Computed tomographic analysis of maxillary sinus anatomy relevant to sinus lift procedures in edentulous ridges in Taiwanese patients
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Purpose: To analyze the maxillary sinus anatomy over edentulous ridges in the bilateral posterior maxillary area in Taiwanese patients using cone-beam computed tomography (CBCT). Methods: In total, 101 anatomical sites from 61 patients, including 32 premolar and 69 molar regions, were analyzed using CBCT. Measurements were made of the width and height of edentulous ridges, the thickness of the lateral wall of the maxillary sinus, and the presence of a sinus septum and the posterior superior alveolar artery (PSAA). A statistical analysis of the measurements was performed, and correlations among the measurements were assessed. Results: The average ridge width was 10.26±3.16 mm, with a significantly greater ridge width in the second molar region than in the premolar region. The mean residual ridge height was 8.55±4.09 mm, and ridge height showed an opposite trend from ridge width for the premolar and molar regions. A sinus septum was present at 5.9% of the sites, and the PSAA was observed in 24.5%. The average thickness of the lateral wall of the maxillary sinus was 2.08±0.94 mm, with no significant difference between the tooth position and lateral wall thickness. Conclusions: This study presents the anatomical features of the maxillary sinus, which should be considered in sinus lift procedures for implant placement, in the Taiwanese population. The use of CBCT is recommended to avoid intraoperative complications.
Abstract
Purpose: To analyze the maxillary sinus anatomy over edentulous ridges in the bilateral posterior maxillary area in Taiwanese patients using cone-beam computed tomography (CBCT). Methods: In total, 101 anatomical sites from 61 patients, including 32 premolar and 69 molar regions, were analyzed using CBCT. Measurements were made of the width and height of edentulous ridges, the thickness of the lateral wall of the maxillary sinus, and the presence of a sinus septum and the posterior superior alveolar artery (PSAA). A statistical analysis of the measurements was performed, and correlations among the measurements were assessed. Results: The average ridge width was 10.26±3.16 mm, with a significantly greater ridge width in the second molar region than in the premolar region. The mean residual ridge height was 8.55±4.09 mm, and ridge height showed an opposite trend from ridge width for the premolar and molar regions. A sinus septum was present at 5.9% of the sites, and the PSAA was observed in 24.5%. The average thickness of the lateral wall of the maxillary sinus was 2.08±0.94 mm, with no significant difference between the tooth position and lateral wall thickness. Conclusions: This study presents the anatomical features of the maxillary sinus, which should be considered in sinus lift procedures for implant placement, in the Taiwanese population. The use of CBCT is recommended to avoid intraoperative complications.
참고문헌 (46)
- Shanbhag S, "Cone-beam computed tomographic analysis of sinus membrane thickness, ostium patency, and residual ridge heights in the posterior maxilla: implications for sinus floor elevation", Clin Oral Implants Res, 25, pp.755~760 (2014)
- Kang SJ, "Anatomical structures in the maxillary sinus related to lateral sinus elevation: a cone beam computed tomographic analysis", Clin Oral Implants Res, 24(Suppl A100), pp.75~81 (2013)
- Rosano G, "Maxillary sinus vascular anatomy and its relation to sinus lift surgery", Clin Oral Implants Res, 22, pp.711~715 (2011)
- Neugebauer J, "Evaluation of maxillary sinus anatomy by cone-beam CT prior to sinus floor elevation", Int J Oral Maxillofac Implants, 25, pp.258~265 (2010)
- Acharya A, "Residual ridge dimensions at edentulous maxillary first molar sites and periodontal bone loss among two ethnic cohorts seeking tooth replacement", Clin Oral Implants Res, 25, pp.1386~1394 (2014)
- Ball R, "A comparison between Chinese and Caucasian head shapes", Appl Ergon, 41, pp.832~839 (2010)
- Gu Y, "Comparison of craniofacial characteristics of typical Chinese and Caucasian young adults", Eur J Orthod, 33, pp.205~211 (2011)
- Nunes LS, "Anatomical characteristics and dimensions of edentulous sites in the posterior maxillae of patients referred for implant therapy", Int J Periodontics Restorative Dent, 33, pp.337~345 (2013)
- Sahrmann P, "Success of 6-mm implants with single-tooth restorations: a 3-year randomized controlled clinical trial", J Dent Res, 95, pp.623~628 (2016)
- Mertens C, "Use of 8-mm and 9-mm implants in atrophic alveolar ridges: 10-year results", Int J Oral Maxillofac Implants, 27, pp.1501~1508 (2012)
- Deporter D, "Performance of titanium alloy sintered poroussurfaced (SPS) implants supporting mandibular overdentures during a 20-year prospective study", Clin Oral Implants Res, 25, pp.e189~e195 (2014)
- Daniel Stefan Thoma, "Treatment concepts for the posterior maxilla and mandible: short implants versus long implants in augmented bone", Journal of Periodontal & Implant Science, 47(1), pp.2~12 (2017), 대한치주과학회
- Atieh MA, "Survival of short dental implants for treatment of posterior partial edentulism: a systematic review", Int J Oral Maxillofac Implants, 27, pp.1323~1331 (2012)
