A study on heat dissipation design and trade-off analysis of air-cooled shipboard equipment with noise standards
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
"Reducing underwater radiated noise from a ship is a critical issue for ensuring the survivability of the vessel. As high-speed signal processing and interlocking algorithms become more sophisticated, the heat intensity of shipboard equipment is increasing per unit volume. When designing shipboard equipment, it is necessary to consider the trade-off between heat dissipation and noise reduction. Following an analysis of the trade-offs, it was determined that the arrangement of Fan Ass'y A and B exhibited excellent noise and heat dissipation characteristics. Based on this, PWM control operating zones were derived. It was determined that the placement of Fan Ass'y A and B in the operating zone would increase the PWM duty cycle from 33% to 58% using a signal frequency of 25kHz band with guaranteed reliability. This would increase the noise by approximately 9dB(A) but reduce the internal board reference temperature by up to 15℃."
Abstract
"Reducing underwater radiated noise from a ship is a critical issue for ensuring the survivability of the vessel. As high-speed signal processing and interlocking algorithms become more sophisticated, the heat intensity of shipboard equipment is increasing per unit volume. When designing shipboard equipment, it is necessary to consider the trade-off between heat dissipation and noise reduction. Following an analysis of the trade-offs, it was determined that the arrangement of Fan Ass'y A and B exhibited excellent noise and heat dissipation characteristics. Based on this, PWM control operating zones were derived. It was determined that the placement of Fan Ass'y A and B in the operating zone would increase the PWM duty cycle from 33% to 58% using a signal frequency of 25kHz band with guaranteed reliability. This would increase the noise by approximately 9dB(A) but reduce the internal board reference temperature by up to 15℃."
참고문헌 (8)
- Han, H. S., "Estimation of the Underwater Radiated Noise of a Naval Vessel Using Hull Vibration", Transactions of the Korean Society for Noise and Vibration Engineering, 23(5), pp.394~400 (2013)
- Han, H. S., "Development of the Anti-Vibration Base for the Onboard Equipment of the Naval Vessel Using Sandwich Panel", Transactions of the Korean Society for Noise and Vibration Engineering, 26(4), pp.365~374 (2016)
- Han, J. H., "Prediction of the Radiated Noise of a Structure Excited by Harmonic Force Using the Doubly Asymptotic Approximation", Transactions of the Korean Society for Noise and Vibration Engineering, 27(1), pp.51~56 (2017)
- "MIL-STD-740-1(SH), Airborne Sound Measurements and Acceptance Criteria of Shipboard Equipment", NAVSEA, ~ (1986)
- "MIL-STD-740-2(SH), Structureborne Vibratory Acceleration Measurements and Acceptance Criteria of Shipboard Equipment", NAVSEA, ~ (1986)
- Mark, B., "Why and How to Control Fan Speed for Cooling Electronic Equipment", Analog Dialogue, 38(02) (2004)
- SCHROFF, "AdvancedTCA", 2~3 (2018)
- Lee, S. H., "An Experimental Analysis of the Structure-Borne Noise Reduction", The Journal of the Acoustical Society of Korea, 33(2) (2014)