Bonding of a resin-modified glass ionomer cement to dentin using universal adhesives
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: This study aims to assess the effect of universal adhesives pretreatment on the bond strength of resin-modified glass ionomer cement to dentin. Materials: and Methods Fifty caries-free human third molars were employed. The teeth were randomly assigned into five groups (n = 10) based on dentin surface pretreatments: Single Bond Universal (3M Oral Care), Gluma Bond Universal (Heraeus Kulzer), Prime&Bond Elect (Dentsply), Cavity Conditioner (GC) and control (no surface treatment). After Fuji II LC (GC) was bonded to the dentin surfaces, the specimens were stored for 7 days at 37°C. The specimens were segmented into microspecimens, and the microspecimens were subjugated to microtensile bond strength testing (1.0 mm/min). The modes of failure analyzed using a stereomicroscope and scanning electron microscopy. Data were statistically analyzed with one-way analysis of variance and Duncan tests (p = 0.05). Results: The surface pretreatments with the universal adhesives and conditioner increased the bond strength of Fuji II LC to dentin (p < 0.05). Single Bond Universal and Gluma Bond Universal provided higher bond strength to Fuji II LC than Cavity Conditioner (p < 0.05). The bond strengths obtained from Prime&Bond Elect and Cavity Conditioner were not statistically different (p > 0.05). Conclusions: The universal adhesives and polyacrylic acid conditioner could increase the bond strength of resin-modified glass ionomer cement (RMGIC) to dentin. The use of universal adhesives before the application of RMGIC may be more beneficial in improving bond strength.
Abstract
Objectives: This study aims to assess the effect of universal adhesives pretreatment on the bond strength of resin-modified glass ionomer cement to dentin. Materials: and Methods Fifty caries-free human third molars were employed. The teeth were randomly assigned into five groups (n = 10) based on dentin surface pretreatments: Single Bond Universal (3M Oral Care), Gluma Bond Universal (Heraeus Kulzer), Prime&Bond Elect (Dentsply), Cavity Conditioner (GC) and control (no surface treatment). After Fuji II LC (GC) was bonded to the dentin surfaces, the specimens were stored for 7 days at 37°C. The specimens were segmented into microspecimens, and the microspecimens were subjugated to microtensile bond strength testing (1.0 mm/min). The modes of failure analyzed using a stereomicroscope and scanning electron microscopy. Data were statistically analyzed with one-way analysis of variance and Duncan tests (p = 0.05). Results: The surface pretreatments with the universal adhesives and conditioner increased the bond strength of Fuji II LC to dentin (p < 0.05). Single Bond Universal and Gluma Bond Universal provided higher bond strength to Fuji II LC than Cavity Conditioner (p < 0.05). The bond strengths obtained from Prime&Bond Elect and Cavity Conditioner were not statistically different (p > 0.05). Conclusions: The universal adhesives and polyacrylic acid conditioner could increase the bond strength of resin-modified glass ionomer cement (RMGIC) to dentin. The use of universal adhesives before the application of RMGIC may be more beneficial in improving bond strength.
