그리스 윤활 하에서 표면요철의 영향
Effects of Surface Texturing under Grease Lubrication
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
It is well known that surface texturing improves the tribological properties of mechanical components for enhancing hydro-dynamic effect or serving as a micro reservoir. There are not, however, enough researches to reveal the effects of surface texturing on the tribological properties under grease lubrication which is used in lubricating many mechanical elements. In the present study, therefore, the effects of surface texturing on the tribological properties are investigated under grease lubrication based on an experimental approach. The results show that surface texturing decreases friction coefficient. It is found that the friction coefficient can be decreased by controlling the diameter and density of micro-dimple. The diameter of dimple is more effective under high load and low speed than otherwise. And, the density of dimple is effective under low load and high speed.
Abstract
It is well known that surface texturing improves the tribological properties of mechanical components for enhancing hydro-dynamic effect or serving as a micro reservoir. There are not, however, enough researches to reveal the effects of surface texturing on the tribological properties under grease lubrication which is used in lubricating many mechanical elements. In the present study, therefore, the effects of surface texturing on the tribological properties are investigated under grease lubrication based on an experimental approach. The results show that surface texturing decreases friction coefficient. It is found that the friction coefficient can be decreased by controlling the diameter and density of micro-dimple. The diameter of dimple is more effective under high load and low speed than otherwise. And, the density of dimple is effective under low load and high speed.
참고문헌 (9)
- Hamilton,D.B., "A Theory of Lubrication by Microasperities", ASME Journal of Basic Engneering, 88(1), pp.177~188 (1966)
- Anno,J.N., "Microasperity Lubrication", ASME Journal of Lubrication of Technolog, 90(2), pp.351~355 (1968)
- Anno,J.N., "Load Support and Leakage from Microasperity-Lubricated Face Seals", ASME Journal of Lubrication of Technology, 91(4), pp.726~731 (1969)
- Etsion,I., "A Model for Mechanical Seals with Regular Microsurface Structure", Tribology Transaction, 39(3), pp.677~683 (1996)
- Etsion,I., "Increasing Mechanical Seal Life with Laser-Textured Seal Faces", 15th International Conference on Fluid Sealing BHR Group,Maastricht, pp.3~11 (1997)
- Wang, X., "Loads Carrying Capacity Map for The Surface Texture Design of SiC Thrust Bearing Sliding in Water", Tribology International, 36(3), pp.189~197 (2003)
- Wang, X., "The Effect of Laser Texturing of SiC Surface on the Critical Load for the Transition of Water Lubrication Mode from Hydrodynamic to Mixed", Tribology International, 34(10), pp.703~711 (2001)
- Wang,X., "Improving the Anti-Seizure Ability of SiC Seal in Water with RIE Texturing", Tribology Letter, 14(4), pp.275~280 (2003)
- Wakuda, M., "Effect of Surface Texturing on Friction Reduction Between Ceramic and Steel Materials under Lubricated Sliding Contact", Wear, 254, pp.356~363 (2003)