Physicochemical Properties of Different Phases of Titanium Dioxide Nanoparticles
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The physicochemical properties of crystalline titanium dioxide nanoparticles (TiO2 NPs) were investigated by comparing amorphous (amTiO2), anatase (aTiO2), metaphase of anatase-rutile (arTiO2), and rutile (rTiO2) NPs, which were prepared at various calcination temperatures (100℃, 400℃, 600℃, and 900℃). X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses confirmed that the phase-transformed TiO2 had the characteristic features of crystallinity and average size. The surface chemical properties of the crystalline phases were different in the spectral analysis. As anatase transformed to the rutile phase, the band of the hydroxyl group at 3,600–3,100 cm–1 decreased gradually, as assessed using Fourier transform infrared spectroscopy (FT-IR). For ultraviolet-visible (UVVis) spectra, the maximum absorbance of anatase TiO2 NPs at 309 nm was blue-shifted to 290 nm at the rutile phase with reduced absorbance. Under the electric field of capillary electrophoresis (CE), TiO2 NPs in anatase migrated and detected as a broaden peak, whereas the rutile NPs did not. In addition, anatase showed the highest photocatalytic activity in an UV-irradiated dye degradation assay in the following order: aTiO2 > arTiO2 > rTiO2. Overall, the phases of TiO2 NPs showed characteristic physicochemical properties regarding size, surface chemical properties, UV absorbance, CE migration, and photocatalytic activity.
Abstract
The physicochemical properties of crystalline titanium dioxide nanoparticles (TiO2 NPs) were investigated by comparing amorphous (amTiO2), anatase (aTiO2), metaphase of anatase-rutile (arTiO2), and rutile (rTiO2) NPs, which were prepared at various calcination temperatures (100℃, 400℃, 600℃, and 900℃). X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses confirmed that the phase-transformed TiO2 had the characteristic features of crystallinity and average size. The surface chemical properties of the crystalline phases were different in the spectral analysis. As anatase transformed to the rutile phase, the band of the hydroxyl group at 3,600–3,100 cm–1 decreased gradually, as assessed using Fourier transform infrared spectroscopy (FT-IR). For ultraviolet-visible (UVVis) spectra, the maximum absorbance of anatase TiO2 NPs at 309 nm was blue-shifted to 290 nm at the rutile phase with reduced absorbance. Under the electric field of capillary electrophoresis (CE), TiO2 NPs in anatase migrated and detected as a broaden peak, whereas the rutile NPs did not. In addition, anatase showed the highest photocatalytic activity in an UV-irradiated dye degradation assay in the following order: aTiO2 > arTiO2 > rTiO2. Overall, the phases of TiO2 NPs showed characteristic physicochemical properties regarding size, surface chemical properties, UV absorbance, CE migration, and photocatalytic activity.
참고문헌 (20)
- Hashimoto K, "TiO2 photocatalysis : a historical overview and future prospects", Jpn J Appl Phys, 44, pp.8269~8285 (2005)[DOI]
- Bachler G, "Using physiologically based pharmacokinetic(PBPK)modeling for dietary risk assessment of titanium dioxide(TiO2)nanoparticles", Nanotoxicology, 9, pp.373~380 (2015)[DOI]
- Weir A, "Titanium dioxide nanoparticles in food and personal care products", Environ Sci Technol, 46, pp.2242~2250 (2012)[DOI]
- Kulkarni M, "Titanium nanostructures for biomedical applications", Nanotechnology, 26, pp.062002~ (2015)[DOI]
- Waghmode MS, "Studies on the titanium dioxide nanoparticles: biosynthesis, applications and remediation", SN Appl Sci, 1, pp.310~ (2019)[DOI]
- Almaguer-Flores A, "Bacterial adhesion on amorphous and crystalline metal oxide coatings", Mater Sci Eng C Mater Biol Appl, 57, pp.88~99 (2015)[DOI]
- Zhao X, "Delicate refinement of surface nanotopography by adjusting TiO2 coating chemical composition for enhanced interfacial biocompatibility", ACS Appl Mater Interfaces, 5, pp.8203~8209 (2013)[DOI]
- Cimpean A, "Effects of LP-MOCVD prepared TiO2 thin films on the in vitro behavior of gingival fibroblasts", Mater Chem Phys, 125, pp.485~492 (2011)[DOI]
- Shirkavand S, "Effect of TiO2 nanoparticles on tensile strength of dental acrylic resins", J Dent Res Dent Clin Dent Prospects, 8, pp.197~203 (2014)[DOI]
- Bahremandi Tolou N, "The effect of adding TiO2 nanoparticles on dental amalgam properties", Iran J Mater Sci Eng, 10, pp.46~56 (2013)
- Koparde VN, "Phase transformations during sintering of titania nanoparticles", ACS Nano, 2, pp.1620~1624 (2008)[DOI]
- Matthews A, "The crystallization of anatase and rutile from amorphous titanium dioxide under hydrothermal conditions", Am Mineral, 61, pp.419~424 (1976)
- Khatim O, "Amorphous–anatase phase transition in single immobilized TiO2 nanoparticles", Chem Phys Lett, 558, pp.53~56 (2013)[DOI]
- Hanaor DAH, "Review of the anatase to rutile phase transformation", J Mater Sci, 46, pp.855~874 (2011)[DOI]
- Gouma PI, "Anatase-to-rutile transformation in titania powders", J Am Ceram Soc, 84, pp.619~622 (2001)[DOI]
- Kavan L, "Electrochemical and photoelectrochemical investigation of singlecrystal anatase", J Am Chem Soc, 118, pp.6716~6723 (1996)[DOI]
- Xu M, "Photocatalytic activity of bulk TiO2 anatase and rutile single crystals using infrared absorption spectroscopy", Phys Rev Lett, 106, pp.138302~ (2011)[DOI]
- Tang H, "Electrical and optical properties of TiO2 anatase thin films", J Appl Phys, 75, pp.2042~2047 (1994)[DOI]
- Luttrell T, "Why is anatase a better photocatalyst than rutile?--model studies on epitaxial TiO2 films", Sci Rep, 4, pp.4043~ (2014)[DOI]
- Liu L, "Photocatalytic CO2 reduction with H2O on TiO2 nanocrystals: comparison of anatase, rutile, and brookite polymorphs and exploration of surface chemistry", ACS Catal, 2, pp.1817~1828 (2012)[DOI]