메타카올린 및 실리카퓸 첨가율에 따른 구조용 PVA 섬유와 시멘트 복합재료의 부착특성
Bond Properties of Structural Poly Vinyl Alcohol Fiber in Cement Based Composites with Metakaolin and Silica Fume Contents
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, the effect of metakaoline and silica fume on the bond performances of structural polyvinyl alcohol (PVA) fiber in cement mortar, including bond strength, interface toughness, and microstructure analysis are presented. Metakaoline and silica fume contents ranging from 0 % to 15 % are used in the mix proportions. Pullout tests are conducted to measure the bond performance of PVA fiber from cement mortar. Test results showed the incorporation of metakaoline and silica fume can effectively enhance the PVA fiber–cement mortar interfacial properties. Bond strength and interface toughness increased with metakaoline and silica fume content up to 10 % in cement mortar and decreased when the metakaoline and silica fume content reached 15 %. The microstructural observation confirms the findings on the interface bond mechanism drawn from the fiber pullout test results.
Abstract
In this study, the effect of metakaoline and silica fume on the bond performances of structural polyvinyl alcohol (PVA) fiber in cement mortar, including bond strength, interface toughness, and microstructure analysis are presented. Metakaoline and silica fume contents ranging from 0 % to 15 % are used in the mix proportions. Pullout tests are conducted to measure the bond performance of PVA fiber from cement mortar. Test results showed the incorporation of metakaoline and silica fume can effectively enhance the PVA fiber–cement mortar interfacial properties. Bond strength and interface toughness increased with metakaoline and silica fume content up to 10 % in cement mortar and decreased when the metakaoline and silica fume content reached 15 %. The microstructural observation confirms the findings on the interface bond mechanism drawn from the fiber pullout test results.
참고문헌 (15)
- Chan, Y. W., "Effect of silica fume on steel fiber bond characteristics in reactive powder concrete", Cement and Concrete Research, 34(7), pp.1167~1172 (2004)
- Kim, J. H., "Effects of the geometry recycled PET fiber reinforcement on shrinkage of cement-based composites", Composites Part B: Engineering, 39(3), pp.442~450 (2008)
- "Kuraray structural fibers for concrete reinforcement"[URL]
- 이진형, "하이브리드섬유보강 시멘트 복합재료에서 구조용 합성섬유의 인발거동에 미치는 폴리비닐알코올섬유 혼입률의 효과", 콘크리트학회 논문집, 23(4), pp.461~469 (2011), 한국콘크리트학회
- 이진형, "폴리올레핀계 합성 섬유와 시멘트 모르타르와의 부착 특성에 미치는 광물질 혼화재의 효과", 콘크리트학회 논문집, 23(3), pp.339~346 (2011), 한국콘크리트학회
- Li, V. C., "Interface property characterization and strengthening mechanisms in fiber reinforced cement based composites", Advanced Cement Based Materials, 6(1), pp.1~20 (1997)
- Mobasher, B., "Effect of interfacial properties on the crack propagation in cementitious composites", Advanced Cement Based Materials, 4(3), pp.93~105 (1996)
- Naaman A. E., "Bond-slip mechanism of steel fibres in concrete", ACI Materials Journal, 88(2), pp.135~145 (1991)
- 박승범, "고로슬래그 미분말이 혼입된 자기충전 및 숏크리트용 ECC의 개발을 위한 시멘트풀 레올로지 제어", 콘크리트학회 논문집, 20(1), pp.67~75 (2008), 한국콘크리트학회
- 박조범, "실리카 퓸과 메타카올린을 사용한 다성분계 고강도 콘크리트의 특성", 콘크리트학회 논문집, 20(3), pp.307~315 (2008), 한국콘크리트학회
- Shannag, M. J., "Pullout behavior of steel fibers from cement-based composites", Cement and Concrete Research, 27(6), pp.925~936 (1997)
- Sehaj Singha, "Pullout behavior of polypropylene fibers fromcementitious matrix", Cement and Concrete Research, 34(10), pp.1919~1925 (2004)
- Won, J. P., "Bond behavior and flexural performance ofstructural synthetic fibre reinforced concrete", Magazineof concrete research, 28(6), pp.401~410 (2006)
- 원종필, "화학적 친수성 처리율에 따른 재생 PET섬유와 시멘트 복합재료와의 계면인발 특성", 콘크리트학회 논문집, 19(3), pp.333~339 (2007), 한국콘크리트학회
- Wu, H. C., "Fiber cement interface tailoring with plasma treatment", Cement and Concrete Composites, 21(3), pp.205~212 (1999)