고문헌 (27)
- Carrica, P. M., "Self-propulsion computations using a speed controller and a discretized propeller with dynamic overset grids", J. Mar. Sci. Technol, 15, pp.316~330 (2011)
- Castro, A. M., "Full scale self-propulsion computations using discretized propeller for the KRISO container ship KCS", Comput. Fluid, 51(1), pp.35~47 (2011)
- Choi, J. -K., "A study of using wall function for numerical analysis of high Reynolds number turbulent flow", J. Soc. Naval Arch. Korea, 47(5), pp.647~655 (2010)
- Choi, J. -K., "An investigation on the effect of the wall treatments in RANS simulations of model and full-scale marine propeller flows", Int. J. Nav. Archit. Ocean Eng, 12, pp.967~987 (2020)
- Ha, Y. -J., "Numerical simulation of turbulent flow around KLNG hull form with different scale ratio", J. Soc. Naval Arch. Korea, 51(1), pp.8~15 (2014)
- Haase, M., "Novel CFDbased full-scale resistance prediction for large medium-speed catamarans", Ocean. Eng, 111, pp.198~208 (2016)
- Haase, M., "Full-scale resistance prediction in finite waters: a study using computational fluid dynamics simulations, model test experiments and sea trial measurements", Proc. IME M J. Eng. Marit. Environ, 231(1), pp.316~328 (2017)[DOI]
- Haase, M., "Underwater glider performance at model-scale and full-scale Reynolds numbers", Proceedings of International Maritime Conference, pp.3~5 (2017)
- ITTC, "Uncertainty Analysis, Example for Resistance Test. ITTC recommended procedures and guidelines, Procedure 75-02-02-02", ~ (2002)
- Kim, B. -N., "Calculation of flows around container ship models with different Reynolds numbers", J. Soc. Naval Arch. Korea, 44(3), pp.258~266 (2007)
- Kim, D. -Y., "Numerical study on the extrapolation method for predicting the full-scale resistance of a ship with an air lubrication system", J. Ocean Eng. Technol, 34(6), pp.387~393 (2020)
- Kim, H. -R., "Experimental study on turbulent structure of flow around KRISO 3600TEU container double-deck model", J. Soc. Naval Arch. Korea, 36(3), pp.8~14 (1999)
- Kim, K. -W., "A study on the efficient numerical analysis for the prediction of full-scale propeller performance using CFD", Ocean. Eng, 240, pp.109931~ (2021)
- Kim, W. -J., "Measurement of flows around modern commercial ship models", Exp. Fluid, 31, pp.567~578 (2001)
- Lee, S. -J., "PIV measurements of wake behind a KRISO 3600TEU container ship model", J. Soc. Naval Arch. Korea, 39(3), pp.48~56 (2002)
- Menter, F. R., "Two-equation eddy-viscosity turbulence models for engineering applications", AIAA journal, 32(8), pp.1598~1605 (1994)
- Ng’aru, J. M., "Computational analysis of KCS model with an equalizing duct", J. Ocean Eng. Technol, 35(4), pp.247~256 (2021)
- Park, D. W., "The sensitivity of ship resistance to wall-adjacent grids and near-wall treatments", Int. J. Nav. Archit. Ocean Eng, 10, pp.683~691 (2018)
- Sezen, S., "Numerical prediction of total resistance using fully similarity technique", China Ocean Eng, 33, pp.493~502 (2019)
- Terziev, M., "A geosim analysis of ship resistance decomposition and scale effects with the aid of CFD", Appl. Ocean Res, 92, pp.101930~ (2019)
- Terziev, M., "Exploring the effects of speed and scale on a ship’s form factor using CFD", Int. J. Nav. Archit. Ocean Eng, 13, pp.147~162 (2021)
- Terziev, M., "Scale effects and full-scale ship hydrodynamics : a review", Ocean. Eng, 245, pp.110496~ (2022)
- "2015 A Workshop on CFD in Ship Hydrodynamics" (2015)[URL]
- Van, S. -H., "Experimental investigation of local flow around KRISO 3600TEU container ship model in towing tank", J. Soc. Naval Arch. Korea, 37(3), pp.1~10 (2000)
- Wilcox, D. C., "Reassessment of the scale-determining equation for advanced turbulence models", AIAA journal, 26(11), pp.1299~1310 (1988)
- Yang, H. -U., "Wake comparison between model and full scale ships using CFD", J. Soc. Naval Arch. Korea, 47(2), pp.150~162 (2010)
- Zhao, Q., "Study on self-propulsion experiment of ship model with energy-saving devices based on numerical simulation methods", Ships Offshore Struct, 10, pp.669~677 (2015)