내진성능 향상을 위한 고성능 철근콘크리트 말뚝 설계에 관한 연구
Design of High Performance Reinforced Concrete Pile for Improvement of Seismic Performance
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Recent changes in the construction method of piles to minimize noise, along with the development of high-strength reinforcement, have provided an economical high performance RC pile development to compensate for the disadvantages of existing PHC piles. In this study, a methodology for the development of cross - section details of high performance RC piles of various performances is presented by freely applying high strength steel and concrete. This study suggested a technique for calculating bending moments for a given axial force corresponding to the allowable crack widths and this can be used for serviceablity check. In calculating the design shear force, the existing design equation applicable to the rectangular or the I section was modified to be applicable to the hollow circular section. In particular, in the limit state design method, the shear force is calculated in proportion to the axial force, and the procedure for calculating PV diagram is established. Last, the section details are determined through PM diagrams that they have the similar flexural and axial-flexural performances of the PHC pile A, B and C types with a diameter of 500 mm. To facilitate the application of the selected standard sections to the practical tasks, the design PM diagram and design shear forces are proposed in accordance with the strength design method and limit state design method.
Abstract
Recent changes in the construction method of piles to minimize noise, along with the development of high-strength reinforcement, have provided an economical high performance RC pile development to compensate for the disadvantages of existing PHC piles. In this study, a methodology for the development of cross - section details of high performance RC piles of various performances is presented by freely applying high strength steel and concrete. This study suggested a technique for calculating bending moments for a given axial force corresponding to the allowable crack widths and this can be used for serviceablity check. In calculating the design shear force, the existing design equation applicable to the rectangular or the I section was modified to be applicable to the hollow circular section. In particular, in the limit state design method, the shear force is calculated in proportion to the axial force, and the procedure for calculating PV diagram is established. Last, the section details are determined through PM diagrams that they have the similar flexural and axial-flexural performances of the PHC pile A, B and C types with a diameter of 500 mm. To facilitate the application of the selected standard sections to the practical tasks, the design PM diagram and design shear forces are proposed in accordance with the strength design method and limit state design method.
참고문헌 (18)
- Cho CH, "Pile Engineering Practice" (2010), E&G book
- 현정환, "내부충전 콘크리트와 전단철근을 이용한 중공 PHC말뚝의 전단보강 효과", 콘크리트학회 논문집, 24(1), pp.71~78 (2012), 한국콘크리트학회
- 방진욱, "내부충전 콘크리트와 횡보강 및 축방향 철근으로 보강된 PHC 말뚝의 휨강도", 콘크리트학회 논문집, 25(1), pp.91~98 (2013), 한국콘크리트학회[DOI]
- 김정회, "철근 콘크리트 충전 PHC말뚝의 휨 설계 및 성능 평가", 콘크리트학회 논문집, 29(4), pp.353~360 (2017), 한국콘크리트학회
- Fam A, "Precast piles for Route 40bridge in Virginia using concrete filled FRP tubes", PCI journal, 48(3), pp.32~45 (2003)
- Akiyama M, "Flexural test of precast high-strength reinforced concrete pile prestressed with unbonded bars arranged at the center of the cross-section", Engineering Structures, 34, pp.259~270 (2012)
- Development of High Performance RC Pile, "Korea Expressway Corporation", ~ (2017)
- A study on design and construction of High Performance Reinforced Concrete Pile, "Korea Institute of Civil Engineering and Building Technology", ~ (2018)
- Ministry of Land, Infrastructur and Transport, "KDS 24 14 21 : 2016. Design Specifications of Concrete Bridge (Limit State Design)", ~ (2016)
- ECf S., "Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for building(EN 1992-1-1:2004)", ~ (2004)
- Ministry of Land, Infrastructur and Transport, "KDS 14 20 22 : 2016. Design Specifications of Shear and Torsion for Concrete Strucutre", ~ (2016)
- Korean Standard Association, "KS F 4306 : 2003 (2014 Reapproved). Pretensioned Spun High Strength Concrete Piles", ~ (2014)
- Korean Standard Association, "KS D 3505 : 2002. Steel Bars for Prestressed Concrete", ~ (2002)
- Korean Standard Association, "KS D 3504 : 2016. Steel Bars for Concrete Reinforcement", ~ (2016)
- Korean Standard Association, "KS F 4301 : 2016. Reinforced Spun Concrete Piles 2016", ~ (2016)
- AASHTO L., "SI-2007. AASHTO LRFD Bridge Design Specifications", ~ (2007)
- Ministry of Land, Infrastructur and Transport, "KDS 14 20 50 : 2016. Design Specifications of Steel Reinforcement Details for Concrete Strucutre", ~ (2016)
- ACI A., "318-14. Building Code Requirements for Structural Concrete, American Concrete Institute", ~ (2014)