운항조건에서 11,000TEU 컨테이너선의 소요마력 저감을 위한 트림변화 연구
A Study on Trim Variation to Reduce the Required Power of 11,000TEU Container Ship in Operation Condition
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this paper, the effect of trim variation on the required power of 11,000TEU container ship was investigated under conditions considering the actual operation speed and draft. For each draft condition, the effective power (PE) and delivered power (PD) trends were investigated with changes in trim and ship speed. At this time, the displacement volume was fixed same as the value of the even trim condition and the both sinkage at the fore and after perpendicular are confirmed. The test ship speeds were determined by considering the operating speed. Both numerical and experimental methods were used to analyze the effects of trim variation. Numerical analysis results were used for evaluating the resistance performance, and the self-propulsion performance was estimated using experimental data obtained from model test.
Abstract
In this paper, the effect of trim variation on the required power of 11,000TEU container ship was investigated under conditions considering the actual operation speed and draft. For each draft condition, the effective power (PE) and delivered power (PD) trends were investigated with changes in trim and ship speed. At this time, the displacement volume was fixed same as the value of the even trim condition and the both sinkage at the fore and after perpendicular are confirmed. The test ship speeds were determined by considering the operating speed. Both numerical and experimental methods were used to analyze the effects of trim variation. Numerical analysis results were used for evaluating the resistance performance, and the self-propulsion performance was estimated using experimental data obtained from model test.
참고문헌 (19)
- Alexandrina, V, "Study of the Effect of Trim on Ship Powering Performance", XXIII International Scientific -technical Conference, trans & MOTAUTO'15 proceedings, pp.151~154 (2015)
- Carlton, J, "Marine propeller and propulsion", pp.137~138 (2018), Butterworth—Heinemann
- Gao, X, "Research on Influence of Trim on a Container Ship’s Resistance performance", 3rd International Conference on Fluid Mechanics and Industrial Applications(FMIA 2019) (2019)
- GloMEEP, "Ship Emissions Toolkit, Guide No.3:Development of a national ship emissions reduction strategy, GEF-UNDP-IMO GloMEEP Project and IMarEST", ~ (2018)
- 한기민, "트림 변화에 따른 컨테이너선의 저항성분별 특성 연구", 한국해양공학회지, 29(6), pp.411~417 (2015), 한국해양공학회
- akovatos, M.N, "Developments in Maritime Transportation and Exploitation of Sea Resources", pp.23~32 (2013)
- IMO, "Reduction of GHG emissions from ships, fourth", ~ (2020)
- IMO, "GHG study 2020 final report, MEPC 75", 7, ~
- IMO, "Report of the marine environment protection committee on its seventy-fifth session, MEPC 75", 18, 2020
- Islam, H, "Effect of trim on container ship resistance at different ship speeds and drafts", Ocean Engineering, 183, pp.106~115 (2019)
- Joung, T. H, "The IMO initial strategy for reducing Greenhouse Gas(GHG) emissions, and its follow-up actions towards 2050", Journal of International Maritime Safety, Environmental Affairs, and Shipping, 4(1), pp.1~7 (2020)
- Kim, I. C, "A study on trim optimization by using CFD analysis", Special Issue of the Society of Naval Architects of Korea, pp.41~45 (2015)
- Kishev, R, "Global view on ship trim optimization", Alkan, A.D., 2nd International Symposium on Naval Architecture and Maritime Proceedings (INT-NAM 2014), pp.223~234 (2014)
- Liarokapis, D.E, "Experimental investigation of the trim influence on the resistance characteristics of a passenger ship model", The 5th International Conference on Advanced Model Measurement Technology for the Maritime Industry (AMT’17) (2017)
- 박동우, "선박의 트림 자세가 저항 성능에 미치는 영향", 대한조선학회 논문집, 50(2), pp.88~94 (2013), 대한조선학회
- Paik, K.J, "Numerical study on the performance of a partially submerged propeller in bollard condition", Fifth International Symposium on Marine Propulsors (SMP’17), pp.723~730 (2017)
- 박상훈, "CFD 저항 해석을 이용한 컨테이너선 최적 트림추정법에 대한 연구", 대한조선학회 논문집, 51(5), pp.429~434 (2014), 대한조선학회
- 서대원, "CFD를 이용한 컨테이너 선형의 트림별 저항성능 해석", 한국해양공학회지, 29(3), pp.224~230 (2015), 한국해양공학회
- Sogihara, N, "Investigation on trim optimization to enhance the propulsive performance of fine ships", Journal of the Japan Society of Naval Architects and Ocean Engineers, 27, pp.15~22 (2018)