Investigations on properties of ceno PCM produced via sonication process for thermal comfort building
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The sustainable development can be achieved by means of optimal usage of energy in each and every industry. According toour building sector, eco-friendly construction is achieved by utilizing the resources in right way with minimal wastage andmaximum usage. The Phase Change Material is such a solution to build an energy efficient building with minimal consumptionof energy resources because of its thermal characteristics. The paper revealed the usage of encapsulated PCM in buildingconstruction to achieve thermal stability structure without affecting its strength and durability. Sonication method isimplemented to make a encapsulated PCM called Ceno-PCM. For the composite sample, cenosphere of 100 μm is mixedthoroughly with liquid paraffin under ultrasonic heat waves and the sample specimen shows the better results after it gettingdried in oven up to 80ºC. The experimental investigations are examined through FESEM EDX, TGA etc, to observe theperformance of the sample and it also gives the appreciable results. Mechanical properties are examined through the respectivetesting with the mortar specimen of different percentage level of Composite PCM and the results are summarized to concludethe optimal level of PCM.
Abstract
The sustainable development can be achieved by means of optimal usage of energy in each and every industry. According toour building sector, eco-friendly construction is achieved by utilizing the resources in right way with minimal wastage andmaximum usage. The Phase Change Material is such a solution to build an energy efficient building with minimal consumptionof energy resources because of its thermal characteristics. The paper revealed the usage of encapsulated PCM in buildingconstruction to achieve thermal stability structure without affecting its strength and durability. Sonication method isimplemented to make a encapsulated PCM called Ceno-PCM. For the composite sample, cenosphere of 100 μm is mixedthoroughly with liquid paraffin under ultrasonic heat waves and the sample specimen shows the better results after it gettingdried in oven up to 80ºC. The experimental investigations are examined through FESEM EDX, TGA etc, to observe theperformance of the sample and it also gives the appreciable results. Mechanical properties are examined through the respectivetesting with the mortar specimen of different percentage level of Composite PCM and the results are summarized to concludethe optimal level of PCM.
참고문헌 (20)
- Z. Zhai, , J. Archit. Eng, 20(4), pp.814~824 (2014)
- S. Chadhurvedi, , Proceedings of the 2008 Architectural Engineering Conference (AEI), pp.181~ (2008), ASCE Press
- T. Ling, , J. Constr. Build. Mater, 46, pp.55~62 (2013)
- M. Delgado, , Renew. Sust. Ener. Rev, 16(1), pp.253~273 (2012)
- Y. Zhang, , J. Build. Environ, 42, pp.2197~2209 (2007)
- N. Zhu, , J. Energy Convers. Manag, 50, pp.3169~3181 (2009)
- A. Waqas, , J. Renew. Sust. Energ. Rev, 18, pp.607~625 (2013)
- K. Biswas, , J. Appl. Ener, 131, pp.517~529 (2014)
- V. V. Tyagi, , J. Renew. Sust. Ener. Rev, 15, pp.1373~1391 (2011)
- C. Y. Zhao, , J. Renew. Sust. Energ. Rev, 15(8), pp.3813~3832 (2011)
- Y. Ozonur, , Int. J. Ener. Res, 30(10), pp.741~749 (2006)
- M. V. Pankova, , J. Chem. Sust. Develop, 18(18), pp.509~516 (2010)
- V. V. Tyagi, , J. Renew. Sust. Energ. Rev, 11, pp.1146~1166 (2007)
- L. F. Cabeza, , J. Renew. Sust. Energ. Rev, 15(15), pp.1675~1695 (2011)
- K. Kolay, , J. Fuel, 117, pp.118~124 (2014)
- A. Gharsallaoui, , J. Food Res. Int, 40(9), pp.1107~1121 (2007)
- T. Khadiran, , J. Solar Energ. Mater. Solar Cells, 143, pp.78~98 (2015)
- C. Voelker, , J. Energ. Build, 40(5), pp.937~944 (2008)
- A. F. Regin, , J. Renew. Sust. Energ. Rev, 12, pp.2438~2456 (2008)
- F. Liu, , J. Cem. Concr. Compos, 80, pp.317~325 (2017)