참고문헌 (30)
- Wilson AD, "A new translucent cement for dentistry. The glass ionomer cement", Br Dent J, 132, pp.133~135 (1972)
- Garoushi S, "Characterization of fluoride releasing restorative dental materials", Dent Mater J, 37, pp.293~300 (2018)
- Burgess J, "Resin ionomer restorative materials : the new generation", J Esthet Dent, 6, pp.207~215 (1994)
- Saad A, "Microtensile bond strength of resin-modified glass ionomer cement to sound and artificial caries-affected root dentin with different conditioning", Oper Dent, 42, pp.626~635 (2017)
- Imbery TA, "Evaluating dentin surface treatments for resin-modified glass ionomer restorative materials", Oper Dent, 38, pp.429~438 (2013)
- Hoshika S, "Effect of conditioning and aging on the bond strength and interfacial morphology of glass-ionomer cement bonded to dentin", J Adhes Dent, 17, pp.141~146 (2015)
- Cardoso MV, "Towards a better understanding of the adhesion mechanism of resin-modified glass-ionomers by bonding to differently prepared dentin", J Dent, 38, pp.921~929 (2010)
- Coutinho E, "Development of a self-etch adhesive for resin-modified glass ionomers", J Dent Res, 85, pp.349~353 (2006)
- Vargas MA, "Bond strengths of glass ionomers using a dentin adhesive", Am J Dent, 8, pp.197~200 (1995)
- El-Askary F, "Bonding nano-filled resin-modified glass ionomer to dentin using different self-etch adhesives", Oper Dent, 36, pp.413~421 (2011)
- Poggio C, "Effects of dentin surface treatments on shear bond strength of glass-ionomer cements", Ann Stomatol(Roma), 5, pp.15~22 (2014)
- Saad A, "Effect of dentin contamination with two hemostatic agents on bond strength of resin-modified glass ionomer cement with different conditioning", Dent Mater J, 38, pp.257~263 (2019)
- Dursun E, "Combination of a self-etching adhesive and a resin-modified glass ionomer : effect of water and saliva contamination on bond strength to dentin", J Adhes Dent, 13, pp.439~443 (2011)
- Besnault C, "Self-etching adhesives improve the shear bond strength of a resin-modified glass-ionomer cement to dentin", J Adhes Dent, 6, pp.55~59 (2004)
- Pereira PN, "Adhesion of resin-modified glass ionomer cements using resin bonding systems", J Dent, 26, pp.479~485 (1998)
- Van Meerbeek B, "State of the art of self-etch adhesives", Dent Mater, 27, pp.17~28 (2011)
- Wagner A, "Bonding performance of universal adhesives in different etching modes", J Dent, 42, pp.800~807 (2014)
- Cuevas-Suárez CE, "Bonding performance of universal adhesives : an updated systematic review and meta-analysis", J Adhes Dent, 21, pp.7~26 (2019)
- Rosa WL, "Bond strength of universal adhesives : a systematic review and meta-analysis", J Dent, 43, pp.765~776 (2015)
- Sofan E, "Classification review of dental adhesive systems: from the IV generation to the universal type", Ann Stomatol (Roma), 8, pp.1~17 (2017)
- Hanabusa M, "Bonding effectiveness of a new ‘multi-mode’ adhesive to enamel and dentine", J Dent, 40, pp.475~484 (2012)
- Takamizawa T, "SEM observation of novel characteristic of the dentin bond interfaces of universal adhesives", Dent Mater, 35, pp.1791~1804 (2019)
- Cook NB, "Bonding ability of paste-paste glass ionomer systems to tooth structure : in vitro studies", Oper Dent, 40, pp.304~312 (2015)
- Nakanuma K, "Effect of the application of dentin primers and a dentin bonding agent on the adhesion between the resin-modified glass-ionomer cement and dentin", Dent Mater, 14, pp.281~286 (1998)
- Pashley DH, "Smear layer : overview of structure and function", Proc Finn Dent Soc, 88(Supplement 1), pp.215~224 (1992)
- Abdalla AI, "Morphological interface between hybrid ionomers and dentin with and without smear-layer removal", J Oral Rehabil, 27, pp.808~814 (2000)
- Coutinho E, "Gel phase formation at resin-modified glass-ionomer", tooth interfaces, 2007, pp.86, 656~661
- Yiu CK, "Interaction of resin-modified glass-ionomer cements with moist dentine", J Dent, 32, pp.521~530 (2004)
- Marquezan M, "Differential bonds degradation of two resin-modified glass-ionomer cements in primary and permanent teeth", J Dent, 37, pp.857~864 (2009)
- Yoshida Y, "Comparative study on adhesive performance of functional monomers", J Dent Res, 83, pp.454~458 (2004)