재활용 메타 아라미드와 TPP 복합용액의 제조 및 면섬유 코팅 후 특성분석
Characteristics of Recycled m-Aramid and TPP Complex Solutions in Preparation and Cotton Fibers after Coating
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Cotton fabrics treated with hybrid materials were developed and prepared. A halogen-free flame retardant and an aromatic amide were blended and applied to cotton fabrics. Thermal and physical properties of the treated cotton fabrics were investigated. The surface of the pure and coated cotton fabrics was characterized by Fourier transform infrared spectroscopy. The elemental composition of the coated surface of the cotton fabric was measured using X-ray photoelectron spectroscopy and compared with that of pure cotton fabric. After being solved in N,N-dimethylacetamide, m-aramid and triphenylphosphine oxide (TPP) were applied to cotton fabrics through a dip-pad-coagulation process. The treated cotton fabrics with recycled m-aramid/TPP resulted in increased limited oxygen index values and thermal resistance.
Abstract
Cotton fabrics treated with hybrid materials were developed and prepared. A halogen-free flame retardant and an aromatic amide were blended and applied to cotton fabrics. Thermal and physical properties of the treated cotton fabrics were investigated. The surface of the pure and coated cotton fabrics was characterized by Fourier transform infrared spectroscopy. The elemental composition of the coated surface of the cotton fabric was measured using X-ray photoelectron spectroscopy and compared with that of pure cotton fabric. After being solved in N,N-dimethylacetamide, m-aramid and triphenylphosphine oxide (TPP) were applied to cotton fabrics through a dip-pad-coagulation process. The treated cotton fabrics with recycled m-aramid/TPP resulted in increased limited oxygen index values and thermal resistance.
참고문헌 (14)
- S. S. Park, "The Definition Technical Textiles and Current Trends", J. of FITI, 34(1), pp.27~ (2006)
- Technical Textiles, "M. H. Seo", Korea Institute of Science and Technology Information, 1~43 (2004)
- 홍진표, "아라미드 소재의 침염 및 날염", 한국염색가공학회지, 23(4), pp.298~303 (2011), 한국염색가공학회
- 박성민, "저온 플라즈마 처리를 이용한 파라 아라미드 섬유의 표면 개질 효과 및 역학적 특성", 한국염색가공학회지, 24(2), pp.131~137 (2012), 한국염색가공학회[DOI]
- H. H. Yang, "Kevlar Aramid Fiber" (1993), John Wiley & Sons
- W. K. Kim, "Heat-resistant Aramid Fibers", Fiber Technology and Industry, 11(4), pp.205~ (2007)
- 김삼수, "Improved Antimicrobial Efficacy of m-Aramid", 한국염색가공학회지, 21(5), pp.58~62 (2009), 한국염색가공학회
- T. Hongu, "New Fibers", pp.14~ (1997), Woohead Publishing
- Y. Washino, "Functional Fiber, Trend in Technology and Product Development in Japan", pp.105~106 (1993), Toray Research Center Inc
- D. L. Pavia, "Introduction to Spectroscopy", pp.26~75 (1979)
- 강세미, "키토산", 세리신 블렌드 필름의 구조 및 특성, 2012, pp.49(1), 66~74[DOI]
- 김지영, "m-Aramid Films in Diverse Coagulants", 한국염색가공학회지, 21(4), pp.63~67 (2009), 한국염색가공학회
- S. S. Kim, "Antimicrobial Polyethylene Terephthalate( PET) Treated with an Aromatic N-halamine Precursor, m-Aramid", J. of Applied Polymer Science, 114(6), pp.3835~ (2009)
- P. Jain, "Potential of Silver Nanoparticle- Coated Polyurethane Foam As an Antibacterial Water Filter", pp.59~63 (2005), Wiley Periodicals Inc