연속 섬유의 펼침에 대한 기술 현황 및 적용
Review : Continuous Fiber Tow Spreading Technologies and Its Applications
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
연속 섬유의 펼침에 대한 기술 현황 및 이의 적용에 대해 본 연구에서 정리되었다. 이론적 접근을 통해 연속 섬유 펼침의 효과를 소개하였고, 섬유 펼침 수단과 섬유 펼침 장치의 공정 상 위치를 기준으로 연속 섬유의 펼침에 대한 기술을 분류 정리하였다. 또한, 각 기술의 일반적인 섬유 펼침 원리, 기술적용 및 기술의 장 단점에 대해 소개하였으며, 향후 연속 섬유의 펼침에 대한 기술 연구 방향에 대해서도 고려되었다.
Abstract
This paper reviewed the continuous fiber tow spreading technologies and its applications. The effect of the continuous fiber tow spreading in manufacturing process of continuous fiber reinforced thermoplastic composite was introduced theoretically. The fiber tow spreading technologies were categorized according to the spreading medium and its order during manufacturing process. The general principles, the applications, and the merits and demerits of fiber tow spreading technologies were introduced. Furthermore, the proposal for future direction of research on this issue was considered in this study.
참고문헌 (17)
- Mazumdar S. K., "Composites Manufacturing: Materials, Product, and Process Engineering" (2002), CRC Press LLC.
- Krishan K. C., "Composite Materials: Science and Engineering, 2nd edition" (1998), Springer
- Kim, T. W., "A Study on the Effect of Pressure on the Resin Impregnation of Fiber Bundles", Composites Research, 1(1), pp.67~72 (1988)
- Chang, I. Y., "Recent Development in Thermoplastic Composites: A Review of Matrix Systems and Processing Methods", Journal of Thermoplastic Composite Materials, 1, pp.277~296 (1988)
- Pandita, S. D., "Clean Wet-filament Winding – Part 1 : Design Concept and Simulations", Journal of Composite Materials, 47(3), pp.379~390 (2013)
- Weustink, A. P. D., "Development of a Rapid Thermoplastic Impregnation Device", 박사, pp.2008
- Henk, B., "Impregnation of Glass Rovings with a Polyamide Melt. Part 1: Impregnation Bath", Composites Manufacturing, 4(2), pp.85~92 (1993)
- Irfan, M. S., "Lateral Spreading of a Fiber Bundle Via Mechanical Means", Journal of Composite Materials, 46(3), pp.311~330 (2012)
- Wilson, S. D. R., "Lateral Spreading of Fibre Tows", Journal of Engineering Mathematics, 32, pp.19~26 (1997)
- Roh, J. U., "Processing of Thermoplastic Composites Reinforced with Long Fibers for Large Volume Applications", Proceeding of the 8th Asian-Australasian Conference on Composite Materials (2012)
- Roh, J. U., "Effect of Fiber Spreading on Impregnation of Thermoplastic into Continuous Fiber Bundle", Proceeding of the SAMPE 2012 (2012)
- Claire, S. -M., "A Model for Thermoplastic Melt Impregnation of Fiber Bundles During Consolidation of Powder-impregnated Continuous Fiber Composites", Composites Part A : Applied Science and Manufacturing, 41(1), pp.93~100 (2010)
- Ogden, A. L., "The Development of an Alternative Thermoplastic Powder Prepregging Technique", Journal of Thermoplastic Composite Materials, 5(1), pp.14~31
- Markus, B., "New Approach to Manufacture Thermoplastic Composites Using In-situ Impregnation Tape Placement Process", Proceeding of the SAMPE 2012 (2012)
- Sihn, S. W., "Experimental Studies of Thin-ply Laminated Composites", Composites Science and Technology, 67(6), pp.996~1008 (2007)