복합센서를 이용한 온도상승에 따른 배터리 폭발에 관한 실험 연구
A study on Explosion of Batteries on Increasing Temperature by using Complex Sensors
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, the explosion processes of the battery according to by heating was identified using complex sensors including temperature, infrared (IR), visible, and ultraviolet (UV) sensors. A safe chamber was prepared for the explosion of the batteries according to heating. In order to detect signals from the battery during heating, complex sensors including temperature, IR, visible, and UV sensors were used inside the safe chamber. The heating was increased from room temperature to 165℃ at 10℃/min and then, kept 165℃. During the heating was kept at 165℃, the battery was exploded and a temperature was increased up to 380℃ abruptly due to explosion of the battery. Before the battery was exploded, the signals of the sensors were not detected. However, during explosion of the battery, the signals of IR, visible, and UV sensors were strongly detected. By analyzing various signals of the these sensors, the explosion of the battery according to heating was investigated.
Abstract
In this study, the explosion processes of the battery according to by heating was identified using complex sensors including temperature, infrared (IR), visible, and ultraviolet (UV) sensors. A safe chamber was prepared for the explosion of the batteries according to heating. In order to detect signals from the battery during heating, complex sensors including temperature, IR, visible, and UV sensors were used inside the safe chamber. The heating was increased from room temperature to 165℃ at 10℃/min and then, kept 165℃. During the heating was kept at 165℃, the battery was exploded and a temperature was increased up to 380℃ abruptly due to explosion of the battery. Before the battery was exploded, the signals of the sensors were not detected. However, during explosion of the battery, the signals of IR, visible, and UV sensors were strongly detected. By analyzing various signals of the these sensors, the explosion of the battery according to heating was investigated.
참고문헌 (10)
- M. Henriksen, "Explosion Characteristics for Li-ion battery electrolytes at elevated temperatures", Journal of Hazardous Materials, 371, pp.1~7 (2019)
- S. C. Nagpure, "Scanning spreading resistance characterization of aged Li-ion batteries using atomic force microscopy", Scripta Materialia, 60, pp.933~936 (2009)
- Y. K. Han, "Computational screening of phosphite derivatives as high-performance additives in high-voltage Li-ion batteries", RSC Advances, 7, pp.20049~20056 (2017)
- P. G. Balakrishman, "Safety mechanisms in lithium-ion batteries", Journal of Power Sources, 155, pp.401~414 (2006)
- J. Wang, "Fire-extinguishing organic electrolytes for safe batteries", Nature Energy, 3, pp.22~29 (2018)
- A. Hofmann, "Preventing Li-ion cell explosion during thermal runaway with reduced pressure", Applied Thermal Engineering, 124, pp.539~544 (2017)
- A. R. Baird, "Explosion hazards from lithium-ion battery vent gas", Journal of Power Sources, 446, pp.227257~ (2020)
- Q. Wang, "Thermal behavior of lithiated graphite with electrolyte in lithium-ion batteries", Journal of the Electr℃hemical S℃iety, 153, pp.A329~A333 (2006)
- Q. Wang, "Thermal runaway caused fire and explosion of lithium ion battery", Journal of Power Sources, 208, pp.210~224 (2012)
- F. Jiang, "Theoretical analysis of lithium-ion battery failure characteristics under different states of charge", Fire and Materials, 42, pp.680~686