선박해양구조물의 유지보수 단계 수명주기관리 정보 시스템의 개념 설계와 구현
Conceptual Design of Product & Asset Lifecycle Management System for Marine Structures During Middle of Life
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Recently, both the integration of product data during design and production and the effective management of information during full lifecycles have attracted attention from shipyards and ship owners as a result of recycling regulations and a desire for efficient operations. Generally,PLM (Product Lifecycle Management) supports a collaborative environment during the BOL (Beginningof Life) stage, while an ALM (Asset Lifecycle Management) system provides all of the information required to maintain, overhaul, and discard/recycle all or part of a vessel during the MOL (Middle of Life) and EOL (End of Life) stages. The main goal of this paper is to suggest the fundamental configuration of a PALM (Product Asset Lifecylce Management) system and a method that can be used to utilize a marine vessel’s lifecycle information during the MOL, emphasizing the maintenance information during the middle of life. The authors also suggest a PALM system configuration in which lifecycle information can be collected by a PEID (Product Embedded Information Device) integrating a microcomputer, sensors, and wireless network communication. Through a prototype PALM system, the suggested featuresand PALM system configuration are implemented.
Abstract
Recently, both the integration of product data during design and production and the effective management of information during full lifecycles have attracted attention from shipyards and ship owners as a result of recycling regulations and a desire for efficient operations. Generally,PLM (Product Lifecycle Management) supports a collaborative environment during the BOL (Beginningof Life) stage, while an ALM (Asset Lifecycle Management) system provides all of the information required to maintain, overhaul, and discard/recycle all or part of a vessel during the MOL (Middle of Life) and EOL (End of Life) stages. The main goal of this paper is to suggest the fundamental configuration of a PALM (Product Asset Lifecylce Management) system and a method that can be used to utilize a marine vessel’s lifecycle information during the MOL, emphasizing the maintenance information during the middle of life. The authors also suggest a PALM system configuration in which lifecycle information can be collected by a PEID (Product Embedded Information Device) integrating a microcomputer, sensors, and wireless network communication. Through a prototype PALM system, the suggested featuresand PALM system configuration are implemented.
참고문헌 (31)
- 김승현, "4-계층 모델 기반의 선박 수명주기관리 시스템 프레임워크", 한국CAD, 2010, pp.15(5), 362~374[DOI]
- 소승욱, "선박 수명주기 관리를 위한 CMMS 개발 추진사례", 2010 PLM 컨소시엄컨퍼런스 (2010)
- Abawi, D.F., "Accuracy in Optical Tracking with Fiducial Markers: An Accuracy Function for ARToolKit", Proceedings of the Third IEEE and ACM International Symposium on Mixed and Augmented Reality (ISMAR 2004), pp.260~261 (2004)
- Chang, T.C., "Ship Recycling and Marine Pollution", Marine Pollution Bulletin, 60(9), pp.1390~1396 (2010)
- Clark, J.O., "System of Systems Engineering and Family of Systems Engineering from a Standards Perspective", IEEE International Conference on System of Systems Engineering 2008 (SoSE ’08), pp.1~6 (2008)
- Fernández, J.F., "Framework for Implementation of Maintenance Management in Distribution Network Service Providers", Reliability Engineering and System Safety, 94, pp.1639~1649 (2009)
- Hassanain, M.A., "Framework Model for Asset Maintenance Management", Journal of Performance of Constructed Facilities, 17(1), pp.51~64 (2003)
- Jardine, A., "A Review on Machinery Diagnostics and Prognostics Implementing Condition- Based Maintenance", Mechanical Systems and Signal Process, 20(7), pp.1483~1510 (2006)
- Jun, H.B., "System Architecture for Closed-Loop PLM", International Jorunal of Computer integrated Manufacturing, 20(7), pp.684~698 (2007)
- Iung, B., "Conceptual Framework for e-Maintenance: Illustration by E-Maintenance Technologies and Platforms", Annual Reviews in Control, 33(2), pp.220~229 (2009)
- Kiritsis, D., "Ubiquitous Product Lifecycle Management Using Product Embedded Information Devices", paper presented at Intelligent Maintenance System (IMS) 2004 International Conference (2004)
- Lebold, M., "Open Standards for Condition-Based Maintenance and Prognostic Systems", Proceeding of MARCON - fifth annual maintenance and reliability conference (2001)
- 이장현, "Product Asset Lifecycle Management system supported by Product Embedded Information", SNAME 2011 Annual Meeting and ship production Symposium, pp.533~540 (2011), Society of Naval Architects and Marine Enginners
- 이장현, "Integration of evolutional BOMs for design of ship outfitting equipment", COMPUTER-AIDED DESIGN, 44(3), pp.253~273, ELSEVIER SCI LTD
- Lin, S., "Developing a Data Quality Framework for Asset Management in Engineering Organisations", International Journal of Information Quality, 1(1), pp.100~126 (2007)
- Mohamed, Z.O., "Towards an Approach to Select an asset Information Management Strategy", International Journal of Computer Science and Applications, 5(3), pp.25~44 (2008)
- Muller, A., "On the Concept of E-Maintenance Review and Current Research", Reliability Engineering and System Safety, 93, pp.1165~1187 (2008)
- Ong, S.K., "Augmented Reality Applications in Manufacturing : a Survey", International Journal of Production Research, 46(10), pp.2707~2742 (2008)
- Popko, E.S., "IBM Maximo asset management with PLM combined", ~ (2008)
- Przekop, L.A., "Life Cycle Tools for Future Product Sustainability", The IEEE International Symposium on Electronics and the Environment 2004, pp.23~26 (2004)
- Sakamura, K., "The TRON Project", Information and Software Technology, 38(3), pp.239~251 (1996)
- SAP, "SAP Enterprise Asset Management", ~ (2007)
- Schuman, C.A., "Asset Life Cycle Management: Towards Improving Physical Asset Performance in The Process Industry", International Journal of Operations & Production Management, 25(6), pp.566~579 (2005)
- Shang, S., "Assessing and Managing the Benefits of Enterprise Systems: the Business Manager’s Perspective", Information Systems Journal, 12, pp.271~299 (2002)
- Shu, Q., "A Conceptual Framework for Product Lifecycle Modeling", Enterpriser Information Systems, 1(3), pp.353~363 (2007)
- Sudarsan, R., "A Product Information Modeling Framework for Product Lifecycle Management", Computer-Aided Design, 37(13), pp.1399~1411 (2005)
- Wellner, P., "Computer- Augmented Environments: Back to the Real World", Communication of ACM, 36(7), pp.24~25 (1993)
- Xu, X.S., "A framework for product lifecycle management system", 2006 International Conference on Management Science and Engineering (ICMSE ‘06), pp.526~530 (2006)
- Xu, X.W., "A Web-Enabled PDM System in a Collaborative Design Environment", Robotics and Computer Integrated Manufacturing, 19, pp.315~328 (2003)
- Yang, X., "Product Lifecycle Information Acquisition and Management for Consumer Products", Industrial Management & Data Systems, 107(7), pp.936~953 (2007)
- Yang, X., "Intelligent Products: From Lifecycle Data Acquisition to Enabling Product- Related Services", Computers in Industry, 60(3), pp.184~194 (2009)