선박해양구조물의 제품수명주기 내 유지보수 정보 획득을 위한 PEID에 관한 연구
Development of PEID for Acquiring Maintenance Information during Product Lifecycle of Marine Vessels
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The product lifecycle of a marine vessel can be classified into the design‐production, operation‐maintenance, and disposal phases. During the operation and maintenance phase, status data should be gathered from the major machinery and instruments installed on the marine vessel in order to perform efficient maintenance work. Although a PLM (product lifecycle management) system can manage the product information during the design and assembly stage, a PLM based on asset management technology is more appropriate for product information management during the operation stage. Product embedded information devices (PEIDs) are suggested for gathering real‐time maintenance information during the operation and maintenance lifecycle. A PEID allows PLM to provide the capability of offering active information exchange between the lifecycle management system and equipment. This study designed a PEID to effectively obtain information and interact with a PLM system. It consists of sensors, wireless communication, and a micro‐processor, which allow it to accumulate status data on the PLM system. The embedded information device and PLM enable the seamless information flow, tracking, and updating of MRO (maintenance repair and overhaul) information for a product throughout the middle of the product lifecycle.
Abstract
The product lifecycle of a marine vessel can be classified into the design‐production, operation‐maintenance, and disposal phases. During the operation and maintenance phase, status data should be gathered from the major machinery and instruments installed on the marine vessel in order to perform efficient maintenance work. Although a PLM (product lifecycle management) system can manage the product information during the design and assembly stage, a PLM based on asset management technology is more appropriate for product information management during the operation stage. Product embedded information devices (PEIDs) are suggested for gathering real‐time maintenance information during the operation and maintenance lifecycle. A PEID allows PLM to provide the capability of offering active information exchange between the lifecycle management system and equipment. This study designed a PEID to effectively obtain information and interact with a PLM system. It consists of sensors, wireless communication, and a micro‐processor, which allow it to accumulate status data on the PLM system. The embedded information device and PLM enable the seamless information flow, tracking, and updating of MRO (maintenance repair and overhaul) information for a product throughout the middle of the product lifecycle.
참고문헌 (39)
- 김승현, "4-계층 모델 기반의 선박 수명주기관리 시스템 프레임워크", 한국CAD, 2010, pp.15(5), 362~374[DOI]
- 김승현, "선박해양구조물의 유지보수 단계 수명주기관리 정보 시스템의 개념 설계와 구현", 한국해양공학회지, 26(2), pp.58~67 (2012), 한국해양공학회[DOI]
- 김진태, "RFID와 ZigBee를 이용한 유비쿼터스 u-Health 시스템 구현", 전자공학회논문지 - TC, 43(1), pp.79~88 (2006), 대한전자공학회
- 소승욱, "선박 수명주기 관리를 위한 CMMS 개발 추진사례", 2010 PLM 컨소시엄컨퍼런스 (2010)
- 이경호, "동시공학적 선박설계를 위한 웹 기반의 협업설계 시스템", 한국해양공학회지, 18(6), pp.37~43 (2004), 한국해양공학회
- 정완영, "신경회로망 알고리즘과 ATmega128칩을 활용한자동차용 지능형 AQS 시스템", 제어.로봇.시스템학회 논문지, 12(6), pp.539~546 (2006), 제어·로봇·시스템학회
- 황선기, "ZigBee의 영상 전송을 이용한 침입자 탐지 시스템 구현", 보안공학연구논문지, 6(4), pp.241~252 (2009), 보안공학연구지원센터
- Bodenhoefer, K., "Environmental life cycle information management and acquisition: first experiences and results from field trials", Proceedings of the Conference on Electronics Goes Green 2004 (2004)
- Chang, K. P., "Reliability Assessment of Reliquefaction Systems on LNG Carriers", Reliability Engineering and System Safety, 93(9), pp.1345~1353 (2008)
- Cao, H., "RFID in Product Lifecycle Management: A Case in the Automotive Industry", International Journal of Computer Integrated Manufacturing, 22(7), pp.616~637 (2012)
- Dalpiaz, G., "Effectiveness of Vibration Processing Techniques for Local Fault Detection", Mechanical Systems and Signal Processing, 14(3), pp.387~412 (2000)
