Effect of Cu doping on structural properties and photocatalytic activity of TiO2 nanoparticles synthesized by sol-gel method
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
TiO2 nanoparticles with varied content of Cu doping have been synthesized by sol-gel method with the addition of polyethyleneglycol (PEG) as a template. The content of Cu doping significantly influenced the structure and morphology of TiO2nanoparticles. Increasing content of Cu doping caused a phase transformation of TiO2 crystal from rutile to anatase. As wellas the surface morphology of TiO2 nanoparticles also significantly were affected by Cu doping, which the TiO2 particlesbecame more finer due to the Cu content increased. The effect of Cu doping on the photocatalytic activity of TiO2 in degradingmethyl violet (MV) dye was investigated. Photocatalysis test results confirmed that the content of Cu doping in the TiO2photocatalyst significantly affected the photocatalytic activity of TiO2 for photodegradation of MV dye. Increasing content ofCu doping increased the degradation rate of MV dye. The TiO2 photocatalyst with the highest Cu doping content (6.0 wt%Cu) has the best photocatalytic activity than the other TiO2 photocatalyst, that is able to degrade MV dye up to 95% after120 minutes of photocatalysis treatment with a degradation rate is 0.0214 ppm per minute. The pH of MV solution alsoinfluenced the photocatalytic activity of TiO2, which the MV dye solution with higher pH has higher the photodegradationefficiency.
Abstract
TiO2 nanoparticles with varied content of Cu doping have been synthesized by sol-gel method with the addition of polyethyleneglycol (PEG) as a template. The content of Cu doping significantly influenced the structure and morphology of TiO2nanoparticles. Increasing content of Cu doping caused a phase transformation of TiO2 crystal from rutile to anatase. As wellas the surface morphology of TiO2 nanoparticles also significantly were affected by Cu doping, which the TiO2 particlesbecame more finer due to the Cu content increased. The effect of Cu doping on the photocatalytic activity of TiO2 in degradingmethyl violet (MV) dye was investigated. Photocatalysis test results confirmed that the content of Cu doping in the TiO2photocatalyst significantly affected the photocatalytic activity of TiO2 for photodegradation of MV dye. Increasing content ofCu doping increased the degradation rate of MV dye. The TiO2 photocatalyst with the highest Cu doping content (6.0 wt%Cu) has the best photocatalytic activity than the other TiO2 photocatalyst, that is able to degrade MV dye up to 95% after120 minutes of photocatalysis treatment with a degradation rate is 0.0214 ppm per minute. The pH of MV solution alsoinfluenced the photocatalytic activity of TiO2, which the MV dye solution with higher pH has higher the photodegradationefficiency.
참고문헌 (31)
- S.A. Omar, , J. Environ. Sci. Technol., 9, pp.149~156 (2016)[DOI]
- S. Arora, , J. Bioremed. Biodeg., 5(3), pp.1000e146~ (2014)
- J. Sima, , Chem. Eng. Transac., 32, pp.79~84 (2013)
- S. Yang, , Int. J. of Photoenergy., pp.5~ (2013)
- R. Kant, , Natural Science, 4(1), pp.22~26 (2012)[DOI]
- M. Smelcerovic, , J. Serb. Chem. Soc., 75, pp.855~872 (2010)[DOI]
- M.S. Lucas, , Water Research, 41(5), pp.1103~1109 (2007)[DOI]
- S.-A. Ong, , J. Hazard. Mater. B, 124, pp.88~94 (2005)[DOI]
- N. Manikandan, , J. Environ. Anal. Toxicol., 2(8), pp.1000160~ (2012)
- O. Prieto, , Solar Energy, 79, pp.376~383 (2005)[DOI]
- N. Sobana, , Sep. Purif. Technol., 62, pp.648~653 (2008)[DOI]
- S. Selvakumar, , Biotech, 3(1), pp.71~79 (2013)
- M. Muruganandham, , Solar Energy Materials & Solar Cells, 81, pp.439~457 (2004)[DOI]
- K. Hashimoto, , Jpn. J. Appl. Phys., 44, pp.8269~8285 (2005)[DOI]
- A. Hosseinnia, , World Appl. Sci., 8(11), pp.1327~1332 (2010)
- J-Y. Li, , J. Environ. Sci., 19, pp.892~896 (2007)[DOI]
- Q. Xiao, , Solar Energy, 82, pp.706~713 (2008)[DOI]
- Y-L. Min, , Sep. Purif. Technol., 106, pp.97~104 (2013)[DOI]
- T. Ji, , Mater. Lett., 63, pp.2044~2046 (2009)[DOI]
- K. Villa, , J. Peral, Solar Energy, 86, pp.558~566 (2012)[DOI]
- M. Gharagozlou, , Mater. Res. Bull., 61, pp.340~347 (2015)[DOI]
- A.D. Mani, , Mater. Res. Bull., 61, pp.391~399 (2015)[DOI]
- N. Lu, , Sep. Purif. Technol., 62, pp.668~673 (2008)[DOI]
- S. Sood, , New J. Chem., 38, pp.3127~3136 (2014)[DOI]
- L.S. Yoong, , Energy, 34(10), pp.1652~1661 (2009)[DOI]
- G. Colon, , Appl. Catal. B: Environ., 67, pp.41~51 (2006)[DOI]
- X-J. Yang, , Trans. Nonferrous Met. Soc. China., 25(2), pp.504~509 (2015)[DOI]
- C-Y. Tsai, , Aer. Air Qual. Res., 13, pp.639~648 (2013)
- D. He, , Mater. Lett., 61, pp.3385~3387 (2007)[DOI]
- S. Park, , Mater. Lett., 138, pp.110~112 (2015)[DOI]
- F. Bayansal, , Ceramic International, 38, pp.1859~1866 (2012)[DOI]