임플란트 고정성 보철물의 교합적 고려사항
Considerations of Occlusion for Implant-Supported Fixed Prostheses
3
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The proper occlusal design is one of the most important factors for the long-term success. The purpose of this research is to investigate and define occlusal considerations to reduce failure of implant-supported fixed prostheses. The physiological movement of implants is markedly lower than that of natural teeth and they also lack in occlusal sensitivity. Proper occulsal pattern may be assigned to compensate for the biological disadvantages and occlusal contacts must be formed where the cantilever effect is minimized. Moreover, the long-term success can be assured by reducing early occulsal loading to avoid implant overloading and selecting appropriate occlusion material.
Abstract
The proper occlusal design is one of the most important factors for the long-term success. The purpose of this research is to investigate and define occlusal considerations to reduce failure of implant-supported fixed prostheses. The physiological movement of implants is markedly lower than that of natural teeth and they also lack in occlusal sensitivity. Proper occulsal pattern may be assigned to compensate for the biological disadvantages and occlusal contacts must be formed where the cantilever effect is minimized. Moreover, the long-term success can be assured by reducing early occulsal loading to avoid implant overloading and selecting appropriate occlusion material.
참고문헌 (21)
- Jemt T, "Failures and complications in 127 consecutively placed fixed partial prostheses supported by Brånemark implants: from prosthetic treatment to first annual checkup", The International Journal of Oral & Maxillofacial Implants, 7, pp.40~44 (1992)
- Misch CE, "Occlusion and crestal bone resorption: etiology and treatment planning strategies for implants, In Science and practice of occlusion" (1997), Quintessence
- Isidor F, "Loss of osteointegration caused by occlusal load of oral implants", Clinical Oral Implants Research, 7, pp.43~152 (1996)
- Misch CE, "Implant protected occlusion: a biomechanical rationale", Compendium of Continuing Education in Dentistry, 15, pp.1330~1343 (1994)
- Jemt T, "Changes of the general chewing pattern in complete denture wearers after insertion of bridges on osseointegrated oral implants in the lower jaw", the Symposium on Prosthetic Reconstructions on Osseointegrated Implants, pp.143~150 (1983)
- Gartner JL, "Effect of osseointegrated implants in the coordination of masticatory muscles: a pilot study", Journal of Prosthetic Dentistry, 84, pp.185~193 (2000)
- Muhlemann HR, "Tooth mobility: its cause and significance", Journal of Periodontology, 36, pp.148~153 (1965)
- Parfitt GS, "Measurement of the physiologic mobility of individual teeth in an axial direction", Journal of Dental Research, 39, pp.608~618 (1960)
- Sekine H, "Mobility characteristics and tactile sensitivity of osseointegrated fixturesupporting systems, In Tissue integration in oral maxillofacial reconstruction" (1986), Elsevier
- Jacobs R, "Comparative evaluation of oral tactile function by means of teeth or implant support prostheses", Clinical Oral Implants Research, 2, pp.75~80 (1991)
- Jacobs R, "Comparison between threshold level", The International Journal of Oral & Maxillofacial Implants, 8, pp.549~554 (1993)
- Misch CE, "Occlusal considerations for implant supported prostheses, In Comtemporary Implant Dentistry", pp.609~628 (1999), Mosby
- Shultz AW, "Comfort and chewing officiency in dentures", Journal of Prosthetic Dentistry, 65, pp.38~48 (1951)
- Hudson JD, "Enamel wear caused by three different restorative materials", Journal of Prosthetic Dentistry, 74, pp.647~654 (1995)
- Skalak R, "Aspects of biomechanical considerations, In Tissue integrated prostheses osseointegration in clinical dentistry" (1985), Quintessence
- Futoshi komine, "Current status of zirconia-based fixed restorations", Journal of Oral Science, 52(4), pp.531~539 (2010)
- Lee TH, "Effects of surface treatments on the susceptibilities of low temperature degradation by autoclaving in zirconia", Journal of Biomedical Materials Research Part B, 100B(5), pp.1334~1343 (2012)
- F Beuer, "In vitro performance of full-contour zirconia single crowns", Dental Materials, 28, pp.449~456 (2012)
- PE Spyropoulou, "Translucency of shaded zirconia core material", Journal of Prosthetic Dentistry, 105, pp.304~307 (2011)
- Alghazzawi TF, "Influence of Low- Temperature Environmental Exposure on the Mechanical Properties and Structural Stability of Dental Zirconia", Journal of Prosthodontics, 21, pp.363~369 (2012)
- 정유석, "A study on the in-vitro wear of the natural tooth structure by opposing zirconia or dental porcelain", The Journal of Advanced of Prosthodontics, 2(3), pp.111~115 (2010), 대한치과보철학회