3-leg 랜딩 시스템 기반 쿼드콥터의 험지 착륙 기법
Rough Terrain Landing Technique of Quadcopter Based on 3-Leg Landing System
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, we propose an intelligent three-legged landing system that can maintain stability and level even on rough terrain than conventional four-legged landing systems. Conventional landing gear has the limitation that it requires flat terrain for landing. The 3-leg landing system proposed in this paper extends the usable range of the legs and reduces the weight, allowing the quadcopter to operate in various environments. To do this, kinematics determine the joint angles and coordinates of the legs of the two-link structure. Based on the angle value of the quadcopter detected via the IMU sensor, the leg control method that corrects the posture is determined. A force sensor attached to the end of the leg is used to detect contact with the ground. At the moment of contact with the ground, landing control starts according to the value of the IMU sensor. The proposed system verifies its reliability in various environments through an indoor landing test stand. Finally, in an outdoor environment, the quadcopter lands on a 20 degree incline and 20 cm rough terrain after flight. This demonstrates the stability and effectiveness of the 3-leg landing system even on rough terrain compared to the 4-leg landing system.
Abstract
In this paper, we propose an intelligent three-legged landing system that can maintain stability and level even on rough terrain than conventional four-legged landing systems. Conventional landing gear has the limitation that it requires flat terrain for landing. The 3-leg landing system proposed in this paper extends the usable range of the legs and reduces the weight, allowing the quadcopter to operate in various environments. To do this, kinematics determine the joint angles and coordinates of the legs of the two-link structure. Based on the angle value of the quadcopter detected via the IMU sensor, the leg control method that corrects the posture is determined. A force sensor attached to the end of the leg is used to detect contact with the ground. At the moment of contact with the ground, landing control starts according to the value of the IMU sensor. The proposed system verifies its reliability in various environments through an indoor landing test stand. Finally, in an outdoor environment, the quadcopter lands on a 20 degree incline and 20 cm rough terrain after flight. This demonstrates the stability and effectiveness of the 3-leg landing system even on rough terrain compared to the 4-leg landing system.
참고문헌 (23)
- C. Y. Ju, "Multiple UAV systems for agricultural applications : control, implementation, and evaluation", Electronics, 7(9) (2018)[DOI]
- D. Y. Shin, "Construction and drone technologies", Journal of The Korean Society of Civil Engineers, 68(1), pp.28~39 (2020)
- 김성환, "무인 배송용 드론 설계 및 시험비행", 제어.로봇.시스템학회 논문지, 22(3), pp.204~209 (2016), 제어·로봇·시스템학회[DOI]
- C. H. Joe, "Exploring trends and technologies in drone development", Communications of the Korean Institute of Information Scientists and Engineers, 37(1), pp.10~19 (2019)
- 고하윤, "전역 및 지역 경로 생성을 통한 무인항공기 자율비행 시스템 연구", 항공우주시스템공학회지, 13(3), pp.15~22 (2019), 항공우주시스템공학회[DOI]
- 최지욱, "드론의 자동 랜딩을 위한 CNN을 이용한 객체인식", 전자공학회논문지, 56(5), pp.82~90 (2019), 대한전자공학회
- 박성관, "PPO 기반 강화학습을 이용한 드론의 자율비행", 제어.로봇.시스템학회 논문지, 26(11), pp.955~963 (2020), 제어·로봇·시스템학회[DOI]
- 김영민, "피드백 선형화를 이용한 쿼드로터의 자이로 효과 제어", 로봇학회 논문지, 15(3), pp.248~255 (2020), 한국로봇학회[DOI]
- "Phantom 4 Pro V2.0"[URL]
- "Slope landing compensator system, US-0765196" (1977)[URL]
- "Helicopter self-leveling landing gear, US3857533A" (1974)[URL]
- 이덕진, "Autonomous Unmanned Flying Robot Control for Reconfigurable Airborne Wireless Sensor Networks Using Adaptive Gradient Climbing Algorithm", 로봇학회 논문지, 6(2), pp.97~107 (2011), 한국로봇학회
- S. Baker, "Passive landing gear using coupled mechanical design", Australasian Conference on Robotics and Automation, pp.1~8 (2013)
- Y. S. Sarkisov, "Dronegear : A novel robotic landing gear with embedded optical torque sensors for safe multicopter landing on an uneven surface", IEEE Robotics and Automation Letters, 3(3), pp.1912~1917 (2018)[DOI]
- 이상웅, "무인항공기 이착륙을 위한 수평 유지 이동 플랫폼", 한국기계가공학회지, 19(4), pp.85~92 (2020), 한국기계가공학회
- J. Bass, "Improving multirotor landing performance on inclined surfaces using reverse thrust", IEEE Robotics and Automation Letters, 5(4), pp.5850~5857 (2020)[DOI]
- 천동훈, "쿼드콥터의 험지 착륙을 위한 적응형 랜딩 시스템 연구", 제어.로봇.시스템학회 논문지, 27(3), pp.247~254 (2021), 제어·로봇·시스템학회[DOI]
- Jiwook Choi, "Robust Landing Control of a Quadcopter on a Slanted Surface", International Journal of Precision Engineering and Manufacturing, 22(6), pp.1147~1156 (2021), 한국정밀공학회[DOI]
- 정성욱, "무인 항공기의 이동체 상부로의 영상 기반 자동 착륙 시스템", 로봇학회 논문지, 11(4), pp.262~269 (2016), 한국로봇학회
- S. Muslimin, "Inverse kinematics analysis for motion prediction of a hexapod robot", 2018 International Conference on Applied Engineering (ICAE) (2018)
- H. S. Jung, "Posture control of quadruped robot using gyroscope", The Korean Institute of Electrical Engineers Conference (2010)
- R. Jia, "Terrain-adaptive bionic landing gear system design for multi-rotor UAVs", 2019Chinese Control And Decision Conference (CCDC) (2019)
- "Ardupilot"[URL]