변형각의 측정 위치에 따른 6인치 탄소강관엘보의 파괴기준
Failure Criteria of a 6-Inch Carbon Steel Pipe Elbow According to Deformation Angle Measurement Positions
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study proposes a low-cycle fatigue life derived from measurement points on pipe elbows, which are components that are vulnerable to seismic load in the interface piping systems of nuclear power plants that use seismic isolation systems. In order to quantitatively define limit states regarding leakage, i.e., actual failure caused by low-cycle fatigue, in-plane cyclic loading tests were performed using a sine wave of constant amplitude. The test specimens consisted of SCH40 6-inch carbon steel pipe elbows and straight pipes, and an image processing method was used to measure the nonlinear behavior of the test specimens. The leakage lines caused by low-cycle fatigue and the low-cycle fatigue curves were compared and analyzed using the relationship between the relative deformation angles, which were measured based on each of the measurement points on the straight pipe, and the moment, which was measured at the center of the pipe elbow. Damage indices based on the combination of ductility and dissipation energy at each measurement point were used to quantitatively express the time at which leakage occurs due to through-wall cracking in the pipe elbow.
Abstract
This study proposes a low-cycle fatigue life derived from measurement points on pipe elbows, which are components that are vulnerable to seismic load in the interface piping systems of nuclear power plants that use seismic isolation systems. In order to quantitatively define limit states regarding leakage, i.e., actual failure caused by low-cycle fatigue, in-plane cyclic loading tests were performed using a sine wave of constant amplitude. The test specimens consisted of SCH40 6-inch carbon steel pipe elbows and straight pipes, and an image processing method was used to measure the nonlinear behavior of the test specimens. The leakage lines caused by low-cycle fatigue and the low-cycle fatigue curves were compared and analyzed using the relationship between the relative deformation angles, which were measured based on each of the measurement points on the straight pipe, and the moment, which was measured at the center of the pipe elbow. Damage indices based on the combination of ductility and dissipation energy at each measurement point were used to quantitatively express the time at which leakage occurs due to through-wall cracking in the pipe elbow.
참고문헌 (19)
- Kammerer AM, "Technical considerations for seismic isolation of nuclear facilities", United States Nuclear Regulatory Commission, ~ (2014)
- 정진환, "다지점 진동대를 이용한 원자력발전소 배관계통의 내진 성능실험", 한국지진공학회논문집, 17(1), pp.21~31 (2013), 한국지진공학회
- 함대기, "면진 원전 면진-비면진구간 연결 배관의 내진성능 평가", 한국지진공학회논문집, 18(3), pp.141~150 (2014), 한국지진공학회
- Vishnuvardhan S, "Ratcheting failure of pressurized straight pipes and elbows under reversed bending", International Journal of Pressure Vessels and Piping, 105-106, pp.79~89 (2013)
- Hassan T, "Low-cycle fatigue and ratcheting responses of elbow piping components", Journal of Pressure Vessel Technology, 137(3), pp.031010~ (2015)
- Ravi Kiran A, "Risk-based seismic performance assessment of pressurized piping systems considering ratcheting", Journal of Pressure Vessel Technology, 142(2), pp.021902~ (2020)
- Salimi Firoozabad E, "Failure criterion for steel pipe elbows under cyclic loading", Engineering Failure Analysis, 66, pp.515~525 (2016)
- Salimi Firoozabad E, "Seismic fragility of APR1400 main steam piping system", Proceedings of 13th International Conference on Probabilistic Safety Assessment and Management (2016), PSAM
- 김성완, "Seismic Fragility Evaluation of the Base-isolated Nuclear Power Plant Piping System Using the Failure Criterion Based on Stress-strain", Nuclear Engineering and Technology, 51(2), pp.561~572 (2019), 한국원자력학회[DOI]
- 전법규, "지진격리된 원전배관의 지진취약도 분석", 한국지진공학회논문집, 19(1), pp.29~36 (2015), 한국지진공학회
- Ju BS, "Seismic fragility of threaded Tee-joint connections in piping systems", International Journal of Pressure Vessels and Piping, 132-133, pp.106~118 (2015)
- Takahashi K, "Low cycle fatigue behaviors of elbow pipe with local wall thinning", Nuclear Engineering and Design, 239(12), pp.2719~2727 (2009)
- Urabe Y, "Low cycle fatigue behavior and seismic assessment for elbow pipe having local wall thinning", Journal of Pressure Vessel Technology, 134(4), pp.041801~ (2012)
- 김성완, "이미지 신호를 이용한 원자력발전소 강재배관 Tee의 저주기 피로 거동", 한국구조물진단유지관리공학회 논문집, 23(6), pp.77~83 (2019), 한국구조물진단유지관리공학회
- 김성완, "모멘트-변형각의 관계를 이용한 SCH80 3인치 강재배관엘보의 한계상태 평가", 한국구조물진단유지관리공학회 논문집, 24(3), pp.122~129 (2020), 한국구조물진단유지관리공학회
- Banon H, "Seismic damage in reinforced concrete frames", Journal of the Structural division, 107(9), pp.1713~1729 (1981)
- 전법규, "A Failure Estimation Method of Steel Pipe Elbows under In-Plane Cyclic Loading", Nuclear Engineering and Technology, 49(1), pp.245~253 (2017), 한국원자력학회
- Kim SW, "Failure criteria of a carbon steel pipe elbow for low-cycle fatigue using the damage index", Thin-Walled Structures, 153, pp.106800~ (2020)
- American Society of Mechanical Engineers, "ASME Boiler and Pressure Vessel Code. Section III", ~ (2004)