Scanning acoustic microscopy for material evaluation
1
조회
0
다운로드
0
인용
0
참고문헌
초록
Scanning acoustic microscopy (SAM) or Acoustic Micro Imaging (AMI) is a powerful, non-destructive technique that can detect hidden defects in elastic and biological samples as well as non-transparent hard materials. By monitoring the internal features of a sample in three-dimensional integration, this technique can efficiently find physical defects such as cracks, voids, and delamination with high sensitivity. In recent years, advanced techniques such as ultrasound impedance microscopy, ultrasound speed microscopy, and scanning acoustic gigahertz microscopy have been developed for applications in industries and in the medical field to provide additional information on the internal stress, viscoelastic, and anisotropic, or nonlinear properties. X-ray, magnetic resonance, and infrared techniques are the other competitive and widely used methods. However, they have their own advantages and limitations owing to their inherent properties such as different light sources and sensors.This paper provides an overview of the principle of SAM and presents a few results to demonstrate the applications of modern acoustic imaging technology. A variety of inspection modes, such as vertical, horizontal, and diagonal cross-sections have been presented by employing the focus pathway and image reconstruction algorithm. Images have been reconstructed from the reflected echoes resulting from the change in the acoustic impedance at the interface of the material layers or defects. The results described in this paper indicate that the novel acoustic technology can expand the scope of SAM as a versatile diagnostic tool requiring less time and having a high efficiency.
Abstract
Scanning acoustic microscopy (SAM) or Acoustic Micro Imaging (AMI) is a powerful, non-destructive technique that can detect hidden defects in elastic and biological samples as well as non-transparent hard materials. By monitoring the internal features of a sample in three-dimensional integration, this technique can efficiently find physical defects such as cracks, voids, and delamination with high sensitivity. In recent years, advanced techniques such as ultrasound impedance microscopy, ultrasound speed microscopy, and scanning acoustic gigahertz microscopy have been developed for applications in industries and in the medical field to provide additional information on the internal stress, viscoelastic, and anisotropic, or nonlinear properties. X-ray, magnetic resonance, and infrared techniques are the other competitive and widely used methods. However, they have their own advantages and limitations owing to their inherent properties such as different light sources and sensors.This paper provides an overview of the principle of SAM and presents a few results to demonstrate the applications of modern acoustic imaging technology. A variety of inspection modes, such as vertical, horizontal, and diagonal cross-sections have been presented by employing the focus pathway and image reconstruction algorithm. Images have been reconstructed from the reflected echoes resulting from the change in the acoustic impedance at the interface of the material layers or defects. The results described in this paper indicate that the novel acoustic technology can expand the scope of SAM as a versatile diagnostic tool requiring less time and having a high efficiency.
참고문헌 (38)
- P. Anastasiadis, "High-frequency time-resolved scanning acoustic microscopy for biomedical applications", Open Neuroimaging J, 12, pp.69~85 (2018)[DOI]
- F. Bertocci, "Scanning acoustic microscopy (SAM): A robust method for defect detection during the manufacturing process of ultrasound probes for medical imaging", Sensors, 19, pp.4868~4886 (2019)[DOI]
- B. Bilen, "Determination of ultrastructural properties of human carotid atherosclerotic plaques by scanning acoustic microscopy, micro-computer tomography, scanning electron microscopy and energy dispersive X-ray spectroscopy", Sci. Rep., 9(679), pp.1~10 (2019)[DOI]
- B. T. Bilen, "Scanning acoustic microscopy of quantum dot aggregates", Biomed. Phys. Eng. Express, 5, pp.065025~ (2019)[DOI]
- S. Brand, "Scanning acoustic gigahertz microscopy for metrology applications in threedimensional integration technologies", J. Micro, 2014, pp.13(1), 011207-1~011207-9
- S. Cruz, "Analysis of the bonding process and materials optimization for mitigating the yellow border defect on optically bonded automotivedisplay panels", Displays, 48, pp.21~28 (2017)[DOI]
- I. Demirkana, "Determining sodium diffusion through acoustic impedance measurements using 80 MHz scanning acoustic microscopy:Agarose phantom verification", Ultrasonics, 94, pp.10~19 (2019)[DOI]
- A. S. Dukhin, "Ch. 3 - Fundamentals of Acoustics in Homogeneous Liquids", Longitudinal Rheology, 24, pp.91~125 (2010)[DOI]
