엔지니어링 플라스틱 PMMA의 광탄성 응력프린지 상수 측정
Photoelastic Material Stress Fringe Constant Measurement of Engineering Plastic PMMA
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Many polymers exhibits sufficient birefringence to be used as photoelastic specimen material. Common polymers as polymethylmethacrylate (PMMA) are often used as photoelastic specimen. In a photoelastic experiment, it is necessary to know the material fringe constant of the photoelastic specimen to determine the stresses from the measured isochromatic fringe orders. The material stress fringe constant is determined using the simple tension specimen. The stress fringe constant measured with this method is applied to obtain the stress distribution in a tensile plate with a circular hole. Photoelastic results using the measured material fringe constant are compared with FEM analysis. Two results are comparable, so it can be seen for the measured material fringe constant to be valid.
Abstract
Many polymers exhibits sufficient birefringence to be used as photoelastic specimen material. Common polymers as polymethylmethacrylate (PMMA) are often used as photoelastic specimen. In a photoelastic experiment, it is necessary to know the material fringe constant of the photoelastic specimen to determine the stresses from the measured isochromatic fringe orders. The material stress fringe constant is determined using the simple tension specimen. The stress fringe constant measured with this method is applied to obtain the stress distribution in a tensile plate with a circular hole. Photoelastic results using the measured material fringe constant are compared with FEM analysis. Two results are comparable, so it can be seen for the measured material fringe constant to be valid.
참고문헌 (8)
- J. W. Dally, "Experimental Stress Analysis", pp.457~459 (1978), McGraw-Hill Book Company
- G. L. Cloud, "Optical Methods of Engineering Analysis", pp.57~146 (1995), Cambridge University Press
- 마정범, "박막의 기계적 물성해석을 위한 계층적 모델링과 미세구조분석을 통한 온도분포", 한국기계기술학회지, 12(1), pp.1~7 (2010), 한국기계기술학회
- 손홍붕, "자동차 시트 리크라이너들의 강도 특성 비교에 관한 연구", 한국기계기술학회지, 15(6), pp.887~892 (2013), 한국기계기술학회
- T. H. Baek, "Photoelastic Fringe Analysis for Accurate Stress Measurement", Journal of Korean Society for Precision Engineering, 24(3), pp.31~39 (2007)
- W. D. Pilkey, "Peterson's Stress Concentration Factors", pp.150~256 (1997), John Wiley & Sons Inc