TiZrN 코팅의 레이저 침탄에서 탄소 포텐셜에 따른 침입 거동
Penetration behavior by carbon potential in laser-carburized TiZrN coatings
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Laser-carburized TiZrN 코팅의 침탄 공정에서 탄소 페이스트 두께에 따른 탄소의 침투 깊이 및 압축잔류응력 변화를 탄소 포텐셜 측면으로 비교∙고찰하였다. 스크린 프린팅과 스핀 코팅 방법을 이용하여 각각 1.1mm와 0.4mm의 두께로 탄소 페이스트를 도포하고, 동일한 레이저 조사 조건에서 레이저 침탄을 실시하였다. 탄소 페이스트가 두꺼워질수록 침탄된 TiZrN 시료의 회절 패턴이 더 저각으로 이동하였으며, 고용체 강화 및 격자 왜곡의 심화를 나타내었다. TEM을 이용한 미세구조 분석에서도 두꺼운 페이스트로부터 침탄된 TiZrN 내 결정질 결함이 증가하고 높은 탄소 농도를 보였으며, 이는 페이스트 두께가 두꺼워질수록 탄소 포텐셜도 높아짐을 의미하였다. XPS depth profile 분석에서도 두꺼운 페이스트를 통해 침탄된 TiZrN 시료에서 높은 탄소 농도 및 탄화물 형성을 보이면서, 탄소 페이스트 두께 조절에 의해 침탄에서 표면 탄소 농도와 탄소 포텐셜 증가가 일어남을 나타내었다. 아울러, 탄소 농도의 증가는 표면의 압축잔류응력 증가(3.67 GPa에서 4.58 GPa로)에 기여하였음을 확인하였다.
Abstract
Penetration depth and compressive residual stress of laser-carburized TiZrN coating by thickness of carbon paste were investigated in terms of carbon potential. The carbon paste was covered with a thickness of 1.1 mm using screenprinting, and applied to a thickness of 0.4 mm using spin coating, and laser carburization was performed under the same conditions. As the thickness of carbon paste increased, the diffraction pattern of the laser-carburized TiZrN coating shifted to a lower angle, indicating solid solution strengthening and lattice distortion. For microstructure analysis using TEM, the defects and carbon concentration of the laser-carburized TiZrN coating increased as the carbon paste was thicker. It indicated that the variation of the carbon potential corresponds to the change in the paste thickness. In XPS depth profile analysis, highconcentration of carbon and formation of carbide were observed in laser-carburized TiZrN coating with thick carbon paste. It revealed that the carbon concentration on the surface and carbon potential were changed by the thickness control of carbon paste. The compressive residual stress increased from 3.67 GPa to 4.58 GPa by the variation of carbon concentration.
참고문헌 (26)
- E. Santecchia, "Wear resistance investigation of titanium nitride-based coatings", Cerm. Int, 41, pp.10349~ (2015)
- S. Datta, "Mechanical, wear, corrosion and biological properties of arc deposited titanium nitride coatings", Surf. Coat. Technol, 344, pp.214~ (2018)
- C. A. Escobar, "Corrosion resistant surface for vanadium nitride and hafnium nitride layers as function of grain size", J. Phys. Chem. Solids, 75, pp.23~ (2014)
- 최병수, "TiZrN 박막의 조성이 구조적 특성 및 열적 특성에 미치는 영향", 한국결정성장학회지, 31(1), pp.37~42 (2021), 한국결정성장학회[DOI]
- 조현, "표면 처리에 따른 Inconel 617 합금의 고온 특성", 한국결정성장학회지, 19(6), pp.298~304 (2009), 한국결정성장학회
- 이병우, "TiCrN 코팅이 Inconel 617 합금의 고온안정성에 미치는 영향", 한국결정성장학회지, 21(6), pp.235~239 (2011), 한국결정성장학회
- V.S. Sundaram, "Diamond like carbon film as a protective coating for high strength steel and titanium alloy", Surf. Coat. Technol, 201, pp.2707~ (2006)
- E. L. Dalibon, "Wear resistance of nitrided and DLC coated PH stainless steel", Surf. Coat. Technol, 255, pp.22~ (2014)
- M. Ebrahimi, "Wear behavior of DLC film on plasma nitrocarburized AISI 4140 steel by pulsed DC PACVD : effect of nitrocarburizing temperature", Diam Relat Mater, 52, pp.32~ (2015)
- M. T. Hernández-Sierra, "Tribological performance of TiN and TiCN coatings on a working tool steel", Journal of Mechanical Science and Technology, 32(8), pp.3659~3666 (2018), 대한기계학회
- B. Courant, "Structure and hardness of titanium surfaces carburized by pulsed laser melting with graphite addition", J. Mater. Process. Technol, 160, pp.374~ (2005)
- A. F. Saleh, "Surface carburizing of Ti-6Al-4V alloy by laser melting", Opt. Lasers Eng, 48, pp.257~ (2010)
- 유현조, "레이저 침탄된 TiZrN 코팅에서 탄소확산거동과 기계적 특성", 한국결정성장학회지, 31(1), pp.32~36 (2021), 한국결정성장학회[DOI]
- J. Yao, "Microstructure and wear property of carbon nanotube carburizing carbon steel by laser surface remelting", Appl. Surf. Sci, 254, pp.7092~ (2008)
- I. A. Bataev, "Non-vacuum electron-beam carburizing and surface hardening of mild steel", Appl. Surf. Sci, 322, pp.6~ (2014)
- H. C. Man, "Adhesion study of pulsed laser deposited hydroxyapatite coating on laser surface nitrided titanium", Thin Solid Films, 517, pp.5496~ (2009)
- I. Campos, "Effect of boron paste thickness on the growth kinetics of Fe2B boride layers during the boriding process", Appl. Surf. Sci, 243, pp.429~ (2005)
- 이성철, "레이저 침탄에서 페이스트 증착방식에 따른 TiZrN 코팅의 carbon solid solubility", 한국결정성장학회지, 30(1), pp.7~11 (2020), 한국결정성장학회[DOI]
- Z. Li, "Designing superhard, self-toughening CrAlN coatings through grain boundary engineering", Acta Mater, 60, pp.5735~ (2012)
- J. Dean, "Use of nanoindentation to measure residual stresses in surface layers", Acta Materialia, 59, pp.2749~ (2011)
- T. Kim, "Test method for degradation of TiZrN coatings on metal substrate using electrical resistance measurement", Cerm. Int, 45, pp.22368~ (2019)
- Y. W. Lin, "Effect of bias on the structure and properties of TiZrN thin films deposited by unbalanced magnetron sputtering", Thin Solid Films, 618, pp.13~ (2016)
- Y. K. Choi, "Crack propagation behavior of TiN coatings by laser thermal shock experiments", Appl. Surf. Sci, 258, pp.8752~ (2012)
- O. K. Rowan, "Effect of alloy composition on carburizing performance of steel", J. Phase Equilibria Diffus, 30, pp.235~ (2009)
- K. Bouamama, "Structural and elastic properties of single-crystal and polycrystalline Ti1xZrxN alloys: A computational study", J. Alloys Compd, 536, pp.S138~ (2012)
- Y. W. Lin, "Effect of Ti interlayer thickness on mechanical properties and wear resistance of TiZrN coatings on AISI D2 steel", Surf. Coat. Technol, 394, pp.125690~ (2020)