- N. Hozumia, "Three-dimensional acoustic impedance mapping of cultured biological cells", Ultrasonics, 99, pp.105966-1~105966-4 (2019)[DOI]
- J. Kim, "Spatio-temporal compressed quantitative acoustic microscopy", IEEE International Ultrasonics Symposium (2019)
- A. Kubit, "Analysis of the effect of structural defects on the fatigue strength of RFSSW joints using C-scan scanning acoustic microscopy and SEM", Fatigue Fract. Eng. Mater. Struct, 42(6), pp.1308~1321 (2019)[DOI]
- A. I. Kustov, "Development of methods of acoustic microscopy inspection for monitoring of structure and properties of coatings for various purposes", Mater. Today Proc, 11, pp.203~211 (2019)[DOI]
- H. Liang, "The auto-focus method for scanning acoustic microscopy by sparse representation", Sens. Imaging, 20, pp.33~48 (2019)[DOI]
- R. Gr. Maev, "Acoustic Microscopy: Fundamentals and Applications", pp.1~20 (2008), Wiley-VCH Verlag
- R. Gr. Maev, "Advances in Acoustic Microscopy and High Resolution Imaging: From Principles to Applications", pp.1~21 (2013), Wiley-VCH Verlag
- R.Gr. Maev, "Acoustic microscopy for materials characterization Materials Characterization Using Nondestructive Evaluation (NDE)", pp.161~176 (2016), Woodhead Publishing
- E. S. Morokov, "Spatial resolution of acoustic microscopy in the visualization of interfaces inside a solid", Acoust. Phys, 65, pp.165~170 (2019)[DOI]
- H. Park, "Analyzing acoustic characteristics of multi-channel speaker directly driving flat panel display: Considering the acoustic stereo effects", Soc. Inf. Display, 50(1), pp.1634~1636 (2019)[DOI]
- Y. Qiu, "Study on the pin delamination of plastic encapsulated microcircuits using scanning acoustic microscope", IEEE 2017 Prognostics and System Health Management Conference, pp.1~5 (2017)
- Y. Qiu, "Counterfeit identification method of plastic encapsulated microcircuits using scanning acoustic microscope", J. Phys. Conf. Ser, 1074, pp.012102-1~012102-6 (2018)[DOI]
- Y. Saijo, "Acoustic microscopy : Latest developments and applications", Imaging Med. Imaging Med, 1(1), pp.47~63 (2009)
- Y. Saijo, "Ultrasound Speed and Impedance Microscopy for in vivo Imaging", IEEE Engineering in Medicine and Biology Society, pp.1350~1135 (2007)
- Y. Saijo, "Acoustic inhomogeneity of carotid arterial plaques determined by GHz frequency range acoustic microscopy", Ultrasound Med. Biol, 28(7), pp.933~937 (2002)
- Yoshifumi Saijo, "Ultrasonic Tissue Characterization of Atherosclerosis by a Speed-of-Sound Microscanning System", IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 54(8), pp.1571~1577 (2007), Institute of Electrical and Electronics Engineers (IEEE)[DOI]
- Y. Saijo, "Sound speed scanning acoustic microscopy for biomedical applications", Technol. Health Care, 13(4), pp.261~267 (2005)[DOI]
- Y. Saijo, "Ultrasonic tissue characterization of infarcted myocardium by scanning acoustic", Ultrasound Med. Biol, 23, pp.77~85 (1997)[DOI]
- F. Schubert, "Handbook of Advanced. Non-Destructive Evaluation 1. Acoustic Microscopy", pp.1~40 (2018), Springer
- R. Shannon, "A system for detecting failed electronics using acoustics", IEEE Instrum. Meas. Mag, 22(4), pp.32~37 (2019)[DOI]
- C. J. R. Sheppard, "Ch. 8 - Scanning optical microscopy", Adv. Imaging Electron Phys, 213, pp.227~325 (2020)[DOI]
- C. Song, "Acoustic lens with variable focal length for photoacoustic microscopy", J. Appl. Phys, 114, pp.194703-1~194703-5 (2013)[DOI]
- T. Takezaki, "Improvement in lateral resolution of through-transmission scanning acoustic tomography using capacitive micromachined ultrasound transducer", Microelectron. Reliab, 93, pp.22~28 (2019)[DOI]
- K. Wang, "Performance analysis of ethylene-propylene diene monomer soundabsorbing materials based on image processing recognition", EURASIP J. Image Video Process, 128, pp.1~10 (2018)[DOI]
- Z. Wang, "Intelligent detection of flip chip with the scanning acoustic microscopy and the general regression neural network", Microelectr. Eng, 217(15), pp.111127-1~111127-6 (2019)[DOI]
- M. Wüst, "3-D Scanning Acoustic Microscope for Investigation of Curved-Structured Smart Material Compounds", Adv. Eng. Mater., 20, pp.1800409-1~1900409-8 (2018)[DOI]
- X. Yang, "Multi-layer polymer-metal structures for acoustic impedance matching in high-frequency broadband ultrasonic transducers design", Appl. Acoust, 160, pp.107123-1~107123-6 (2020)[DOI]
- W. Yared, "Void distribution in a brazed cemented carbide steel joint analyzed by X-ray microscopy", Measurement, 141, pp.250~257 (2019)[DOI]
- Y. Zhu, "Metal pitting corrosion characterized by scanning acoustic microscopy and binary image processing", Corros. Sci, 170, pp.108685-1~108685-8 (2020)[DOI]
- Y. Zhu, "Microstructure size measurement based on C-scan image of scanning acoustic microscopy", Instrum. Meas. Metrologie, 18(1), pp.63~68 (2019)[DOI]