- Wang HL, "ABC sinus augmentation classification", Int J Periodontics Restorative Dent, 28, pp.383~389 (2008)
- Tatum H Jr, "Maxillary and sinus implant reconstructions", Dent Clin North Am, 30, pp.207~229 (1986)
- Tatum OH Jr, "Sinus augmentation. Rationale, development, longterm results", N Y State Dent J, 59, pp.43~48 (1993)
- Boyne PJ, "Grafting of the maxillary sinus floor with autogenous marrow and bone", J Oral Surg, 38, pp.613~616 (1980)
- Pjetursson BE, "Maxillary sinus floor elevation using the (transalveolar) osteotome technique with or without grafting material. Part I: Implant survival and patients' perception", Clin Oral Implants Res, 20, pp.667~676 (2009)
- Kim MJ, "Maxillary sinus septa: prevalence, height, location, and morphology. A reformatted computed tomography scan analysis", J Periodontol, 77, pp.903~908 (2006)
- Krennmair G, "The incidence, location, and height of maxillary sinus septa in the edentulous and dentate maxilla", J Oral Maxillofac Surg, 57, pp.667~671 (1999)
- Maestre-Ferrín L, "Maxillary sinus septa: a systematic review", Med Oral Patol Oral Cir Bucal, 15, pp.e383~e386 (2010)
- Pommer B, "Prevalence, location and morphology of maxillary sinus septa: systematic review and meta-analysis", J Clin Periodontol, 39, pp.769~773 (2012)
- Solar P, "Blood supply to the maxillary sinus relevant to sinus floor elevation procedures", Clin Oral Implants Res, 10, pp.34~44 (1999)
- Güncü GN, "Location of posterior superior alveolar artery and evaluation of maxillary sinus anatomy with computerized tomography: a clinical study", Clin Oral Implants Res, 22, pp.1164~1167 (2011)
- Zijderveld SA, "Anatomical and surgical findings and complications in 100 consecutive maxillary sinus floor elevation procedures", J Oral Maxillofac Surg, 66, pp.1426~1438 (2008)
- Hur MS, "Clinical implications of the topography and distribution of the posterior superior alveolar artery", J Craniofac Surg, 20, pp.551~554 (2009)
- Elian N, "Distribution of the maxillary artery as it relates to sinus floor augmentation", Int J Oral Maxillofac Implants, 20, pp.784~787 (2005)
- Traxler H, "Arterial blood supply of the maxillary sinus", Clin Anat, 12, pp.417~421 (1999)
- Barone A, "A clinical study of the outcomes and complications associated with maxillary sinus augmentation", Int J Oral Maxillofac Implants, 21, pp.81~85 (2006)
- Kim YK, "Closure of large perforation of sinus membrane using pedicled buccal fat pad graft: a case report", Int J Oral Maxillofac Implants, 23, pp.1139~1142 (2008)
- Maksoud MA, "Complications after maxillary sinus augmentation: a case report", Implant Dent, 10, pp.168~171 (2001)
- Wallace SS, "Maxillary sinus elevation by lateral window approach: evolution of technology and technique", J Evid Based Dent Pract, 12, pp.161~171 (2012)
- Wallace SS, "Schneiderian membrane perforation rate during sinus elevation using piezosurgery: clinical results of 100 consecutive cases", Int J Periodontics Restorative Dent, 27, pp.413~419 (2007)
- Danesh-Sani SA, "A comprehensive clinical review of maxillary sinus floor elevation: anatomy, techniques, biomaterials and complications", Br J Oral Maxillofac Surg, 54, pp.724~730 (2016)
- Kaufman E, "Maxillary sinus elevation surgery: an overview", J Esthet Restor Dent, 15, pp.272~283 (2003)
- Stern A, "Sinus lift procedures: an overview of current techniques", Dent Clin North Am, 56, pp.219~233 (2012)
- Guerrero JS, "Lateral wall sinus floor elevation for implant placement: revisiting fundamentals and the surgical technique", J Calif Dent Assoc, 41, pp.185~187 (2013)
- Barone A, "Osteotomy and membrane elevation during the maxillary sinus augmentation procedure. A comparative study: piezoelectric device vs. conventional rotative instruments", Clin Oral Implants Res, 19, pp.511~515 (2008)
- Lambert F, "One-step approach for implant placement and subantral bone regeneration using bovine hydroxyapatite: a 2- to 6-year follow-up study", Int J Oral Maxillofac Implants, 25, pp.598~606 (2010)
- Baldini N, "Lateral approach for sinus floor elevation: large versus small bone window - a split-mouth randomized clinical trial", Clin Oral Implants Res, 28, pp.974~981 (2017)
- Yang SM, "Computed tomographic assessment of maxillary sinus wall thickness in edentulous patients", J Oral Rehabil, 39, pp.421~428 (2012)
- Neiva RF, "Morphometric analysis of implant-related anatomy in Caucasian skulls", J Periodontol, 75, pp.1061~1067 (2004)
- Schropp L, "Bone healing and soft tissue contour changes following single-tooth extraction: a clinical and radiographic 12-month prospective study", Int J Periodontics Restorative Dent, 23, pp.313~323 (2003)
- Tan WL, "A systematic review of post-extractional alveolar hard and soft tissue dimensional changes in humans", Clin Oral Implants Res, 23(Suppl 5), pp.1~21 (2012)
- Cho SC, "Influence of anatomy on Schneiderian membrane perforations during sinus elevation surgery: three-dimensional analysis", Pract Proced Aesthet Dent, 13, pp.160~163 (2001)
- Janner SF, "Characteristics and dimensions of the Schneiderian membrane: a radiographic analysis using cone beam computed tomography in patients referred for dental implant surgery in the posterior maxilla", Clin Oral Implants Res, 22, pp.1446~1453 (2011)