샌드위치형 레이돔의 전기적 성능개선 위한 성형압력 영향성 연구
A Study on Effects of the Cure Pressure for the Improvement of the Electrical Performance of the Sandwich Type Radome
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: This paper analyzes the phenomenon on the degradation of the electrical performance by the pressure in the manufacturing process of sandwich type radomes. Methods: This paper consists of two steps to analyze the relation between the electrical performance and the pressure. First, the thickness of the core of the flat panels which were fabricated with different pressure was measured with the microscope, and then the electrical performance of the flat panels was analyzed with simulation and experiment. Based on the results of the electrical performance and the measured thickness with respect to the flat panels, the relation between the electrical performance and the applied pressure in the manufacturing process was analyzed. Results: The simulated and measured results with respect to the flat panel shows that the high pressure results in the nonuniform thickness of the core, which is applied to the radome fabrication. As a result, the degradation of the electrical performance occurs because the unintended scattered field is generated as the electromagnetic wave transmits (or impinges upon) the radome. Furthermore, we observed that the electrical performance of both the flat panel and the radome got worse as the high pressure was applied. Conclusion: Through simulation and experiment, therefore, it is demonstrated that for the high pressure in the manufacturing process the nonuniform thickness of the core increases and results in the degradation of the electrical performance of the radome.
Abstract
Purpose: This paper analyzes the phenomenon on the degradation of the electrical performance by the pressure in the manufacturing process of sandwich type radomes. Methods: This paper consists of two steps to analyze the relation between the electrical performance and the pressure. First, the thickness of the core of the flat panels which were fabricated with different pressure was measured with the microscope, and then the electrical performance of the flat panels was analyzed with simulation and experiment. Based on the results of the electrical performance and the measured thickness with respect to the flat panels, the relation between the electrical performance and the applied pressure in the manufacturing process was analyzed. Results: The simulated and measured results with respect to the flat panel shows that the high pressure results in the nonuniform thickness of the core, which is applied to the radome fabrication. As a result, the degradation of the electrical performance occurs because the unintended scattered field is generated as the electromagnetic wave transmits (or impinges upon) the radome. Furthermore, we observed that the electrical performance of both the flat panel and the radome got worse as the high pressure was applied. Conclusion: Through simulation and experiment, therefore, it is demonstrated that for the high pressure in the manufacturing process the nonuniform thickness of the core increases and results in the degradation of the electrical performance of the radome.
참고문헌 (15)
- A. Kedar, "Parametric study of flat sandwich multilayer radome. Progress in Electromagnetics Research", PIER, 66, pp.253~265 (2006)
- C. Park, "Missile Radome Analysis using Surface Integration Method", 1st Annual IEEK SP Technology Conference, 21(1) (1997)
- D. J. Kozakoff., "Analysis of radome-enclosed antennas", pp.81~84 (2010), Archech House
- "Fiber Reinforced Epoxy Prefreg. 121℃ Cure. 83PS006", ~
- Gordon, R. K., "Finite element analysis of axisymmetirc radomes", IEEE Trans. Antennas Propagat, 41(7), pp.975~981 (1993)
- H. Choi, "Bondline Strength Evaluation of Honeycomb Sandwich Panel For Cure Process and Moisture Absorption", Korean Soc. Mech. Eng, 25(1), pp.115~126 (2000)
- "IEEE Standard Test Procedures for Antennas", IEEE Std 149(R2008), ~
- J. A. Shifflett., "CADDRAD: a physical optics radar", radome analysis code for arbitrary 3D geometries, 1997, pp.39, 73~79
- J. D. Walton., "Radome Engineering Handbook" (1970), Marcel Dekker Inc
- "5985-4003. FWD HB XMT Radome", Korea Defence Standard, ~ (2010)
- O. I. Sukharevsky, "Volume integral equation analysis of a two dimensional radome with a sharp nose", IEEE Trans. Antennas Propagt, 53(4), pp.1500~1506 (2005)
- 강신민, "레이돔 제조 공정과정에서 유전율에 미치는 영향 인자에 대한 연구", 한국정보통신학회논문지, 13(2), pp.221~226 (2009), 한국정보통신학회
- W. Kim, "3D isotropic dispersion (ID)-FDTD algorithm: update equation and characteristics analysis", IEEE Trans. Antennas Propagt, 58(4), pp.1251~1259 (2010)
- X. C. Nie, "Fast analysis of electromagnetic transmission through arbitrary shaped airborne radome using precorrected-FFT method. Progress in Electromagnetics Research", PIER, 54, pp.37~59 (2005)
- Y. L. Zou, "Modified mode decomposition for analyzing antennas with body of revolution radome", Journal of Electromagnetic Waves Applications, 21(10), pp.1403~1410 (2007)