연마방법에 따른 복합레진의 표면특성 평가
Effects of Polishing Methods on the Surface Characteristics of Composite Resins
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 연구는 복합레진의 연마방법에 따른 표면특성을 평가하기 위해, microhybrid 레진(FiltekTM Z250)과 nanofill 레진(FiltekTM Z350)을 연마 전, abrasive disk(Sof-lex) 연마 후, polishing brush(Occlubrush) 연마 후로 나누어 분석하였다. 그 결과 레진 표면조도는 연마 후 증가하였는데, 미세조도는 연마방법에 따른 차이가 없었으나 거시조도는 Occlubrush를이용한 경우 현저하게 커졌다(p < 0.05). Sof-lex 연마의 경우 레진의 filler까지 연마되어 표면이 보다 균일한 형상을 보였으나 Occlubrush 연마시편은 기질층이 뜯겨져 나간 불균일한 형상을 보였다. 두 연마방법 간의 미세경도 유의차는 없었으며(p > 0.05), 연마 후 경도 값이 약 25% 상승하였다. 결론적으로, 복합레진의 표면경도 향상을 위하여 적합한 연마가 필요하며, Sof-lex를 이용한 연마가 더 우수한 것으로 사료된다.
Abstract
The aim of this study was to evaluate the surface characteristics of composite resins polished with two different polishing methods. 30 disk-shaped specimens were prepared with microhybrid (FiltekTM Z250) and nanofilled (FiltekTM Z350) resins respectively, and classified into three groups: not polished as controls, polished by an abrasive disk (Soflex), and polished by a polishing brush (Occlubrush). Surface roughness was increased after polishing. In terms of micro-roughness, there were no significant differences between the two polishing methods. But macro-roughness values were markedly increased in the Occlubrush group (p < 0.05). In the Sof-lex group, the matrix and fillers were polished together, resulting into a smoother and homogeneous surface. However, in the Occlubrush group, the matrix layer was torn off, with more heterogeneous surfaces and large scratches. In regards to micro-hardness, no significant differences were observed between the two polishing systems (p > 0.05). And the hardness value increased about 25% after polishing. In conclusion, the method of polishing should be chosen deliberately in view of the hardness characteristics of composite resins. Sof-lex is recommended to improve the surface characteristics of polished resins.
참고문헌 (20)
- Ferracane JL, "Resin composite - state of art", Dent Mater, 27, pp.29~38 (2011)
- Yap AU, "Occlusal contact area (OCA) wear of two new composite restoratives", J Oral Rehabil, 29, pp.194~200 (2002)
- Yildiz E, "Color stability and surface roughness of polished anterior restorative materials", Dent Mater J, 34, pp.629~639 (2015)
- Kim KH, "The effect of filler loading and morphology on the mechanical properties of contemporary composites", J Prosthet Dent, 87, pp.642~649 (2002)
- Koupis NS, "Review:finishing and polishing procedures of (resin-modified)glass ionomers and compomers in paediatric dentistry", Eur Arch Paediatr Dent, 8, pp.22~28 (2007)
- Peyton JH, "Finishing and polishing techniques:direct composite resin restorations", Pract Proced Aesthet Dent, 16, pp.293~298 (2004)
- Bollen CM, "Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature", Dent Mater, 13, pp.258~269 (1997)
- Reis AF, "Effects of various finishing systems on the surface roughness and staining susceptibility of packable composite resins", Dental Mater, 19, pp.12~18 (2003)
- Da Costa J, "The effect of different polishing systems on surface roughness and gloss of various resin composites", J Esthet Restor Dent, 19, pp.214~224 (2007)
- Erdermir U, "The effect of one-step and multi-step polishing systems on the surface roughness and microhardness of novel resin composites", Eur J Dent, 6, pp.198~205 (2012)
- Giacomelli L, "Surface roughness of commercial composites after different polishing protocols: an analysis with atomic force microscopy", Open Dent J, 4, pp.191~194 (2010)
- Barbosa SH, "Effect of different finishing and polishing techniques on the surface roughness of microfilled, hybrid and packable composite resins", Braz Dent J, 16, pp.39~44 (2005)
- St-Georges AJ, "Surface finish produced on three resin composites by new polishing systems", Oper Dent, 30, pp.593~597 (2005)
- Yap AU, "Finishing", polishing of composite and compomer restoratives: effectiveness of one-step systems, 2004, pp.29, 275~279
- Lu H, "Effect of polishing systems on the surface roughness of microhybrid composites", J Esthet Restor Dent, 15, pp.297~303 (2003)
- Paravina RD, "Effect of finishing and polishing procedures on surface roughness, gloss and color of resin-based composites", Am J Dent, 17, pp.262~266 (2004)
- Ryba TM, "Surface roughness of various packable composites", Oper Dent, 27, pp.243~247 (2002)
- Kakaboura A, "Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter", J Mater Sci Mater Med, 18, pp.155~163 (2007)
- Chandler HH, "Method for finishing composite restorative materials", J Am Dent Assoc, 83, pp.344~348 (1971)
- Christensen R, "Comparison of instruments and commercial pastes used for finishing and polishing composite resin", Gen Dent, 29, pp.40~45 (1981)