레이저 침탄에서 페이스트 증착방식에 따른 TiZrN 코팅의 carbon solid solubility
Solid solubility of carbon in TiZrN coating by paste deposition methods for laser carburization
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
TiZrN 코팅의 도핑 공정에서 탄소 페이스트 증착 방식에 따른 탄소의 용해성 변화를 격자왜곡(lattice distortion) 과 원자농도(atomic concentration)를 통해 비교 및 고찰하였다. 딥코팅, 스핀코팅과 스크린프린팅 방식을 이용하여 탄소 페이스트를 도포한 후, 레이저를 조사하여 탄소 구배층(carbon gradient layer)을 형성시켰다. 모든 구배층은 탄소가 도핑되는구조였으며, 두께 및 탄소 도핑량은 페이스트 도포 방식에 의존하였다. 결정 구조 분석 결과, 딥코팅에 의해 코팅층을 도핑할 때 보다 스핀코팅과 스크린프린팅에 의해 코팅층을 도핑하였을 때, 더 큰 격자 팽창이 일어남을 확인할 수 있었다. 또한XPS depth profile을 통해 딥코팅에 의한 탄소 구배층 두께는 약 30 nm, 스핀코팅과 스크린프린팅의 경우 대략 100 nm로 더깊은 구배층이 형성됨을 확인하였다. 침탄 전 코팅의 경도는 약 30GPa였으며, 침탄 후에는 딥코팅 시편의 평균 경도가 약31 GPa였고 스핀코팅과 스크린프린팅의 평균 경도는 대략 37 GPa로 증가한 것으로 보아 탄소 도핑을 통한 격자팽창 및 구배층의 영향을 확인하였다.
Abstract
Carbon solubility on the paste deposition methods in the carbon-doped TiZrN coating was investigated in terms of lattice distortion and atomic concentration. After depositing the carbon paste by the dip coating, spin coating and screen printing, the laser was ablated to form the carbon gradient layer. Thickness and the concentration of doped carbon depended on the paste deposition method. Crystal structure analysis indicated that more lattice distortion occurred when coating layers were doped with spin coating and screen printing than when coating layers were doped with dip coating. The XPS depth profile showed that the thickness of carbon gradient layer by dip coating was about 30 nm, spin coating and screen printing are approximately 100 nm, formed more gradient layer. The hardness before laser carburization was about 30 GPa, and the hardness of 31 GPa with dip coating and 37 GPa with spin coating and screen printing. It was indicated that paste deposition methods for laser carburization contributed to lattice distortion and gradient layer.
참고문헌 (19)
- Y. Choi, "Crack propagation behavior of TiN coatings by laser thermal shock experiments", Appl. Surf. Sci, 258, pp.8752~ (2012)
- A. U. Chaudhry, "Corrosion mechanism in PVD deposited nano-scale titanium nitride thin film with intercalated titanium for protecting the surface of silicon", Electrochim. Acta, 264, pp.69~ (2018)
- G. Abadias, "Structure, phase stability and elastic properties in the Ti1xZrxN thin-film system : Experimental and computational studies", Acta Mater, 60, pp.5601~ (2012)
- M. Abdoos, "Effect of coating thickness on the tool wear performance of low stress TiAlN PVD coating during turning of compacted graphite iron(CGI)", Wear, 422, pp.128~ (2019)
- F. F. Klimashin, "Ab initio-guided development of super-hard Mo-Al-Cr-N coatings", Scr. Mater, 140, pp.27~ (2017)
- Y. Li, "TiBCN-ceramicreinforced Ti-based coating by laser cladding : Analysis of processing conditions and coating properties", Coat, 9, pp.407~ (2019)
- S. Jeon, "Influence of Carbon interstitials to Ti1xMexN(Me = Zr, Al, Cr)coatings by pulsed laser ablation on wear resistance", Appl. Surf. Sci, 443, pp.329~ (2018)
- E. Hong, "Atomic structure and residual stress of carbon-doped TiMeN(Me = Zr, Al, and Cr)coatings on mechanical properties", Ceram. Int, 45, pp.9192~ (2019)
- R. Jagdheesh, "Laser-induced nanoscale superhydrophobic structures on metal surfaces", Langmuir, 27, pp.8464~ (2011)
- M. S. Trtica, "Surface modifications of TiN coating by the pulsed TEA CO2 and KrCl laser", Appl. Surf. Sci, 225, pp.362~ (2004)
- Y. Danlos, "Influence of Ti-6Al-4V and Al 2017 substrate morphology on Ni-Al coating adhesion-Impacts of laser treatments", Surf. Coat. Technol, 205, pp.2702~ (2011)
- Y. Rong, "Toward industrial-scale production of perovskite solar cells : screen printing, slot-die coating, and emerging techniques", J. Phys. Chem. Lett, 9, pp.2707~ (2018)
- L.E. Scriven, "Physics and applications of dip coating and spin coating", Mater. Res. Soc. Symp. Proc, pp.121~ (1988)
- B. Denkena, "Cutting edge geometries", CIRP Annals, 63, pp.631~ (2014)
- X. Wang, "Tool wear of coated drills in drilling CFRP", J. Manuf. Process, 15, pp.127~ (2013)
- Landau LD, "Dragging of a liquid by a moving plate", Acta Phys. Chim. URSS, 17, pp.42~ (1942)
- C. J. Brinker, "Fundamentals of sol-gel dip coating", Thin Solid Films, 201, pp.97~ (1991)
- N. Sahu, "Fundamental understanding and modeling of spin coating process : A review", Indian J. Phys, 83, pp.493~ (2009)
- I.J. Fox, "Film thickness prediction in halftone screen-printing", Proceedings of the Institution of Mechanical Engineers, Part E:Proc. Inst. Mech. Eng. E, 217, pp.345~ (2003)