Evaluation of spatial pressure distribution during ice-structure interaction using pressure indicating film
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Understanding of ‘spatial’ pressure distribution is required to determine design loads on local structures, such as plating and framing. However, obtaining a practical ‘spatial’ pressure distribution is a hard task due to the sensitivity of the data acquisition frequency and resolution. High-resolution Pessure-Idicating Flm (PIF) was applied to obtain pressure distribution and pressure magnitude using stepped crushing method. Different types of PIF were stacked at each test to creating a pressure distribution plot at specific time steps. Two different concepts of plotting ‘spatial’ pressure-area curve was introduced and evaluated. Diverse unit pixel size was chosen to investigate the effect of the resolution in data analysis. Activated area was not significantly affected by unit pixel size; however, total force was highly sensitive.
Abstract
Understanding of ‘spatial’ pressure distribution is required to determine design loads on local structures, such as plating and framing. However, obtaining a practical ‘spatial’ pressure distribution is a hard task due to the sensitivity of the data acquisition frequency and resolution. High-resolution Pessure-Idicating Flm (PIF) was applied to obtain pressure distribution and pressure magnitude using stepped crushing method. Different types of PIF were stacked at each test to creating a pressure distribution plot at specific time steps. Two different concepts of plotting ‘spatial’ pressure-area curve was introduced and evaluated. Diverse unit pixel size was chosen to investigate the effect of the resolution in data analysis. Activated area was not significantly affected by unit pixel size; however, total force was highly sensitive.
참고문헌 (16)
- Daley, C., "Ice edge contact and failure", Cold Regions Science and Technology, 21(1992), pp.1~23 (1992)
- MSI Ice loads data-compilation of medium scale ice indentation test results and comparison to ASPPR, "Daley, C.", National Research Council of Canada, ~, pp.TP 12151E (1994)
- A study of the process-spatial link in ice pressure-area relationships, "Daley, C.", National Research Council of Canada, ~, pp.NRC PERD (2004), CHC Report 7-108
- Daley, C., "Reanalysis of ice pressure-area relationships", Marine Technology, 44(4), pp.234~244 (2007)
- Frederking, R., "The Local pressure-area relation in ship impact with ice", Proceedings 15th International Conference on Port and Ocean Engineering under Arctic Conditions, POAC '99, pp.687~696 (1999)
- Frederking, R., "Ice pressure variations during indentation", 17th International Symposium on Ice, Saint Petersburg, pp.307~314 (2004)
- Gagnon, R., "Analysis of laboratory growler impact tests", Cold Regions Science and Technology, 39, pp.1~17 (2004)
- Gagnon, R., "Side-viewing high-speed video observations of ice crushing", 17th International Symposium on Ice, pp.289~298 (2004)
- Gagnon, R., "Analysis of data from bergy bit impacts using a novel hull-mounted external impact panel", Cold Regions Science and Technology, 52, pp.50~66 (2008)
- Gagnon, R., "A new impact panel to study bergy bit", ship collisons, 2008, 993~1000
- Kim, H., "Reappraisal of pressure distribution induced by ice-structure interaction using high-precision pressure measurement film", IceTech 2012, pp.191~199 (2012)
- Kim, H., "Reanalysis of pressure patterns and pressure-area curves considering resolution of pressure measurement film", POAC 2013 (2013)
- Liggins, A. B., "Calibration and manipulation of data from fuji pre-ssure-sensitive film", pp.61~70 (1992), Technology Transfer Between High Tech Engineering and Biomecha-nics
- Sayed, M., "Two-dimensional extrusion of crushed ice. Part 1 : experimental", Cold Regions Science and Technology, 21, pp.25~36 (1992)
- Sanderson, T. J. O., "Ice mechanics: Risks to offshore structures" (1988), Graham and Trotman Ltd
- Ulan-Kvitberg, C. A., "Adapting pressure films to measure pressure patterns in ice-steel interaction experiments", 석사, pp.2012