- Technical Paper-Hot Surfaces, "DnV", ~, pp.Engine Rooms Paper Series No. 2000-P025 (2000)
- EPCglobal, "EPC Information Services (EPCIS) Version1.0 Specification", working draft, ~ (2006)
- Fernández, J.F., "Framework for Implementation of Maintenance Management in Distribution Network Service Providers", Reliability Engineering & System Safety, 94(10), pp.1639~1649 (2009)
- FZ750BC Manual VERSION 0.1.7, "Zigbee Embedded Modules FZ750BS", pp.2003, Firmtech
- Forss, B., "PROMISE DR6.5: interface definition and designof enterprise communication infrastructure", ~ (2006)
- Grall, A., "A Conditionbased Maintenance Policy for Stochastically Deteriorating Systems", Reliability Engineering and System Safety, 76, pp.167~180 (2002)
- Gulledge, T., "Conditionbased Maintenance and the Product Improvement Process", Computers in Industry, 61(9), pp.813~832 (2010)
- Jakkhupan, W., "Business Process Analysis and Simulation for the RFID and EPCglobal Network Enabled Supply Chain: A Proof-ofconcept Approach", Journal of Network and Computer Applications, 34(3), pp.949~957 (2011)
- Jardine, A.K.S., "A Review on Machinery Diagnostics and Prognostics Implementing Condition-based Maintenance", Mechanical Systems and Signal Process, 20(7), pp.1483~1510 (2006)
- Jun, H.B., "Research Issues on Closed-loop PLM", Computers in Industry, 58(8-9), pp.855~868 (2007)
- Jun, H. B., "A Framework for RFID Applications in Product Lifecycle Management", International Journal of Computer Integrated Manufacturing, 22(7), pp.595~165 (2009)
- 김승현, "선박 배관 설계를 위한 Enterprise BOM의 설계와 구현", 한국CAD, 2011, pp.16(1), 41~51[DOI]
- Kiritsis, D., "Closed-loop PLM for Intelligent Products in the Era of the Internet of Things", Computer-Aided Design, 43(5), pp.479~501 (2011)
- Liu, Z., "Online Rotor Mixed Fault Diagnosis Way Based onSpectrum Analysis of Instantaneous Power in SquirrelCage Induction Motors", IEEE Transactions on EnergyConversion, 19(3), pp.485~490 (2004)
- Lopéz, T. S., "RFID and Sensor Integration Standards: State and Future Prospects", Computer Standards & Interfaces, 33(3), pp.207~213 (2011)
- Miller, A. J., "A New Wavelet Basis for the Decomposition of Gear Motion Error Signals and its Application to Gearbox Diagnostics", 박사, pp.1999
- MIMOSA, "OpenO&M™ CIR Specification A Common Interoperability Registry V1.0", ~ (2010)
- Moore, P.R., "Life Cycle Data Acquisition Methods and Devices", Proceedingsof the 7th Mechatronics Forum International Conference(Mechatronics 2000) (2000)
- Muller, A., "On the Concept of E-maintenance: Review and Current Research", Reliability Engineering and System Safety, 93(8), pp.1165~1187 (2008)
- 박홍석, "Disassembly Process Planning of End-of-Life Car", International Journal of Precision Engineering and Manufacturing, 6(1), pp.42~50 (2005), 한국정밀공학회
- Pandian, A., "A Review of Recent Trends in Machine Diagnosis and Prognosis Algorithms", International Journal of Computer Information Systems and Industrial Management Applications, 2, pp.320~328 (2010)
- Simon, M., "Product Design Informed by Lifecycle Information:Initial Results from ELIMA", Proceedings of the2nd International Conference on Manufacturing Research(ICMR2004), pp.103~122 (2004)
- Simon, M., "Life Cycle Data Acquisition Unit-design, Implementation, Economics and Environmental Benefits", Proceedings of the IEEE International Symposium on Electronics & the Environment, pp.284~289 (2000)
- Thomas, G., "Condition-based Maintenance and the Product Improvement Process", Computers in Industry, 61(9), pp.813~832 (2010)
- Xiaoyu, Y., "Intelligent Products: From Lifecycle Data Acquisition to Enabling Product-related Services", Computers in Industry, 60(3), pp.184~194 (2009)
- Wang, Y., "Wireless Sensing Technologies for Civil Infrastructure Monitoring and Management", 5th International Symposium for Safety of Infrastructure, U-Safety for Infrastructure (2007)
- Williams, J. H., "Condition Based Maintenance and Machine Diagnostics" (1994), Chapman & Hall
- Yang, X., "Intelligent products: From Lifecycle Data Acquisition to Enabling Productrelated services", Computers in Industry, 60(3), pp.184~194 (2009)