SCR 시스템의 효율적인 운영을 위한 Soot Blowing 방법에 대한 해석적 연구
Computational Study on the Soot Blowing Method for Enhancing the Performance of the SCR System
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
In the SCR (selective catalytic reduction) system which is used for controlling the NOx emission from the Diesel engines, the soot deposited on the catalysis causes degradation of the system performance. Numerical study was done to evaluate the performance of soot blower which is proposed as a method for removing the soot on the catalysis. The spray conditions and the effect of the compressed air from the AIG (air inlet gun) were analyzed numerically to evaluate the overall effective method of the soot blowing. The characteristics of the final velocity distribution and velocity waves across the inlet section of the catalysis were evaluated with respect to the geometries of the AIG outlets and pressure conditions. An experimental model was used to validate the results of the numerical calculation that is used for finding the effective removal blowing momentum transfer quantities of soot the inlet section of the catalysis, and it is proposed that the required minimum blowing momentum transfer quantities are over than 0.499 khgh/m.teff. in the current study.
Abstract
In the SCR (selective catalytic reduction) system which is used for controlling the NOx emission from the Diesel engines, the soot deposited on the catalysis causes degradation of the system performance. Numerical study was done to evaluate the performance of soot blower which is proposed as a method for removing the soot on the catalysis. The spray conditions and the effect of the compressed air from the AIG (air inlet gun) were analyzed numerically to evaluate the overall effective method of the soot blowing. The characteristics of the final velocity distribution and velocity waves across the inlet section of the catalysis were evaluated with respect to the geometries of the AIG outlets and pressure conditions. An experimental model was used to validate the results of the numerical calculation that is used for finding the effective removal blowing momentum transfer quantities of soot the inlet section of the catalysis, and it is proposed that the required minimum blowing momentum transfer quantities are over than 0.499 khgh/m.teff. in the current study.
참고문헌 (17)
- Ameya, P., "Studies on Soot Blower Jet Dynamics and Ash Deposit Removal in Industrial Boiler", Fuel Processing Technology, 3113, pp.8~16 (2011)
- ANSYS Inc., "FLUENT User's Guide, Ver. 12.0", ANSYS Inc, ~ (2009)
- ANSYS Inc., "FLUENT Theory Guide, Ver. 12.0", ANSYS Inc., ~ (2009)
- Beirle, S., "Estimate of Nitrogen Oxide Emission from Shipping by Satellite Remote Sensing", Geophysical Research Letters, 31 (2004)
- Ferziger, J. H., "Computational Methods for Fluid Dynamics", pp.23~25 (1999), Springer Berlin
- Ganesh, R., "Advance in Understanding Supersonic Jet Screech: Review and Perspective", Progress in aerospace sciences, 34(1-2), pp.45~106 (1998)
- Hassan, O., "Unstructured Tetrahedral Mesh Generation for Three-Dimensional Viscous Flows", International Journal for Numerical Methods in Engineering, 39, pp.549~567 (1996)
- "IMO (International Maritime Organization)", 1150~ (2004)
- 남인식, "Heating element of an air preheater in a utility boiler as an SCR reactor removing NO by NH3", INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 44(4), pp.707~714, AMER CHEMICAL SOC
- Khalighi, Y., "Unstructured Large Eddy Simulation for Prediction of Noise Issued from Turbulent Jet in Various Configurations", AIAA, 2010, 6~8
- 박미정, "소형 SCR 시스템 내 유동 제어를 위한 Baffle의 구조 결정에 관한 수치해석적 연구", 대한환경공학회지, 32(9), pp.862~869 (2010), 대한환경공학회
- 박선미, "패키지형 소형 SCR 시스템 내 NH_3 농도분포 제어를 위한 AIG의 배치에 관한 전산해석적 연구", 대한환경공학회지, 33(5), pp.368~377 (2011), 대한환경공학회
- Park, N., "Numerical and modeling issues in LES of compressible turbulence on unstructured grids, 45th AIAA Aerospace Science Meeting and Exhibit", pp.722~ (2007), The American Institute of Aeronautics and Astronautics Paper
- Rodi, R., "Comparison of LES and RANS calculations of the flow around bluff bodies", Journal of Wind Engineering and Industrial Aerodynamics, pp.55~75 (1997)
- Sergejus, L., "Investigating of the Performance and Emission Characteristics of Biodiesel Fuel Containing Butanol under the Conditions of Diesel Engine Operation", Energy Fuels, 24, pp.4503~4509 (2010)
- Tandra, D. S., "Numerical Simulation of Supersonic Jet Flow Using a Modified Model", International Journal of Computation Fluid Dynamic, 20, pp.19~27 (2006)
- Timothy, J. T., "The Generation of Hexahedral Meshes for Assemble Geometry : Survey and Progress", International journal for numerical methods in engineering, 50, pp.2617~2612 (2001)