A Case Study of Paraffin Double-walled Microencapsulation Preparation Using Acrylic Polymer and Melamine Polymer for Thermal Energy Storage
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, we investigated the paraffin encapsulation using double-walled encapsulation technique. The first encapsulation used methyl methacrylic acid as the main component in acrylic polymer and the second encapsulation used melamine polymer. Particles size and distribution of the capsules were analyzed using scanning electron microscopy. In the first encapsulation, the stable capsules were obtained at 67% of phase change material ratio to methyl methacrylic acid monomer and the size of the capsule was from 0.2 to 0.3μm. In the second encapsulation, the size of the capsules was almost the same with those capsules prepared in the first encapsulation. The particle size of single wall and double wall was about 0.3μm. As a result of the encapsulation of paraffin using double-walled encapsulation technique, it was confirmed that the particle size was determined in the process of encapsulating using the acrylic polymer at the first wall material, and the physical and thermal stability of the capsules were imparted using melamine at the secondary wall material.
Abstract
In this study, we investigated the paraffin encapsulation using double-walled encapsulation technique. The first encapsulation used methyl methacrylic acid as the main component in acrylic polymer and the second encapsulation used melamine polymer. Particles size and distribution of the capsules were analyzed using scanning electron microscopy. In the first encapsulation, the stable capsules were obtained at 67% of phase change material ratio to methyl methacrylic acid monomer and the size of the capsule was from 0.2 to 0.3μm. In the second encapsulation, the size of the capsules was almost the same with those capsules prepared in the first encapsulation. The particle size of single wall and double wall was about 0.3μm. As a result of the encapsulation of paraffin using double-walled encapsulation technique, it was confirmed that the particle size was determined in the process of encapsulating using the acrylic polymer at the first wall material, and the physical and thermal stability of the capsules were imparted using melamine at the secondary wall material.
참고문헌 (17)
- Zalba, B., "Review on Thermal Energy Storage with Phase Change: Materials, Heat Transfer Analysis and Applications", Applied Thermal Engineering, 23(3), pp.251~283 (2003)
- Sharma, A., "Eview on Thermal Energy Storage with Phase Change Materials and Applications", Renewable and Sustainable Energy Reviews, 13(2), pp.318~345 (2009)
- Zhao, C. Y., "Heat Transfer Enhancement for Thermal Energy Storage Using Metal Foams Embedded with in Phase Change Materials (PCMs)", Solar Energy, 84(8), pp.1402~1412 (2010)
- Zhao, C. Y., "Review on Microencapsulated Phase Change Materials (MEPCMs): Fabrication, Characterization and Applications", Renewable and Sustainable Energy Reviews, 15(8), pp.3813~3832 (2011)
- Zhou, D., "Experimental Investigations on Heat Transfer in Phase Change Materials (PCMs)Embedded in Porous Materials", Applied Thermal Engineering, 31(5), pp.970~977 (2011)
- Han, X., "Experimental Study on Effect of Microencapsulated Phase Change Coating on Indoor Temperature Response and Energy Consumption", Advances in Mechanical Engineering, 9(6), pp.1687814017703901~ (2017)
- Su, W., "Preparation of Microencapsulated Phase Change Materials (MEPCM) for Thermal Energy Storage", Energy Procedia, 121, pp.95~101 (2017)
- Sun, N., "Synthesis and Performances of Phase Change Materials Microcapsules with a Polymer", BN, Energy & Fuels, pp.2017, 31(9)[DOI]
- Hawlader, M. N. A., "Microencapsulated PCM Thermal-energy Storage System", Applied Energy, 74(1), pp.195~202 (2003)
- Mahto, P. K., "Development of PCM (Paraffin wax) Based Latent Heat Storage Type Solar Powered Thermo-electric Generator", IOP Conference Series:Materials Science and Engineering, 377, pp.012188~ (2018)
- Ma, Y., "Synthesis and Thermal Properties of Acrylate-based Polymer Shell Microcapsules with Binary Core as Phase Change Materials", Materials Letters, 91, pp.133~135 (2013)
- Li, G. L., "Precipitation Polymerization for Fabrication of Complex-shell Hybrid Particles and Hollow Structures", Chemical Society Reviews, 42(8), pp.3628~3646 (2013)
- Al-Shannaq, R., "Emulsion Stability and Cross-linking of PMMA Microcapsules Containing Phase Change Materials", Solar Energy Materials and Solar Cells, 132, pp.311~318 (2015)
- Wu, G., "Effect of Temperature on Emulsion Polymerization of n-Butyl Acrylate", Procedia Engineering, 18, pp.353~357 (2011)
- Choi, J. K., "Preparation of Microcapsules Containing Phase Change Materials as Heat Transfer Media by In-Situ Polymerization", J Ind Eng Chem, 7(6), pp.358~362 (2001)
- Leach, K., "Effect of Manufacturing Conditions on the Formation of Double-walled Polymer Microspheres", Journal of Microencapsulation, 16(2), pp.153~167 (1999)
- Fei, X., "Microencapsulation Mechanism and Size Control of Fragrance Microcapsules with Melamine Resin Shell", Colloids and Surfaces A: Physicochemical and Engineering Aspects, 469, pp.300~306 (2015)